Kconfig: Replace spaces with tabs and missing newline
Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig
entry should be separated by newline.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8d0cb52..f9d3f79 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -169,7 +169,7 @@
bool
config ARM_ERRATA_845369
- bool
+ bool
config ARM_ERRATA_852421
bool
@@ -683,7 +683,7 @@
select CPU_ARM1136
config ARCH_MX7ULP
- bool "NXP MX7ULP"
+ bool "NXP MX7ULP"
select CPU_V7A
select ROM_UNIFIED_SECTIONS
imply MXC_GPIO
@@ -709,7 +709,7 @@
if ARCH_MX6
config SPL_LDSCRIPT
- default "arch/arm/mach-omap2/u-boot-spl.lds"
+ default "arch/arm/mach-omap2/u-boot-spl.lds"
endif
config ARCH_MX5
@@ -1488,8 +1488,8 @@
endmenu
config SPL_LDSCRIPT
- default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
- default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+ default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
+ default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index d4bc60a..8bd4d68 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -301,11 +301,11 @@
select SUPPORT_SPL
config TARGET_MX6SLLEVK
- bool "mx6sll evk"
+ bool "mx6sll evk"
select BOARD_LATE_INIT
- select MX6SLL
- select DM
- select DM_THERMAL
+ select MX6SLL
+ select DM
+ select DM_THERMAL
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
@@ -317,11 +317,11 @@
select BOARD_EARLY_INIT_F
config TARGET_MX6SXSABREAUTO
- bool "mx6sxsabreauto"
+ bool "mx6sxsabreauto"
select BOARD_LATE_INIT
select MX6SX
- select DM
- select DM_THERMAL
+ select DM
+ select DM_THERMAL
select BOARD_EARLY_INIT_F
config TARGET_MX6UL_9X9_EVK
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 0cf530d..ff89065 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1012,11 +1012,12 @@
help
Enables the command "sdp" which is used to have U-Boot emulating the
Serial Download Protocol (SDP) via USB.
+
config CMD_ROCKUSB
bool "rockusb"
depends on USB_FUNCTION_ROCKUSB
help
- Rockusb protocol is widely used by Rockchip SoC based devices. It can
+ Rockusb protocol is widely used by Rockchip SoC based devices. It can
read/write info, image to/from devices. This enable rockusb command
support to communication with rockusb device. for more detail about
this command, please read doc/README.rockusb.
@@ -1489,7 +1490,7 @@
the original data.
Sub-commands:
- blob enc - encapsulating data as a cryptgraphic blob
+ blob enc - encapsulating data as a cryptgraphic blob
blob dec - decapsulating cryptgraphic blob to get the data
Syntax: