rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/drivers/usb/sl811_usb.c b/drivers/usb/sl811_usb.c
index 159cc25..48f1ee9 100644
--- a/drivers/usb/sl811_usb.c
+++ b/drivers/usb/sl811_usb.c
@@ -111,7 +111,7 @@
int usb_init_kup4x (void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
int i;
unsigned char tmp;
@@ -265,7 +265,7 @@
sl811_write(SL811_CTRL_A, ctrl);
while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
- if (5*CFG_HZ < get_timer(time_start)) {
+ if (5*CONFIG_SYS_HZ < get_timer(time_start)) {
printf("USB transmit timed out\n");
return -USB_ST_CRC_ERR;
}
diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c
index da11ecb..c1aac33 100644
--- a/drivers/usb/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -73,7 +73,7 @@
defined(CONFIG_440EP) || \
defined(CONFIG_PCI_OHCI) || \
defined(CONFIG_MPC5200) || \
- defined(CFG_OHCI_USE_NPS)
+ defined(CONFIG_SYS_OHCI_USE_NPS)
# define OHCI_USE_NPS /* force NoPowerSwitching mode */
#endif
@@ -89,13 +89,13 @@
/*
* e.g. PCI controllers need this
*/
-#ifdef CFG_OHCI_SWAP_REG_ACCESS
+#ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
# define readl(a) __swap_32(*((volatile u32 *)(a)))
# define writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
#else
# define readl(a) (*((volatile u32 *)(a)))
# define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#endif /* CFG_OHCI_SWAP_REG_ACCESS */
+#endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
@@ -129,13 +129,13 @@
#define info(format, arg...) do {} while(0)
#endif
-#ifdef CFG_OHCI_BE_CONTROLLER
+#ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
# define m16_swap(x) cpu_to_be16(x)
# define m32_swap(x) cpu_to_be32(x)
#else
# define m16_swap(x) cpu_to_le16(x)
# define m32_swap(x) cpu_to_le32(x)
-#endif /* CFG_OHCI_BE_CONTROLLER */
+#endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
/* global ohci_t */
static ohci_t gohci;
@@ -1819,13 +1819,13 @@
pci_dev_t pdev;
#endif
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
/* cpu dependant init */
if(usb_cpu_init())
return -1;
#endif
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
/* board dependant init */
if(usb_board_init())
return -1;
@@ -1873,21 +1873,21 @@
} else
return -1;
#else
- gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
+ gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
#endif
gohci.flags = 0;
- gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
+ gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
if (hc_reset (&gohci) < 0) {
hc_release_ohci (&gohci);
err ("can't reset usb-%s", gohci.slot_name);
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
/* board dependant cleanup */
usb_board_init_fail();
#endif
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
/* cpu dependant cleanup */
usb_cpu_init_fail();
#endif
@@ -1901,12 +1901,12 @@
err ("can't start usb-%s", gohci.slot_name);
hc_release_ohci (&gohci);
/* Initialization failed */
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
/* board dependant cleanup */
usb_board_stop();
#endif
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
/* cpu dependant cleanup */
usb_cpu_stop();
#endif
@@ -1932,13 +1932,13 @@
/* call hc_release_ohci() here ? */
hc_reset (&gohci);
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
/* board dependant cleanup */
if(usb_board_stop())
return -1;
#endif
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
/* cpu dependant cleanup */
if(usb_cpu_stop())
return -1;
diff --git a/drivers/usb/usb_ohci.h b/drivers/usb/usb_ohci.h
index 7a04bf5..c1af547 100644
--- a/drivers/usb/usb_ohci.h
+++ b/drivers/usb/usb_ohci.h
@@ -155,8 +155,8 @@
/*
* Maximum number of root hub ports.
*/
-#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
-# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#ifndef CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
+# error "CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS undefined!"
#endif
/*
@@ -191,7 +191,7 @@
__u32 a;
__u32 b;
__u32 status;
- __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
+ __u32 portstatus[CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS];
} roothub;
} __attribute((aligned(32)));
diff --git a/drivers/usb/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c
index 122793c..fa02003 100644
--- a/drivers/usb/usbdcore_mpc8xx.c
+++ b/drivers/usb/usbdcore_mpc8xx.c
@@ -133,7 +133,7 @@
int udc_init (void)
{
/* Init various pointers */
- immr = (immap_t *) CFG_IMMR;
+ immr = (immap_t *) CONFIG_SYS_IMMR;
cp = (cpm8xx_t *) & (immr->im_cpm);
usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
usbp = (usb_t *) & (cp->cp_scc[0]);
@@ -752,7 +752,7 @@
static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
{
if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
- *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
+ *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CONFIG_SYS_IMMR);
} else {
(*rx_cbdp)++;
@@ -780,7 +780,7 @@
usbp->uscom = 0x40 | 0;
/* reset ring */
- tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
+ tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CONFIG_SYS_IMMR);
tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
@@ -886,7 +886,7 @@
}
ep = epi->endpoint_address & 0x03;
- tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR);
if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
mpc8xx_udc_flush_tx_fifo (ep);
@@ -903,7 +903,7 @@
return -1;
}
- tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR);
while (tx_cbdp->cbd_sc & TX_BD_R) {
};
tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
@@ -1187,10 +1187,10 @@
volatile cpm8xx_t * cp)
{
-#if defined(CFG_USB_EXTC_CLK)
+#if defined(CONFIG_SYS_USB_EXTC_CLK)
/* This has been tested with a 48MHz crystal on CLK6 */
- switch (CFG_USB_EXTC_CLK) {
+ switch (CONFIG_SYS_USB_EXTC_CLK) {
case 1:
immr->im_ioport.iop_papar |= 0x0100;
immr->im_ioport.iop_padir &= ~0x0100;
@@ -1216,7 +1216,7 @@
break;
}
-#elif defined(CFG_USB_BRGCLK)
+#elif defined(CONFIG_SYS_USB_BRGCLK)
/* This has been tested with brgclk == 50MHz */
int divisor = 0;
@@ -1233,7 +1233,7 @@
divisor = (gd->cpu_clk / 48000000L) - 1;
cp->cp_sicr &= ~0x0000003F;
- switch (CFG_USB_BRGCLK) {
+ switch (CONFIG_SYS_USB_BRGCLK) {
case 1:
cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
cp->cp_sicr &= ~0x2F;
@@ -1256,7 +1256,7 @@
}
#else
-#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#error "CONFIG_SYS_USB_EXTC_CLK or CONFIG_SYS_USB_BRGCLK must be defined"
#endif
}