rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
index 9b84d1f..e61a3e1 100644
--- a/include/configs/ADNPESC1.h
+++ b/include/configs/ADNPESC1.h
@@ -34,7 +34,7 @@
#if defined(CONFIG_NIOS_BASE_32)
#include <configs/ADNPESC1_base_32.h>
#else
-#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
+#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
#endif
/*------------------------------------------------------------------------
@@ -42,36 +42,36 @@
*----------------------------------------------------------------------*/
#define CONFIG_NIOS 1 /* NIOS-32 core */
#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */
-#define CONFIG_SYS_CLK_FREQ CFG_NIOS_CPU_CLK/* 50 MHz core clock */
-#define CFG_HZ 1000 /* 1 msec time tick */
-#undef CFG_CLKS_IN_HZ
+#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
+#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
+#undef CONFIG_SYS_CLKS_IN_HZ
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
* BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_SDRAM_SIZE != 0)
+#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-#define CFG_SDRAM_BASE CFG_NIOS_CPU_SDRAM_BASE
-#define CFG_SDRAM_SIZE CFG_NIOS_CPU_SDRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
#else
-#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
#endif
-#if defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE)
+#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
-#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE
-#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE
+#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
+#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
#else
-#undef CFG_SRAM_BASE
-#undef CFG_SRAM_SIZE
+#undef CONFIG_SYS_SRAM_BASE
+#undef CONFIG_SYS_SRAM_SIZE
#endif
-#define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE
+#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
/*------------------------------------------------------------------------
* MEMORY ORGANIZATION - For the most part, you can put things pretty
@@ -85,44 +85,44 @@
* -Global data is placed below the heap.
* -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
/*------------------------------------------------------------------------
* FLASH (AM29LV065D)
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
+#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-#define CFG_FLASH_BASE CFG_NIOS_CPU_FLASH_BASE
-#define CFG_FLASH_SIZE CFG_NIOS_CPU_FLASH_SIZE
-#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
+#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
+#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size */
#else
-#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* ENVIRONMENT
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
+#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
/* Mem addr of environment */
#if defined(CONFIG_NIOS_BASE_32)
-#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#else
-#error *** CFG_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
+#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
#endif
#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
@@ -136,26 +136,26 @@
* NIOS APPLICATION CODE BASE AREA
*----------------------------------------------------------------------*/
#if ((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000)
-#define CFG_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100"
-#define CFG_ADNPESC1_NIOS_APPL_ENTRY "0x1050000"
-#define CFG_ADNPESC1_NIOS_APPL_IDENT "0x105000c"
-#define CFG_ADNPESC1_NIOS_APPL_END "0x11fffff"
-#define CFG_ADNPESC1_FILESYSTEM_BASE "0x1200000"
-#define CFG_ADNPESC1_FILESYSTEM_END "0x17fffff"
+#define CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100"
+#define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "0x1050000"
+#define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "0x105000c"
+#define CONFIG_SYS_ADNPESC1_NIOS_APPL_END "0x11fffff"
+#define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "0x1200000"
+#define CONFIG_SYS_ADNPESC1_FILESYSTEM_END "0x17fffff"
#else
-#error *** CFG_ERROR: missing right appl.code base configuration, expand your config.h
+#error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h
#endif
-#define CFG_ADNPESC1_NIOS_IDENTIFIER "Nios"
+#define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "Nios"
/*------------------------------------------------------------------------
* BOOT ENVIRONMENT
*----------------------------------------------------------------------*/
#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
-#define CFG_ADNPESC1_SLED_BOOT_OFF "sled boot off; "
