rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/cpu/mpc8xx/upatch.c b/cpu/mpc8xx/upatch.c
index 4d6c522..a8cb735 100644
--- a/cpu/mpc8xx/upatch.c
+++ b/cpu/mpc8xx/upatch.c
@@ -1,8 +1,8 @@
#include <common.h>
#include <commproc.h>
-#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) || \
- defined(CFG_SMC_UCODE_PATCH)
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+ defined(CONFIG_SYS_SMC_UCODE_PATCH)
static void UcodeCopy (volatile cpm8xx_t *cpm);
@@ -11,36 +11,36 @@
immr->im_cpm.cp_rccr &= ~0x0003; /* Disable microcode program area */
UcodeCopy ((cpm8xx_t *)&immr->im_cpm); /* Copy ucode patch to DPRAM */
-#ifdef CFG_SPI_UCODE_PATCH
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
{
volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI];
/* Activate the microcode per the instructions in the microcode manual */
/* NOTE: We're only relocating the SPI parameters (not I2C). */
immr->im_cpm.cp_cpmcr1 = 0x802a; /* Write Trap register 1 value */
immr->im_cpm.cp_cpmcr2 = 0x8028; /* Write Trap register 2 value */
- spi->spi_rpbase = CFG_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */
+ spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */
}
#endif
-#ifdef CFG_I2C_UCODE_PATCH
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
{
volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC];
/* Activate the microcode per the instructions in the microcode manual */
/* NOTE: We're only relocating the I2C parameters (not SPI). */
immr->im_cpm.cp_cpmcr3 = 0x802e; /* Write Trap register 3 value */
immr->im_cpm.cp_cpmcr4 = 0x802c; /* Write Trap register 4 value */
- iip->iic_rpbase = CFG_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */
+ iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */
}
#endif
-#ifdef CFG_SMC_UCODE_PATCH
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
{
volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1];
/* Activate the microcode per the instructions in the microcode manual */
/* NOTE: We're only relocating the SMC parameters. */
immr->im_cpm.cp_cpmcr1 = 0x8080; /* Write Trap register 1 value */
immr->im_cpm.cp_cpmcr2 = 0x8088; /* Write Trap register 2 value */
- up->smc_rpbase = CFG_SMC_DPMEM_OFFSET; /* Where to relocte SMC params */
+ up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET; /* Where to relocte SMC params */
}
#endif
@@ -48,14 +48,14 @@
* Enable DPRAM microcode to execute from the first 512 bytes
* and a 256 byte extension of DPRAM.
*/
-#ifdef CFG_SMC_UCODE_PATCH
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
immr->im_cpm.cp_rccr |= 0x0002;
#else
immr->im_cpm.cp_rccr |= 0x0001;
#endif
}
-#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCh)
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh)
static ulong patch_2000[] = {
0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7,
@@ -191,4 +191,4 @@
}
}
-#endif /* CFG_I2C_UCODE_PATCH, CFG_SPI_UCODE_PATCH */
+#endif /* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */