rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 8c1af76..77e1cc8 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -33,12 +33,12 @@
DECLARE_GLOBAL_DATA_PTR;
-#if ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CFG_MONITOR_BASE) || \
- (CONFIG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
+#if ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+ (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
defined(CONFIG_ENV_IS_IN_NVRAM)
-#define TOTAL_MALLOC_LEN (CFG_MALLOC_LEN + CONFIG_ENV_SIZE)
+#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
#else
-#define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
#undef DEBUG
@@ -75,7 +75,7 @@
*/
static void mem_malloc_init (void)
{
- ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
+ ulong dest_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
mem_malloc_end = dest_addr;
mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
@@ -123,7 +123,7 @@
return (0);
}
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
static void display_flash_config(ulong size)
{
puts ("Flash: ");
@@ -187,7 +187,7 @@
gd_t gd_data, *id;
bd_t *bd;
init_fnc_t **init_fnc_ptr;
- ulong addr, addr_sp, len = (ulong)&uboot_end - CFG_MONITOR_BASE;
+ ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE;
ulong *s;
#ifdef CONFIG_PURPLE
void copy_code (ulong);
@@ -211,7 +211,7 @@
* Now that we have DRAM mapped and working, we can
* relocate the code and continue running from DRAM.
*/
- addr = CFG_SDRAM_BASE + gd->ram_size;
+ addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
/* We can reserve some RAM "on top" here.
*/
@@ -252,10 +252,10 @@
/* Reserve memory for boot params.
*/
- addr_sp -= CFG_BOOTPARAMS_LEN;
+ addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
bd->bi_boot_params = addr_sp;
debug ("Reserving %dk for boot params() at: %08lx\n",
- CFG_BOOTPARAMS_LEN >> 10, addr_sp);
+ CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
/*
* Finally, we set up a new (bigger) stack.
@@ -274,7 +274,7 @@
/*
* Save local variables to board info struct
*/
- bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
+ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
@@ -304,7 +304,7 @@
void board_init_r (gd_t *id, ulong dest_addr)
{
cmd_tbl_t *cmdtp;
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
ulong size;
#endif
extern void malloc_bin_reloc (void);
@@ -320,7 +320,7 @@
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
- gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+ gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
@@ -345,7 +345,7 @@
addr = (ulong)(cmdtp->usage) + gd->reloc_off;
cmdtp->usage = (char *)addr;
}
-#ifdef CFG_LONGHELP
+#ifdef CONFIG_SYS_LONGHELP
if (cmdtp->help) {
addr = (ulong)(cmdtp->help) + gd->reloc_off;
cmdtp->help = (char *)addr;
@@ -359,15 +359,15 @@
bd = gd->bd;
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
size = flash_init();
display_flash_config (size);
bd->bi_flashsize = size;
#endif
- bd->bi_flashstart = CFG_FLASH_BASE;
-#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */
#else
bd->bi_flashoffset = 0;