rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 26c6fbe..fe1cc17 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -36,7 +36,7 @@
!! To make it work for the default, the TEXT_BASE define in !!
!! board/mpc8266ads/config.mk must be changed from 0xfe000000 to !!
!! 0xfff00000 !!
- !! The CFG_HRCW_MASTER define below must also be changed to match !!
+ !! The CONFIG_SYS_HRCW_MASTER define below must also be changed to match !!
!! !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
*/
@@ -115,18 +115,18 @@
* - Select bus for bd/buffers (see 28-13)
* - Half duplex
*/
-# define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE 0
-# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE 0
+# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
#endif /* CONFIG_ETHER_INDEX */
/* other options */
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
/* PCI */
#define CONFIG_PCI
@@ -218,47 +218,47 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */
/* for versions < 2.4.5-pre5 */
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#define CFG_FLASH_BASE 0xFE000000
+#define CONFIG_SYS_FLASH_BASE 0xFE000000
#define FLASH_BASE 0xFE000000
-#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
-#define CFG_FLASH_SIZE 8
-#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_SIZE 8
+#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
-#undef CFG_FLASH_CHECKSUM
+#undef CONFIG_SYS_FLASH_CHECKSUM
/* this is stuff came out of the Motorola docs */
/* Only change this if you also change the Hardware configuration Word */
-#define CFG_DEFAULT_IMMR 0x0F010000
+#define CONFIG_SYS_DEFAULT_IMMR 0x0F010000
/* Set IMMR to 0xF0000000 or above to boot Linux */
-#define CFG_IMMR 0xF0000000
-#define CFG_BCSR 0xF8000000
-#define CFG_PCI_INT 0xF8200000 /* PCI interrupt controller */
+#define CONFIG_SYS_IMMR 0xF0000000
+#define CONFIG_SYS_BCSR 0xF8000000
+#define CONFIG_SYS_PCI_INT 0xF8200000 /* PCI interrupt controller */
/* Define CONFIG_VERY_BIG_RAM to allow use of SDRAMs larger than 256MBytes
*/
@@ -267,8 +267,8 @@
/* What should be the base address of SDRAM DIMM and how big is
* it (in Mbytes)? This will normally auto-configure via the SPD.
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 16
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 16
#define SDRAM_SPD_ADDR 0x50
@@ -295,12 +295,12 @@
* - No data pipelining is done
* - Valid
*/
-#define CFG_BR2_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
BRx_PS_64 |\
BRx_MS_SDRAM_P |\
BRx_V)
-#define CFG_BR3_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
BRx_PS_64 |\
BRx_MS_SDRAM_P |\
BRx_V)
@@ -314,13 +314,13 @@
* - Back-to-back page mode
* - Internal bank interleaving within save device enabled
*/
-#if (CFG_SDRAM_SIZE == 64)
-#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM_SIZE) |\
+#if (CONFIG_SYS_SDRAM_SIZE == 64)
+#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE) |\
ORxS_BPD_4 |\
ORxS_ROWST_PBI0_A8 |\
ORxS_NUMR_12)
-#elif (CFG_SDRAM_SIZE == 16)
-#define CFG_OR2_PRELIM (0xFF000C80)
+#elif (CONFIG_SYS_SDRAM_SIZE == 16)
+#define CONFIG_SYS_OR2_PRELIM (0xFF000C80)
#else
#error "INVALID SDRAM CONFIGURATION"
#endif
@@ -331,7 +331,7 @@
*-----------------------------------------------------------------------
*/
-#if (CFG_SDRAM_SIZE == 64)
+#if (CONFIG_SYS_SDRAM_SIZE == 64)
/* With a 64 MB DIMM, the PSDMR is configured as follows:
*
* - Bank Based Interleaving,
@@ -349,7 +349,7 @@
* - earliest timing for PRECHARGE after last data was written is 1 clock,
* - CAS Latency is 2.
