rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c
index 08e3172..52cf133 100644
--- a/cpu/mpc8220/dramSetup.c
+++ b/cpu/mpc8220/dramSetup.c
@@ -34,9 +34,9 @@
DECLARE_GLOBAL_DATA_PTR;
-#define SPD_SIZE CFG_SDRAM_SPD_SIZE
-#define DRAM_SPD (CFG_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
-#define TOTAL_BANK CFG_SDRAM_TOTAL_BANKS
+#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE
+#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
+#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS
int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
{
@@ -103,7 +103,7 @@
/* Enable Port Configuration for SDA and SDL signals */
pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
__asm__ ("sync");
- pcfg->pcfg3 &= ~CFG_I2C_PORT3_CONFIG;
+ pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
__asm__ ("sync");
/* Points the structure to I2c mbar memory offset */
@@ -144,7 +144,7 @@
break;
}
- pi2cReg->adr = CFG_I2C_SLAVE<<1;
+ pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
pi2cReg->cr = I2C_CTL_EN; /* Set Enable */
@@ -541,7 +541,7 @@
}
/* Set up the Drive Strength register */
- sysconf->sdramds = CFG_SDRAM_DRIVE_STRENGTH;
+ sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
/* ********************** Cfg 1 ************************* */
@@ -679,7 +679,7 @@
/* Set up mode value for CAS latency */
-#if (CFG_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
+#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
#else