* Add support for SK98xx driver
* Add PCI support for SL8245 board
* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
to allow for more accurate baudrate settings
(error now 0.7% at 115 kbps, instead of 3.5% before)
* Patch by Andreas Mohr, 4 Sep 2003:
Fix a lot of spelling errors
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index f75e675..965ca6b 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -171,6 +171,16 @@
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
+void flash_afterinit(ulong size)
+{
+ if (size == 0x800000) { /* adjust mapping */
+ *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
+ START_REG(CFG_BOOTCS_START | size);
+ *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
+ STOP_REG(CFG_BOOTCS_START | size, size);
+ }
+}
+
#ifdef CONFIG_PCI
static struct pci_controller hose;