-#define CFG_ADNPESC1_SLED_RED_BLINK "sled red blink; "
+#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF "sled boot off; "
+#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK "sled red blink; "
#else
-#define CFG_ADNPESC1_SLED_BOOT_OFF
-#define CFG_ADNPESC1_SLED_RED_BLINK
+#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF
+#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK
#endif
#define CONFIG_BOOTDELAY 5
@@ -163,10 +163,10 @@
"if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \
"then " \
"wd off; " \
- CFG_ADNPESC1_SLED_BOOT_OFF \
+ CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF \
"go $appl_entry_addr; " \
"else " \
- CFG_ADNPESC1_SLED_RED_BLINK \
+ CONFIG_SYS_ADNPESC1_SLED_RED_BLINK \
"echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
"echo *** invalid application at $appl_entry_addr; " \
"echo *** stop bootup...; " \
@@ -176,45 +176,45 @@
* EXTRA ENVIRONMENT
*----------------------------------------------------------------------*/
#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
-#define CFG_ADNPESC1_SLED_YELLO_ON "sled yellow on; "
-#define CFG_ADNPESC1_SLED_YELLO_OFF "sled yellow off; "
+#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON "sled yellow on; "
+#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF "sled yellow off; "
#else
-#define CFG_ADNPESC1_SLED_YELLO_ON
-#define CFG_ADNPESC1_SLED_YELLO_OFF
+#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON
+#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"update_allowed=0\0" \
- "update_load_addr=" CFG_ADNPESC1_UPDATE_LOAD_ADDR "\0" \
- "appl_entry_addr=" CFG_ADNPESC1_NIOS_APPL_ENTRY "\0" \
- "appl_end_addr=" CFG_ADNPESC1_NIOS_APPL_END "\0" \
- "appl_ident_addr=" CFG_ADNPESC1_NIOS_APPL_IDENT "\0" \
- "appl_ident_str=" CFG_ADNPESC1_NIOS_IDENTIFIER "\0" \
+ "update_load_addr=" CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "\0" \
+ "appl_entry_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "\0" \
+ "appl_end_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_END "\0" \
+ "appl_ident_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "\0" \
+ "appl_ident_str=" CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "\0" \
"appl_name=ADNPESC1/base32/linux.bin\0" \
"appl_update=" \
"if itest.b $update_allowed != 0; " \
"then " \
- CFG_ADNPESC1_SLED_YELLO_ON \
+ CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $appl_name; " \
"protect off $appl_entry_addr $appl_end_addr; " \
"era $appl_entry_addr $appl_end_addr; " \
"cp.b $update_load_addr $appl_entry_addr $filesize; "\
- CFG_ADNPESC1_SLED_YELLO_OFF \
+ CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
"else " \
"echo *** update not allowed (update_allowed=$update_allowed); "\
"fi\0" \
- "fs_base_addr=" CFG_ADNPESC1_FILESYSTEM_BASE "\0" \
- "fs_end_addr=" CFG_ADNPESC1_FILESYSTEM_END "\0" \
+ "fs_base_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "\0" \
+ "fs_end_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_END "\0" \
"fs_name=ADNPESC1/base32/romfs.img\0" \
"fs_update=" \
"if itest.b $update_allowed != 0; " \
"then " \
- CFG_ADNPESC1_SLED_YELLO_ON \
+ CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $fs_name; " \
"protect off $fs_base_addr $fs_end_addr; " \
"era $fs_base_addr $fs_end_addr; " \
"cp.b $update_load_addr $fs_base_addr $filesize; "\
- CFG_ADNPESC1_SLED_YELLO_OFF \
+ CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
"else " \
"echo *** update not allowed (update_allowed=$update_allowed); "\
"fi\0" \
@@ -222,7 +222,7 @@
"uboot_loadnrun=" \
"if ping $serverip; " \
"then " \
- CFG_ADNPESC1_SLED_YELLO_ON \
+ CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $uboot_name; " \
"wd off; " \
"go $update_load_addr; " \
@@ -234,92 +234,92 @@
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_UART_NUMS != 0)
+#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-#define CFG_NIOS_CONSOLE CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
+#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-#if (CFG_NIOS_CPU_UART0_BR != 0)
-#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE CFG_NIOS_CPU_UART0_BR
+#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
+#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
+#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
#else
-#undef CFG_NIOS_FIXEDBAUD
+#undef CONFIG_SYS_NIOS_FIXEDBAUD
#define CONFIG_BAUDRATE 115200
#endif
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#else
-#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
* so an avalon bus timer is required.