*/
-#define CFG_PSDMR (PSDMR_RFEN |\
+#define CONFIG_SYS_PSDMR (PSDMR_RFEN |\
PSDMR_SDAM_A14_IS_A5 |\
PSDMR_BSMA_A14_A16 |\
PSDMR_SDA10_PBI0_A9 |\
@@ -359,12 +359,12 @@
PSDMR_LDOTOPRE_1C |\
PSDMR_WRC_1C |\
PSDMR_CL_2)
-#elif (CFG_SDRAM_SIZE == 16)
+#elif (CONFIG_SYS_SDRAM_SIZE == 16)
/* With a 16 MB DIMM, the PSDMR is configured as follows:
*
* configuration parameters found in Motorola documentation
*/
-#define CFG_PSDMR (0x016EB452)
+#define CONFIG_SYS_PSDMR (0x016EB452)
#else
#error "INVALID SDRAM CONFIGURATION"
#endif
@@ -374,22 +374,22 @@
#define FETHIEN 0x08000008
#define FETH_RST 0x04000004
-#define CFG_INIT_RAM_ADDR CFG_IMMR
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2) */
/* 0x0EB2B645 */
-#define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\
+#define CONFIG_SYS_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\
( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB010 ) |\
( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\
( HRCW_CS10PC01 | HRCW_MODCK_H0101 ) \
)
/* Use this HRCW for booting from address 0xfff0000 (JP3 in setting 2-3) */
-/* #define CFG_HRCW_MASTER 0x0cb23645 */
+/* #define CONFIG_SYS_HRCW_MASTER 0x0cb23645 */
/* This value should actually be situated in the first 256 bytes of the FLASH
which on the standard MPC8266ADS board is at address 0xFF800000
@@ -406,39 +406,39 @@
*/
/* no slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CONFIG_SYS_HRCW_SLAVE1 0
+#define CONFIG_SYS_HRCW_SLAVE2 0
+#define CONFIG_SYS_HRCW_SLAVE3 0
+#define CONFIG_SYS_HRCW_SLAVE4 0
+#define CONFIG_SYS_HRCW_SLAVE5 0
+#define CONFIG_SYS_HRCW_SLAVE6 0
+#define CONFIG_SYS_HRCW_SLAVE7 0
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_MONITOR_BASE TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-# define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT
#endif
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
# define CONFIG_ENV_IS_IN_FLASH 1
-# define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
# define CONFIG_ENV_SECT_SIZE 0x40000
#else
# define CONFIG_ENV_IS_IN_NVRAM 1
-# define CONFIG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
# define CONFIG_ENV_SIZE 0x200
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
-#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
#if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
@@ -451,22 +451,22 @@
*
* HID1 has only read-only information - nothing to set.
*/
-/*#define CFG_HID0_INIT 0 */
-#define CFG_HID0_INIT (HID0_ICE |\
+/*#define CONFIG_SYS_HID0_INIT 0 */
+#define CONFIG_SYS_HID0_INIT (HID0_ICE |\
HID0_DCE |\
HID0_ICFI |\
HID0_DCI |\
HID0_IFEM |\
HID0_ABE)
-#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE )
+#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE )
-#define CFG_HID2 0
+#define CONFIG_SYS_HID2 0
-#define CFG_SYPCR 0xFFFFFFC3
-#define CFG_BCR 0x004C0000
-#define CFG_SIUMCR 0x4E64C000
-#define CFG_SCCR 0x00000000
+#define CONFIG_SYS_SYPCR 0xFFFFFFC3
+#define CONFIG_SYS_BCR 0x004C0000
+#define CONFIG_SYS_SIUMCR 0x4E64C000
+#define CONFIG_SYS_SCCR 0x00000000
/* local bus memory map
*
@@ -481,31 +481,31 @@
* 0xF8300000-0xF8307FFF 32KB EEPROM
* 0xFE000000-0xFFFFFFFF 32MB flash
*/
-#define CFG_BR0_PRELIM 0xFE001801 /* flash */
-#define CFG_OR0_PRELIM 0xFE000836
-#define CFG_BR1_PRELIM (CFG_BCSR | 0x1801) /* BCSR */
-#define CFG_OR1_PRELIM 0xFFFF8010
-#define CFG_BR4_PRELIM 0xF8300801 /* EEPROM */
-#define CFG_OR4_PRELIM 0xFFFF8846
-#define CFG_BR5_PRELIM 0xF8100801 /* PM5350 ATM UNI */
-#define CFG_OR5_PRELIM 0xFFFF8E36
-#define CFG_BR8_PRELIM (CFG_PCI_INT | 0x1801) /* PCI interrupt controller */
-#define CFG_OR8_PRELIM 0xFFFF8010
+#define CONFIG_SYS_BR0_PRELIM 0xFE001801 /* flash */
+#define CONFIG_SYS_OR0_PRELIM 0xFE000836
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x1801) /* BCSR */
+#define CONFIG_SYS_OR1_PRELIM 0xFFFF8010
+#define CONFIG_SYS_BR4_PRELIM 0xF8300801 /* EEPROM */
