clk: stm32f7: add clock driver for stm32f7 family
add basic clock driver support for stm32f7 to enable clocks required by
the peripherals.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 40df3cd..01a8cd6 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -18,5 +18,5 @@
obj-$(CONFIG_CLK_EXYNOS) += exynos/
obj-$(CONFIG_CLK_AT91) += at91/
obj-$(CONFIG_CLK_BOSTON) += clk_boston.o
-
obj-$(CONFIG_ARCH_ASPEED) += aspeed/
+obj-$(CONFIG_STM32F7) += clk_stm32f7.o
diff --git a/drivers/clk/clk_stm32f7.c b/drivers/clk/clk_stm32f7.c
new file mode 100644
index 0000000..4c5388a
--- /dev/null
+++ b/drivers/clk/clk_stm32f7.c
@@ -0,0 +1,332 @@
+/*
+ * (C) Copyright 2017
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/rcc.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/stm32_periph.h>
+
+#define RCC_CR_HSION BIT(0)
+#define RCC_CR_HSEON BIT(16)
+#define RCC_CR_HSERDY BIT(17)
+#define RCC_CR_HSEBYP BIT(18)
+#define RCC_CR_CSSON BIT(19)
+#define RCC_CR_PLLON BIT(24)
+#define RCC_CR_PLLRDY BIT(25)
+
+#define RCC_PLLCFGR_PLLM_MASK GENMASK(5, 0)
+#define RCC_PLLCFGR_PLLN_MASK GENMASK(14, 6)
+#define RCC_PLLCFGR_PLLP_MASK GENMASK(17, 16)
+#define RCC_PLLCFGR_PLLQ_MASK GENMASK(27, 24)
+#define RCC_PLLCFGR_PLLSRC BIT(22)
+#define RCC_PLLCFGR_PLLM_SHIFT 0
+#define RCC_PLLCFGR_PLLN_SHIFT 6
+#define RCC_PLLCFGR_PLLP_SHIFT 16
+#define RCC_PLLCFGR_PLLQ_SHIFT 24
+
+#define RCC_CFGR_AHB_PSC_MASK GENMASK(7, 4)
+#define RCC_CFGR_APB1_PSC_MASK GENMASK(12, 10)
+#define RCC_CFGR_APB2_PSC_MASK GENMASK(15, 13)
+#define RCC_CFGR_SW0 BIT(0)
+#define RCC_CFGR_SW1 BIT(1)
+#define RCC_CFGR_SW_MASK GENMASK(1, 0)
+#define RCC_CFGR_SW_HSI 0
+#define RCC_CFGR_SW_HSE RCC_CFGR_SW0
+#define RCC_CFGR_SW_PLL RCC_CFGR_SW1
+#define RCC_CFGR_SWS0 BIT(2)
+#define RCC_CFGR_SWS1 BIT(3)
+#define RCC_CFGR_SWS_MASK GENMASK(3, 2)
+#define RCC_CFGR_SWS_HSI 0
+#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0
+#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1
+#define RCC_CFGR_HPRE_SHIFT 4
+#define RCC_CFGR_PPRE1_SHIFT 10
+#define RCC_CFGR_PPRE2_SHIFT 13
+
+/*
+ * Offsets of some PWR registers
+ */
+#define PWR_CR1_ODEN BIT(16)
+#define PWR_CR1_ODSWEN BIT(17)
+#define PWR_CSR1_ODRDY BIT(16)
+#define PWR_CSR1_ODSWRDY BIT(17)
+
+struct pll_psc {
+ u8 pll_m;
+ u16 pll_n;
+ u8 pll_p;
+ u8 pll_q;
+ u8 ahb_psc;
+ u8 apb1_psc;
+ u8 apb2_psc;
+};
+
+#define AHB_PSC_1 0
+#define AHB_PSC_2 0x8
+#define AHB_PSC_4 0x9
+#define AHB_PSC_8 0xA
+#define AHB_PSC_16 0xB
+#define AHB_PSC_64 0xC
+#define AHB_PSC_128 0xD
+#define AHB_PSC_256 0xE
+#define AHB_PSC_512 0xF
+
+#define APB_PSC_1 0
+#define APB_PSC_2 0x4
+#define APB_PSC_4 0x5
+#define APB_PSC_8 0x6
+#define APB_PSC_16 0x7
+
+#if !defined(CONFIG_STM32_HSE_HZ)
+#error "CONFIG_STM32_HSE_HZ not defined!"