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER)
+#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
-#if (CFG_NIOS_CPU_TICK_TIMER == 0)
+#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */
-#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ
+#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
+#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
+#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
-#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
-#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
+#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
#else
-#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
-#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */
+#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
-#if (CFG_HZ <= 1000)
-#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#if (CONFIG_SYS_HZ <= 1000)
+#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
-#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
-#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
-#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
+#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
#endif
-#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
+#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
-#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
+#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
+#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
+#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
-#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
-#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
+#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
+#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
#else
-#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
-#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
+#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */
+#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
-#if (CFG_HZ <= 1000)
-#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
+#if (CONFIG_SYS_HZ <= 1000)
+#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
-#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
-#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
+#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
-#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
+#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
#endif
-#endif /* CFG_NIOS_CPU_TICK_TIMER */
+#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
#else
-#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
#endif
/*------------------------------------------------------------------------
@@ -330,53 +330,53 @@
#ifdef CONFIG_HW_WATCHDOG
/* MAX823 supervisor -- watchdog enable port at: */
-#if (CFG_NIOS_CPU_WDENA_PIO == 0)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 1)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 2)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 3)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 4)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 5)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 6)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 7)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 8)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */
-#elif (CFG_NIOS_CPU_WDENA_PIO == 9)
-#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */
+#if (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
+#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9)
+#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
#else
-#error *** CFG_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
#endif
/* MAX823 supervisor -- watchdog trigger port at: */
-#if (CFG_NIOS_CPU_WDTOG_PIO == 0)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 1)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 2)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 3)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 4)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 5)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 6)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 7)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 8)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */
-#elif (CFG_NIOS_CPU_WDTOG_PIO == 9)
-#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */
+#if (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
+#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9)
+#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
#else
-#error *** CFG_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
#endif
#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */
@@ -384,7 +384,7 @@
#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */
#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/
#else
-#error *** CFG_ERROR: missing watchdog bit configuration, expand your config.h
+#error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h
#endif
#endif /* CONFIG_HW_WATCHDOG */
@@ -392,14 +392,14 @@
/*------------------------------------------------------------------------
* SERIAL PERIPHAREL INTERFACE
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_SPI_NUMS == 1)
+#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
#define CONFIG_NIOS_SPI 1 /* SPI support active */
-#define CFG_NIOS_SPIBASE CFG_NIOS_CPU_SPI0
-#define CFG_NIOS_SPIBITS CFG_NIOS_CPU_SPI0_BITS
+#define CONFIG_SYS_NIOS_SPIBASE CONFIG_SYS_NIOS_CPU_SPI0
+#define CONFIG_SYS_NIOS_SPIBITS CONFIG_SYS_NIOS_CPU_SPI0_BITS
#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
-#define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */
+#define CONFIG_SYS_SPI_RTC_DEVID 0 /* as 1st SPI device */
#else
#undef CONFIG_NIOS_SPI /* NO SPI support */
@@ -408,29 +408,29 @@
/*------------------------------------------------------------------------
* Ethernet -- needs work!
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_LAN_NUMS == 1)
+#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
+#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
+#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#define CONFIG_SMC_USE_32_BIT 1
#else /* no */
#undef CONFIG_SMC_USE_32_BIT
#endif
-#elif (CFG_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
+#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
/********************************************/
/* !!! CS8900 is __not__ tested on NIOS !!! */
/********************************************/
#define CONFIG_DRIVER_CS8900 /* Using CS8900 */
-#define CS8900_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+#define CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
+#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#undef CS8900_BUS16
#define CS8900_BUS32 1
#else /* no */
@@ -439,7 +439,7 @@
#endif
#else
