ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7
Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .
The following script has been used for the synchronization:
$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
else
echo "NOT FOUND: $i"
fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )
Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.
Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.
Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .
Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .
Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> # r8a779a0-falcon-u-boot.dts
diff --git a/arch/arm/dts/r8a7791.dtsi b/arch/arm/dts/r8a7791.dtsi
index 59a55e8..d8f91d9 100644
--- a/arch/arm/dts/r8a7791.dtsi
+++ b/arch/arm/dts/r8a7791.dtsi
@@ -68,7 +68,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -77,6 +76,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -97,6 +97,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -160,6 +161,7 @@
compatible = "renesas,r8a7791-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -286,11 +288,22 @@
resets = <&cpg 904>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
};
+ tpu: pwm@e60f0000 {
+ compatible = "renesas,tpu-r8a7791", "renesas,tpu";
+ reg = <0 0xe60f0000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7791-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
@@ -304,7 +317,7 @@
apmu@e6152000 {
compatible = "renesas,r8a7791-apmu", "renesas,apmu";
reg = <0 0xe6152000 0 0x188>;
- cpus = <&cpu0 &cpu1>;
+ cpus = <&cpu0>, <&cpu1>;
};
rst: reset-controller@e6160000 {
@@ -350,7 +363,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -360,7 +373,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -369,7 +382,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -379,7 +392,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -388,7 +401,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -398,7 +411,7 @@
status = "disabled";
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
@@ -407,7 +420,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
@@ -595,7 +608,7 @@
status = "disabled";
};
- usbphy: usb-phy@e6590100 {
+ usbphy: usb-phy-controller@e6590100 {
compatible = "renesas,usb-phy-r8a7791",
"renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
@@ -607,11 +620,11 @@
resets = <&cpg 704>;
status = "disabled";
- usb0: usb-channel@0 {
+ usb0: usb-phy@0 {
reg = <0>;
#phy-cells = <1>;
};
- usb2: usb-channel@2 {
+ usb2: usb-phy@2 {
reg = <2>;
#phy-cells = <1>;
};
@@ -717,6 +730,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
@@ -1067,6 +1081,76 @@
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
adc: adc@e6e54000 {
compatible = "renesas,r8a7791-gyroadc",
"renesas,rcar-gyroadc";
@@ -1482,7 +1566,7 @@
};
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7791",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee100000 0 0x328>;
@@ -1497,7 +1581,7 @@
status = "disabled";
};
- sdhi1: sd@ee140000 {
+ sdhi1: mmc@ee140000 {
compatible = "renesas,sdhi-r8a7791",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee140000 0 0x100>;
@@ -1512,7 +1596,7 @@
status = "disabled";
};
- sdhi2: sd@ee160000 {
+ sdhi2: mmc@ee160000 {
compatible = "renesas,sdhi-r8a7791",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee160000 0 0x100>;
@@ -1681,9 +1765,10 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {