binman: Support updating all device tree files
Binman currently supports updating the main device tree with things like
the position of each entry. Extend this support to SPL and TPL as well,
since they may need (a subset of) this information.
Also adjust DTB output files to have a .out extension since this seems
clearer than having a .dtb extension with 'out' in the name somwhere.
Also add a few missing comments and update the DT setup code to use
ReadFile and WriteFile().
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 75e9a21..6bfef7b 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -225,8 +225,26 @@
TestFunctional._MakeInputFile(outfile, data)
return data
+ def _GetDtbContentsForSplTpl(self, dtb_data, name):
+ """Create a version of the main DTB for SPL or SPL
+
+ For testing we don't actually have different versions of the DTB. With
+ U-Boot we normally run fdtgrep to remove unwanted nodes, but for tests
+ we don't normally have any unwanted nodes.
+
+ We still want the DTBs for SPL and TPL to be different though, since
+ otherwise it is confusing to know which one we are looking at. So add
+ an 'spl' or 'tpl' property to the top-level node.
+ """
+ dtb = fdt.Fdt.FromData(dtb_data)
+ dtb.Scan()
+ dtb.GetNode('/binman').AddZeroProp(name)
+ dtb.Sync(auto_resize=True)
+ dtb.Pack()
+ return dtb.GetContents()
+
def _DoReadFileDtb(self, fname, use_real_dtb=False, map=False,
- update_dtb=False, entry_args=None):
+ update_dtb=False, entry_args=None, reset_dtbs=True):
"""Run binman and return the resulting image
This runs binman with a given test file and then reads the resulting
@@ -256,12 +274,21 @@
# Use the compiled test file as the u-boot-dtb input
if use_real_dtb:
dtb_data = self._SetupDtb(fname)
+ infile = os.path.join(self._indir, 'u-boot.dtb')
+
+ # For testing purposes, make a copy of the DT for SPL and TPL. Add
+ # a node indicating which it is, so aid verification.
+ for name in ['spl', 'tpl']:
+ dtb_fname = '%s/u-boot-%s.dtb' % (name, name)
+ outfile = os.path.join(self._indir, dtb_fname)
+ TestFunctional._MakeInputFile(dtb_fname,
+ self._GetDtbContentsForSplTpl(dtb_data, name))
try:
retcode = self._DoTestFile(fname, map=map, update_dtb=update_dtb,
- entry_args=entry_args)
+ entry_args=entry_args, use_real_dtb=use_real_dtb)
self.assertEqual(0, retcode)
- out_dtb_fname = state.GetFdtPath('u-boot.dtb')
+ out_dtb_fname = tools.GetOutputFilename('u-boot.dtb.out')
# Find the (only) image, read it and return its contents
image = control.images['image']
@@ -277,7 +304,7 @@
return fd.read(), dtb_data, map_data, out_dtb_fname
finally:
# Put the test file back
- if use_real_dtb:
+ if reset_dtbs and use_real_dtb:
self._ResetDtbs()
def _DoReadFile(self, fname, use_real_dtb=False):
@@ -1404,6 +1431,80 @@
self.assertFalse(os.path.exists(tools.GetOutputFilename('image1.bin')))
self.assertTrue(os.path.exists(tools.GetOutputFilename('image2.bin')))
+ def testUpdateFdtAll(self):
+ """Test that all device trees are updated with offset/size info"""
+ data, _, _, _ = self._DoReadFileDtb('82_fdt_update_all.dts',
+ use_real_dtb=True, update_dtb=True)
+
+ base_expected = {
+ 'section:image-pos': 0,
+ 'u-boot-tpl-dtb:size': 513,
+ 'u-boot-spl-dtb:size': 513,
+ 'u-boot-spl-dtb:offset': 493,
+ 'image-pos': 0,
+ 'section/u-boot-dtb:image-pos': 0,
+ 'u-boot-spl-dtb:image-pos': 493,
+ 'section/u-boot-dtb:size': 493,
+ 'u-boot-tpl-dtb:image-pos': 1006,
+ 'section/u-boot-dtb:offset': 0,
+ 'section:size': 493,
+ 'offset': 0,
+ 'section:offset': 0,
+ 'u-boot-tpl-dtb:offset': 1006,
+ 'size': 1519
+ }
+
+ # We expect three device-tree files in the output, one after the other.
+ # Read them in sequence. We look for an 'spl' property in the SPL tree,
+ # and 'tpl' in the TPL tree, to make sure they are distinct from the
+ # main U-Boot tree. All three should have the same postions and offset.
+ start = 0
+ for item in ['', 'spl', 'tpl']:
+ dtb = fdt.Fdt.FromData(data[start:])
+ dtb.Scan()
+ props = self._GetPropTree(dtb, ['offset', 'size', 'image-pos',
+ 'spl', 'tpl'])
+ expected = dict(base_expected)
+ if item:
+ expected[item] = 0
+ self.assertEqual(expected, props)
+ start += dtb._fdt_obj.totalsize()
+
+ def testUpdateFdtOutput(self):
+ """Test that output DTB files are updated"""
+ try:
+ data, dtb_data, _, _ = self._DoReadFileDtb('82_fdt_update_all.dts',
+ use_real_dtb=True, update_dtb=True, reset_dtbs=False)
+
+ # Unfortunately, compiling a source file always results in a file
+ # called source.dtb (see fdt_util.EnsureCompiled()). The test
+ # source file (e.g. test/75_fdt_update_all.dts) thus does not enter
+ # binman as a file called u-boot.dtb. To fix this, copy the file
+ # over to the expected place.
+ #tools.WriteFile(os.path.join(self._indir, 'u-boot.dtb'),
+ #tools.ReadFile(tools.GetOutputFilename('source.dtb')))
+ start = 0
+ for fname in ['u-boot.dtb.out', 'spl/u-boot-spl.dtb.out',
+ 'tpl/u-boot-tpl.dtb.out']:
+ dtb = fdt.Fdt.FromData(data[start:])
+ size = dtb._fdt_obj.totalsize()
+ pathname = tools.GetOutputFilename(os.path.split(fname)[1])
+ outdata = tools.ReadFile(pathname)
+ name = os.path.split(fname)[0]
+
+ if name:
+ orig_indata = self._GetDtbContentsForSplTpl(dtb_data, name)
+ else:
+ orig_indata = dtb_data
+ self.assertNotEqual(outdata, orig_indata,
+ "Expected output file '%s' be updated" % pathname)
+ self.assertEqual(outdata, data[start:start + size],
+ "Expected output file '%s' to match output image" %
+ pathname)
+ start += size
+ finally:
+ self._ResetDtbs()
+
if __name__ == "__main__":
unittest.main()