* Add support for SK98xx driver
* Add PCI support for SL8245 board
* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
to allow for more accurate baudrate settings
(error now 0.7% at 115 kbps, instead of 3.5% before)
* Patch by Andreas Mohr, 4 Sep 2003:
Fix a lot of spelling errors
diff --git a/drivers/sk98lin/u-boot_compat.h b/drivers/sk98lin/u-boot_compat.h
new file mode 100644
index 0000000..1e385f8
--- /dev/null
+++ b/drivers/sk98lin/u-boot_compat.h
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _UBOOT_COMPAT_H__
+#define _UBOOT_COMPAT_H__
+
+
+#include <pci.h>
+#include <pci_ids.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+
+#define __initdata
+#define __init
+#define __exit
+
+#define netif_stop_queue(x)
+#define netif_wake_queue(x)
+#define netif_running(x) 0
+#define unregister_netdev(x)
+#define remove_proc_entry(x,y)
+
+#define dev_addr enetaddr
+
+#define spin_lock_irqsave(x,y) y = 0;
+#define spin_lock_init(x)
+#define spin_lock(x)
+#define spin_unlock_irqrestore(x,y)
+#define spin_unlock(x)
+
+
+#define ENODEV 1
+#define EAGAIN 2
+#define EBUSY 3
+
+#define HZ CFG_HZ
+
+
+#define printk printf
+#define KERN_ERR
+#define KERN_WARNING
+#define KERN_INFO
+
+#define MOD_INC_USE_COUNT
+#define MOD_DEC_USE_COUNT
+
+
+#define kmalloc(x,y) malloc(x)
+#define kfree(x) free(x)
+#define GFP_ATOMIC 0
+
+#define pci_alloc_consistent(x,y,z) (void *)(*(dma_addr_t *)(z) = (dma_addr_t)malloc(y))
+#define pci_free_consistent(x,y,z,d) free(z)
+#define pci_dma_sync_single(x,y,z,d)
+#define pci_unmap_page(x,y,z,d)
+#define pci_unmap_single(x,y,z,d)
+#define pci_present() 1
+
+struct sk_buff
+{
+ u8 * data;
+ u32 len;
+ u8 * data_unaligned;
+};
+
+struct sk_buff * alloc_skb(u32 size, int dummy);
+void dev_kfree_skb_any(struct sk_buff *skb);
+void skb_reserve(struct sk_buff *skb, unsigned int len);
+void skb_put(struct sk_buff *skb, unsigned int len);
+
+#define dev_kfree_skb dev_kfree_skb_any
+#define dev_kfree_skb_irq dev_kfree_skb_any
+
+#define eth_copy_and_sum(dest,src,len,base) memcpy(dest->data,src,len);
+
+
+#endif /* _UBOOT_COMPAT_H__ */