+#define CONFIG_SYS_OR4_PRELIM 0xFFFF8846
+#define CONFIG_SYS_BR5_PRELIM 0xF8100801 /* PM5350 ATM UNI */
+#define CONFIG_SYS_OR5_PRELIM 0xFFFF8E36
+#define CONFIG_SYS_BR8_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */
+#define CONFIG_SYS_OR8_PRELIM 0xFFFF8010
-#define CFG_RMR 0x0001
-#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CFG_RCCR 0
-#define CFG_MPTPR 0x00001900
-#define CFG_PSRT 0x00000021
+#define CONFIG_SYS_RMR 0x0001
+#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_RCCR 0
+#define CONFIG_SYS_MPTPR 0x00001900
+#define CONFIG_SYS_PSRT 0x00000021
/* This address must not exist */
-#define CFG_RESET_ADDRESS 0xFCFFFF00
+#define CONFIG_SYS_RESET_ADDRESS 0xFCFFFF00
/* PCI Memory map (if different from default map */
-#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
-#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
-#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */
+#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+#define CONFIG_SYS_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
PICMR_PREFETCH_EN)
/*
@@ -516,11 +516,11 @@
*/
/* PCIBR0 */
-#define CFG_PCI_MSTR0_LOCAL 0x80000000 /* Local base */
-#define CFG_PCIMSK0_MASK PCIMSK_1GB /* Size of window */
+#define CONFIG_SYS_PCI_MSTR0_LOCAL 0x80000000 /* Local base */
+#define CONFIG_SYS_PCIMSK0_MASK PCIMSK_1GB /* Size of window */
/* PCIBR1 */
-#define CFG_PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
-#define CFG_PCIMSK1_MASK PCIMSK_64MB /* Size of window */
+#define CONFIG_SYS_PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
+#define CONFIG_SYS_PCIMSK1_MASK PCIMSK_64MB /* Size of window */
/*
* Master window that allows the CPU to access PCI Memory (prefetch).
@@ -528,11 +528,11 @@
* in the bridge.
*/
-#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
-#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
-#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
-#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
-#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
+#define CONFIG_SYS_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
+#define CONFIG_SYS_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
+#define CONFIG_SYS_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
+#define CONFIG_SYS_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
/*
* Master window that allows the CPU to access PCI Memory (non-prefetch).
@@ -540,11 +540,11 @@
* in the bridge.
*/
-#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
-#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
-#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
-#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
-#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
+#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
+#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
+#define CONFIG_SYS_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
+#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
+#define CONFIG_SYS_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
/*
* Master window that allows the CPU to access PCI IO space.
@@ -552,11 +552,11 @@
* in the bridge.
*/
-#define CFG_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */
-#define CFG_PCI_MSTR_IO_BUS 0xF4000000 /* PCI base */
-#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
-#define CFG_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */
-#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO)
+#define CONFIG_SYS_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */
+#define CONFIG_SYS_PCI_MSTR_IO_BUS 0xF4000000 /* PCI base */
+#define CONFIG_SYS_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
+#define CONFIG_SYS_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */
+#define CONFIG_SYS_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO)
/*
* JFFS2 partitions