rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 4c26b36..ec37687 100644
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -35,7 +35,7 @@
#include <ide.h>
#include <ata.h>
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
extern int curr_device;
#define DEBUG_SATA 0 /*For debug prints set DEBUG_SATA to 1 */
@@ -173,10 +173,10 @@
iobase4 | ATA_PCI_CTL_OFS;
port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
- for (i = 0; i < CFG_SATA_MAXBUS; i++)
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++)
sata_port (&port[i].ioaddr);
- for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
if (!(sata_bus_probe (i))) {
port[i].port_state = 0;
printf ("SATA#%d port is not present \n", i);
@@ -190,15 +190,15 @@
}
}
- for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
u8 j, devno;
if (port[i].port_state == 0)
continue;
- for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
+ for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) {
sata_identify (i, j);
set_Feature_cmd (i, j);
- devno = i * CFG_SATA_DEVS_PER_BUS + j;
+ devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
if ((sata_dev_desc[devno].lba > 0) &&
(sata_dev_desc[devno].blksz > 0)) {
dev_print (&sata_dev_desc[devno]);
@@ -206,7 +206,7 @@
init_part (&sata_dev_desc[devno]);
if (curr_device < 0)
curr_device =
- i * CFG_SATA_DEVS_PER_BUS + j;
+ i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
}
}
}
@@ -271,7 +271,7 @@
port[num].dev_mask = 0;
- for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) {
if (!(sata_devchk (&port[num].ioaddr, i))) {
PRINTF ("dev_chk failed for dev#%d\n", i);
} else {
@@ -328,7 +328,7 @@
void
sata_identify (int num, int dev)
{
- u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev;
+ u8 cmd = 0, status = 0, devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev;
u16 iobuf[ATA_SECT_SIZE];
u64 n_sectors = 0;
u8 mask = 0;
@@ -564,10 +564,10 @@
}
#endif
/*Port Number */
- num = device / CFG_SATA_DEVS_PER_BUS;
+ num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
/*dev on the port */
- if (device >= CFG_SATA_DEVS_PER_BUS)
- dev = device - CFG_SATA_DEVS_PER_BUS;
+ if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+ dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
else
dev = device;
@@ -671,10 +671,10 @@
}
#endif
/*Port Number */
- num = device / CFG_SATA_DEVS_PER_BUS;
+ num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
/*dev on the Port */
- if (device >= CFG_SATA_DEVS_PER_BUS)
- dev = device - CFG_SATA_DEVS_PER_BUS;
+ if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+ dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
else
dev = device;