global: Finish CONFIG -> CFG migration
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks. Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index 07a59ec..ecb6ba8 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -45,8 +45,8 @@
#define GSERIAL_RX_ENDPOINT 1
#define NUM_ACM_INTERFACES 2
#define NUM_GSERIAL_INTERFACES 1
-#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface"
-#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface"
+#define CFG_USBD_DATA_INTERFACE_STR "Bulk Data Interface"
+#define CFG_USBD_CTRL_INTERFACE_STR "Control Interface"
/*
* Buffers to hold input and output data
@@ -97,9 +97,9 @@
static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)];
static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)];
static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)];
-static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)];
-static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
-static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
+static u8 wstrConfiguration[2 + 2*(sizeof(CFG_USBD_CONFIGURATION_STR)-1)];
+static u8 wstrDataInterface[2 + 2*(sizeof(CFG_USBD_DATA_INTERFACE_STR)-1)];
+static u8 wstrCtrlInterface[2 + 2*(sizeof(CFG_USBD_DATA_INTERFACE_STR)-1)];
/* Standard USB Data Structures */
static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES];
@@ -206,7 +206,7 @@
.bEndpointAddress = UDC_INT_ENDPOINT | USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize
- = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+ = cpu_to_le16(CFG_USBD_SERIAL_INT_PKTSIZE),
.bInterval = 0xFF,
},
@@ -233,7 +233,7 @@
.bmAttributes =
USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+ cpu_to_le16(CFG_USBD_SERIAL_BULK_PKTSIZE),
.bInterval = 0xFF,
},
{
@@ -244,7 +244,7 @@
.bmAttributes =
USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+ cpu_to_le16(CFG_USBD_SERIAL_BULK_PKTSIZE),
.bInterval = 0xFF,
},
},
@@ -312,7 +312,7 @@
.bEndpointAddress = UDC_OUT_ENDPOINT | USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE),
+ cpu_to_le16(CFG_USBD_SERIAL_OUT_PKTSIZE),
.bInterval= 0xFF,
},
{
@@ -322,7 +322,7 @@
.bEndpointAddress = UDC_IN_ENDPOINT | USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
+ cpu_to_le16(CFG_USBD_SERIAL_IN_PKTSIZE),
.bInterval = 0xFF,
},
{
@@ -332,7 +332,7 @@
.bEndpointAddress = UDC_INT_ENDPOINT | USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+ cpu_to_le16(CFG_USBD_SERIAL_INT_PKTSIZE),
.bInterval = 0xFF,
},
},
@@ -594,20 +594,20 @@
string = (struct usb_string_descriptor *) wstrConfiguration;
string->bLength = sizeof(wstrConfiguration);
string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData);
+ str2wide (CFG_USBD_CONFIGURATION_STR, string->wData);
usbtty_string_table[STR_CONFIG]=string;
string = (struct usb_string_descriptor *) wstrDataInterface;
string->bLength = sizeof(wstrDataInterface);
string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData);
+ str2wide (CFG_USBD_DATA_INTERFACE_STR, string->wData);
usbtty_string_table[STR_DATA_INTERFACE]=string;
string = (struct usb_string_descriptor *) wstrCtrlInterface;
string->bLength = sizeof(wstrCtrlInterface);
string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData);
+ str2wide (CFG_USBD_CTRL_INTERFACE_STR, string->wData);
usbtty_string_table[STR_CTRL_INTERFACE]=string;
/* Now, initialize the string table for ep0 handling */