Merge 'u-boot-microblaze/zynq' into (u-boot-arm/master'
Conflicts:
arch/arm/include/asm/arch-zynq/hardware.h
The conflict above was trivial and solved during merge.
diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile
index e5494f7..de6b081 100644
--- a/arch/arm/cpu/armv7/zynq/Makefile
+++ b/arch/arm/cpu/armv7/zynq/Makefile
@@ -14,6 +14,7 @@
COBJS-y := timer.o
COBJS-y += cpu.o
+COBJS-y += ddrc.o
COBJS-y += slcr.o
COBJS := $(COBJS-y)
diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c
new file mode 100644
index 0000000..ba6a6ae
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/ddrc.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012 - 2013 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012 - 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Control regsiter bitfield definitions */
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK 0xC
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT 2
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT 1
+
+/* ECC scrub regsiter definitions */
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK 0x7
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED 0x4
+
+void zynq_ddrc_init(void)
+{
+ u32 width, ecctype;
+
+ width = readl(&ddrc_base->ddrc_ctrl);
+ width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >>
+ ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT;
+ ecctype = (readl(&ddrc_base->ecc_scrub) &
+ ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK);
+
+ /* ECC is enabled when memory is in 16bit mode and it is enabled */
+ if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED) &&
+ (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)) {
+ puts("Memory: ECC enabled\n");
+ /*
+ * Clear the first 1MB because it is not initialized from
+ * first stage bootloader. To get ECC to work all memory has
+ * been initialized by writing any value.
+ */
+ memset(0, 0, 1 * 1024 * 1024);
+ } else {
+ puts("Memory: ECC disabled\n");
+ }
+
+ if (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)
+ gd->ram_size /= 2;
+}
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index e5fe992..717ec65 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -70,7 +70,7 @@
/* Configure GEM_RCLK_CTRL */
writel(rclk, &slcr_base->gem0_rclk_ctrl);
}
-
+ udelay(100000);
out:
zynq_slcr_lock();
}
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index 081624e..cd69677 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -19,6 +19,7 @@
#define ZYNQ_I2C_BASEADDR1 0xE0005000
#define ZYNQ_SPI_BASEADDR0 0xE0006000
#define ZYNQ_SPI_BASEADDR1 0xE0007000
+#define ZYNQ_DDRC_BASEADDR 0xF8006000
/* Reflect slcr offsets */
struct slcr_regs {
@@ -86,4 +87,11 @@
#define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR)
+struct ddrc_regs {
+ u32 ddrc_ctrl; /* 0x0 */
+ u32 reserved[60];
+ u32 ecc_scrub; /* 0xF4 */
+};
+#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR)
+
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index 19a4eec..110de90 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -14,6 +14,7 @@
extern void zynq_slcr_devcfg_disable(void);
extern void zynq_slcr_devcfg_enable(void);
extern u32 zynq_slcr_get_idcode(void);
+extern void zynq_ddrc_init(void);
/* Driver extern functions */
extern int zynq_sdhci_init(u32 regbase);
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index c173f0c..f7f1c59 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -65,6 +65,23 @@
{
u32 ret = 0;
+#ifdef CONFIG_XILINX_AXIEMAC
+ ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
+ XILINX_AXIDMA_BASEADDR);
+#endif
+#ifdef CONFIG_XILINX_EMACLITE
+ u32 txpp = 0;
+ u32 rxpp = 0;
+# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+ txpp = 1;
+# endif
+# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+ rxpp = 1;
+# endif
+ ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
+ txpp, rxpp);
+#endif
+
#if defined(CONFIG_ZYNQ_GEM)
# if defined(CONFIG_ZYNQ_GEM0)
ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
@@ -100,5 +117,7 @@
{
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ zynq_ddrc_init();
+
return 0;
}