arm: qemu: fix failure in flash initialization if booting from TF-A
If U-Boot is loaded and started from TF-A (you need to change
SYS_TEXT_BASE to 0x60000000), it will hang up at flash initialization.
If secure mode is off (default, or -machine virt,secure=off) at qemu,
it will provide dtb with two flash memory banks:
flash@0 {
bank-width = <0x4>;
reg = <0x0 0x0 0x0 0x4000000 0x0 0x4000000 0x0 0x4000000>;
compatible = "cfi-flash";
};
If secure mode is on, on the other hand, qemu provides dtb with 1 bank:
flash@0 {
bank-width = <0x4>;
reg = <0x0 0x4000000 0x0 0x4000000>;
compatible = "cfi-flash";
};
As a result, flash_init()/flash_get_size() will eventually fail.
With this patch applied, relevant CONFIG values are modified.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
index 65fdb1e..35e3c5a 100644
--- a/include/configs/qemu-arm.h
+++ b/include/configs/qemu-arm.h
@@ -46,8 +46,13 @@
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_FLASH_BASE 0x4000000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#else
#define CONFIG_SYS_FLASH_BASE 0x0
#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#endif
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* Sector: 256K, Bank: 64M */
#endif /* __CONFIG_H */