ARM: zynq: Add support for zc770-xm011
Add xm011 DTS file and related configs and configurations.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8ebd693..06fbd8b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -45,6 +45,7 @@
zynq-microzed.dtb \
zynq-picozed.dtb \
zynq-zc770-xm010.dtb \
+ zynq-zc770-xm011.dtb \
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
new file mode 100644
index 0000000..d38c820
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -0,0 +1,65 @@
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+/ {
+ compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+ model = "Xilinx Zynq";
+
+ aliases {
+ i2c0 = &i2c1;
+ serial0 = &uart1;
+ spi0 = &spi0;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
+ linux,stdout-path = &uart1;
+ stdout-path = &uart1;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ usb_phy1: phy1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
+&can0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ m24c02_eeprom@52 {
+ compatible = "at,24c02";
+ reg = <0x52>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy1>;
+};
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
new file mode 100644
index 0000000..8f9221d
--- /dev/null
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -0,0 +1,13 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ZYNQ=y
+CONFIG_TARGET_ZYNQ_ZC770=y
+CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011"
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
index 16b9047..7a1b872 100644
--- a/include/configs/zynq_zc770.h
+++ b/include/configs/zynq_zc770.h
@@ -21,6 +21,9 @@
# define CONFIG_ZYNQ_SDHCI0
# define CONFIG_ZYNQ_SPI
+#elif defined(CONFIG_ZC770_XM011)
+# define CONFIG_ZYNQ_SERIAL_UART1
+
#elif defined(CONFIG_ZC770_XM012)
# define CONFIG_ZYNQ_SERIAL_UART1
# undef CONFIG_SYS_NO_FLASH