ARM: dts: zynq: Update dts for Z-turn board
Delete devices implemented in PL, stylistic changes.
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/zynq-zturn-myir.dts b/arch/arm/dts/zynq-zturn-myir.dts
index a5ecfcc..8aa384b 100644
--- a/arch/arm/dts/zynq-zturn-myir.dts
+++ b/arch/arm/dts/zynq-zturn-myir.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
* Copyright (C) 2017 Alexander Graf <agraf@suse.de>
@@ -6,31 +7,23 @@
* Copyright (C) 2011 - 2014 Xilinx
* Copyright (C) 2012 National Instruments Corp.
*
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
+
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
model = "Zynq Z-Turn MYIR Board";
- compatible = "xlnx,zynq-7000";
+ compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
serial0 = &uart1;
serial1 = &uart0;
- spi0 = &qspi;
mmc0 = &sdhci0;
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x40000000>;
};
@@ -41,52 +34,23 @@
gpio-leds {
compatible = "gpio-leds";
- led_r {
- label = "led_r";
- gpios = <&gpio0 0x72 0x1>;
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- led_g {
- label = "led_g";
- gpios = <&gpio0 0x73 0x1>;
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- led_b {
- label = "led_b";
- gpios = <&gpio0 0x74 0x1>;
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- usr_led1 {
- label = "usr_led1";
+ usr-led1 {
+ label = "usr-led1";
gpios = <&gpio0 0x0 0x1>;
default-state = "off";
- linux,default-trigger = "none";
};
- usr_led2 {
- label = "usr_led2";
+ usr-led2 {
+ label = "usr-led2";
gpios = <&gpio0 0x9 0x1>;
default-state = "off";
- linux,default-trigger = "none";
};
};
- gpio-beep {
- compatible = "gpio-beeper";
- label = "pl-beep";
- gpios = <&gpio0 0x75 0x0>;
- };
-
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <0x1>;
- #size-cells = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
autorepeat;
K1 {
label = "K1";
@@ -100,7 +64,6 @@
&clkc {
ps-clk-frequency = <33333333>;
- fclk-enable = <0xf>;
};
&qspi {
@@ -152,8 +115,8 @@
reg = <0x49>;
};
- adxl345@53 {
- compatible = "adi,adxl34x", "adxl34x";
+ accelerometer@53 {
+ compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
reg = <0x53>;
interrupt-parent = <&intc>;
interrupts = <0x0 0x1e 0x4>;