-#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
+#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
#endif
#define CONFIG_ETHADDR 02:80:ae:20:60:6f
@@ -448,80 +448,80 @@
#define CONFIG_SERVERIP 192.168.161.85
#else
-#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
+#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
#endif
/*------------------------------------------------------------------------
* STATUS LEDs
*----------------------------------------------------------------------*/
-#if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO)
+#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
-#if (CFG_NIOS_CPU_LED_PIO == 0)
+#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-#define STATUS_LED_BASE CFG_NIOS_CPU_PIO0
-#define STATUS_LED_BITS CFG_NIOS_CPU_PIO0_BITS
+#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO0
+#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO0_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-#if (CFG_NIOS_CPU_PIO0_TYPE == 1)
+#if (CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
-#elif (CFG_NIOS_CPU_LED_PIO == 1)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-#define STATUS_LED_BASE CFG_NIOS_CPU_PIO1
-#define STATUS_LED_BITS CFG_NIOS_CPU_PIO1_BITS
+#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO1
+#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO1_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-#if (CFG_NIOS_CPU_PIO1_TYPE == 1)
+#if (CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
-#elif (CFG_NIOS_CPU_LED_PIO == 2)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-#define STATUS_LED_BASE CFG_NIOS_CPU_PIO2
-#define STATUS_LED_BITS CFG_NIOS_CPU_PIO2_BITS
+#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
+#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-#if (CFG_NIOS_CPU_PIO2_TYPE == 1)
+#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
-#elif (CFG_NIOS_CPU_LED_PIO == 3)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-#elif (CFG_NIOS_CPU_LED_PIO == 4)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-#elif (CFG_NIOS_CPU_LED_PIO == 5)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-#elif (CFG_NIOS_CPU_LED_PIO == 6)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-#elif (CFG_NIOS_CPU_LED_PIO == 7)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-#elif (CFG_NIOS_CPU_LED_PIO == 8)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-#elif (CFG_NIOS_CPU_LED_PIO == 9)
+#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
#else
-#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
+#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
#endif
#define CONFIG_STATUS_LED 1 /* enable status led driver */
@@ -529,39 +529,39 @@
#define STATUS_LED_BIT (1 << 0) /* LED[0] */
#define STATUS_LED_STATE STATUS_LED_BLINKING
#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
-#define STATUS_LED_PERIOD (CFG_HZ / 2) /* ca. 1 Hz */
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_BOOT 0 /* boot LED */
#if (STATUS_LED_BITS > 1)
#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CFG_HZ / 10) /* ca. 5 Hz */
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10) /* ca. 5 Hz */
#define STATUS_LED_RED 1 /* fail LED */
#endif
#if (STATUS_LED_BITS > 2)
#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
#define STATUS_LED_STATE2 STATUS_LED_OFF
-#define STATUS_LED_PERIOD2 (CFG_HZ / 2) /* ca. 1 Hz */
+#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_YELLOW 2 /* info LED */
#endif
#if (STATUS_LED_BITS > 3)
#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
#define STATUS_LED_STATE3 STATUS_LED_OFF
-#define STATUS_LED_PERIOD3 (CFG_HZ / 2) /* ca. 1 Hz */
+#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_GREEN 3 /* info LED */
#endif
#define STATUS_LED_PAR 1 /* makes status_led.h happy */
-#endif /* CFG_NIOS_CPU_PIO_NUMS */
+#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
/*------------------------------------------------------------------------
* Diagnostics / Power On Self Tests
*----------------------------------------------------------------------*/
-#define CONFIG_POST CFG_POST_RTC
-#define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CONFIG_POST CONFIG_SYS_POST_RTC
+#define CONFIG_SYS_NIOS_POST_WORD_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
/*
* BOOTP options
@@ -595,7 +595,7 @@
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_XIMG
-#if (CFG_NIOS_CPU_SPI_NUMS == 1)
+#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
#define CONFIG_CMD_DATE
#define CONFIG_CMD_SPI
#endif
@@ -610,62 +610,62 @@
/*------------------------------------------------------------------------
* MISC
*----------------------------------------------------------------------*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_HUSH_PARSER 1 /* use "hush" command parser
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser
undef to save memory */
-#define CFG_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 64 /* max number of command args*/
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 64 /* max number of command args*/
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "[]> "
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "[]> "
#endif
/* Default load address */
-#if (CFG_SRAM_SIZE != 0)
+#if (CONFIG_SYS_SRAM_SIZE != 0)
/* default in SRAM */
-#define CFG_LOAD_ADDR CFG_SRAM_BASE
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE
-#elif (CFG_SDRAM_SIZE != 0)
+#elif (CONFIG_SYS_SDRAM_SIZE != 0)
/* default in SDRAM */
-#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
#if 1
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
#else
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x400000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000)
#endif
#else
-#define CFG_LOAD_ADDR CFG_SDRAM_BASE
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
#endif
#else
-#undef CFG_LOAD_ADDR /* force error break */
+#undef CONFIG_SYS_LOAD_ADDR /* force error break */
#endif
/* MEM test area */
-#if (CFG_SDRAM_SIZE != 0)
+#if (CONFIG_SYS_SDRAM_SIZE != 0)
/* SDRAM begin to stack area (1MB stack) */
-#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
#if 0
-#define CFG_MEMTEST_START (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
#else
-#define CFG_MEMTEST_START (CFG_SDRAM_BASE + 0x400000)
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400000)
#endif
#else
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#endif
-#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024))
-#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024))
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
#else
-#undef CFG_MEMTEST_START /* force error break */
-#undef CFG_MEMTEST_END
+#undef CONFIG_SYS_MEMTEST_START /* force error break */
+#undef CONFIG_SYS_MEMTEST_END
#endif
/*