+#else
+#if (CONFIG_STM32_HSE_HZ == 25000000)
+#if (CONFIG_SYS_CLK_FREQ == 200000000)
+/* 200 MHz */
+struct pll_psc sys_pll_psc = {
+ .pll_m = 25,
+ .pll_n = 400,
+ .pll_p = 2,
+ .pll_q = 8,
+ .ahb_psc = AHB_PSC_1,
+ .apb1_psc = APB_PSC_4,
+ .apb2_psc = APB_PSC_2
+};
+#endif
+#else
+#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
+#endif
+#endif
+
+int configure_clocks(void)
+{
+ /* Reset RCC configuration */
+ setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
+ writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
+ clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
+ | RCC_CR_PLLON));
+ writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */
+ clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
+ writel(0, &STM32_RCC->cir); /* Disable all interrupts */
+
+ /* Configure for HSE+PLL operation */
+ setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
+ while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
+ ;
+
+ setbits_le32(&STM32_RCC->cfgr, ((
+ sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
+ | (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
+ | (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
+
+ /* Configure the main PLL */
+ uint32_t pllcfgr = 0;
+ pllcfgr = RCC_PLLCFGR_PLLSRC; /* pll source HSE */
+ pllcfgr |= sys_pll_psc.pll_m << RCC_PLLCFGR_PLLM_SHIFT;
+ pllcfgr |= sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT;
+ pllcfgr |= ((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT;
+ pllcfgr |= sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT;
+ writel(pllcfgr, &STM32_RCC->pllcfgr);
+
+ /* Enable the main PLL */
+ setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
+ while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
+ ;
+
+ /* Enable high performance mode, System frequency up to 200 MHz */
+ setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
+ setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODEN);
+ /* Infinite wait! */
+ while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODRDY))
+ ;
+ /* Enable the Over-drive switch */
+ setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODSWEN);
+ /* Infinite wait! */
+ while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODSWRDY))
+ ;
+
+ stm32_flash_latency_cfg(5);
+ clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
+ setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
+
+ while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
+ RCC_CFGR_SWS_PLL)
+ ;
+
+ return 0;
+}
+
+unsigned long clock_get(enum clock clck)
+{
+ u32 sysclk = 0;
+ u32 shift = 0;
+ /* Prescaler table lookups for clock computation */
+ u8 ahb_psc_table[16] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
+ };
+ u8 apb_psc_table[8] = {
+ 0, 0, 0, 0, 1, 2, 3, 4
+ };
+
+ if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
+ RCC_CFGR_SWS_PLL) {
+ u16 pllm, plln, pllp;
+ pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
+ plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
+ >> RCC_PLLCFGR_PLLN_SHIFT);
+ pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
+ >> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1);
+ sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp;
+ }
+
+ switch (clck) {
+ case CLOCK_CORE:
+ return sysclk;
+ break;
+ case CLOCK_AHB:
+ shift = ahb_psc_table[(
+ (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
+ >> RCC_CFGR_HPRE_SHIFT)];
+ return sysclk >>= shift;
+ break;
+ case CLOCK_APB1:
+ shift = apb_psc_table[(
+ (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
+ >> RCC_CFGR_PPRE1_SHIFT)];
+ return sysclk >>= shift;
+ break;
+ case CLOCK_APB2:
+ shift = apb_psc_table[(
+ (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
+ >> RCC_CFGR_PPRE2_SHIFT)];
+ return sysclk >>= shift;
+ break;
+ default:
+ return 0;
+ break;
+ }
+}
+
+static int stm32_clk_enable(struct clk *clk)
+{
+ u32 offset = clk->id / 32;
+ u32 bit_index = clk->id % 32;
+
+ debug("%s: clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n",
+ __func__, clk->id, offset, bit_index);
+ setbits_le32(&STM32_RCC->ahb1enr + offset, BIT(bit_index));
+
+ return 0;
+}
+
+void clock_setup(int peripheral)
+{
+ switch (peripheral) {
+ case USART1_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->apb2enr, RCC_APB2ENR_USART1EN);
+ break;
+ case GPIO_A_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_A_EN);
+ break;
+ case GPIO_B_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_B_EN);
+ break;
+ case GPIO_C_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_C_EN);
+ break;
+ case GPIO_D_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_D_EN);
+ break;
+ case GPIO_E_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_E_EN);
+ break;
+ case GPIO_F_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_F_EN);
+ break;
+ case GPIO_G_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_G_EN);
+ break;
+ case GPIO_H_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_H_EN);
+ break;
+ case GPIO_I_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_I_EN);
+ break;
+ case GPIO_J_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_J_EN);
+ break;
+ case GPIO_K_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_K_EN);
+ break;
+ case SYSCFG_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->apb2enr, RCC_APB2ENR_SYSCFGEN);
+ break;
+ case TIMER2_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN);
+ break;
+ case FMC_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb3enr, RCC_AHB3ENR_FMC_EN);
+ break;
+ case STMMAC_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_EN);
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_RX_EN);
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_TX_EN);
+ break;
+ case QSPI_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb3enr, RCC_AHB3ENR_QSPI_EN);
+ break;
+ default:
+ break;
+ }
+}
+
+static int stm32_clk_probe(struct udevice *dev)
+{
+ debug("%s: stm32_clk_probe\n", __func__);
+ configure_clocks();
+
+ return 0;
+}
+
+static int stm32_clk_of_xlate(struct clk *clk,
+ struct fdtdec_phandle_args *args)
+{
+ debug("%s(clk=%p)\n", __func__, clk);
+
+ if (args->args_count != 2) {
+ debug("Invaild args_count: %d\n", args->args_count);
+ return -EINVAL;
+ }
+
+ if (args->args_count)
+ clk->id = args->args[1];
+ else
+ clk->id = 0;
+
+ return 0;
+}
+
+static struct clk_ops stm32_clk_ops = {
+ .of_xlate = stm32_clk_of_xlate,
+ .enable = stm32_clk_enable,
+};
+
+static const struct udevice_id stm32_clk_ids[] = {
+ { .compatible = "st,stm32f42xx-rcc"},
+ {}
+};
+
+U_BOOT_DRIVER(stm32f7_clk) = {
+ .name = "stm32f7_clk",
+ .id = UCLASS_CLK,
+ .of_match = stm32_clk_ids,
+ .ops = &stm32_clk_ops,
+ .probe = stm32_clk_probe,
+ .flags = DM_FLAG_PRE_RELOC,
+};