ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7
Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .
The following script has been used for the synchronization:
$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
else
echo "NOT FOUND: $i"
fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )
Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.
Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.
Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .
Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .
Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> # r8a779a0-falcon-u-boot.dts
diff --git a/arch/arm/dts/r8a7793.dtsi b/arch/arm/dts/r8a7793.dtsi
index eef035c..9ebe7bf 100644
--- a/arch/arm/dts/r8a7793.dtsi
+++ b/arch/arm/dts/r8a7793.dtsi
@@ -60,7 +60,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -69,6 +68,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -89,6 +89,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -145,6 +146,7 @@
compatible = "renesas,r8a7793-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -271,7 +273,7 @@
resets = <&cpg 904>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a7793";
reg = <0 0xe6060000 0 0x250>;
};
@@ -290,7 +292,7 @@
apmu@e6152000 {
compatible = "renesas,r8a7793-apmu", "renesas,apmu";
reg = <0 0xe6152000 0 0x188>;
- cpus = <&cpu0 &cpu1>;
+ cpus = <&cpu0>, <&cpu1>;
};
rst: reset-controller@e6160000 {
@@ -336,7 +338,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -346,7 +348,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -355,7 +357,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -365,7 +367,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -374,7 +376,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -384,7 +386,7 @@
status = "disabled";
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
@@ -393,7 +395,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
@@ -1227,7 +1229,7 @@
dma-channels = <13>;
};
- sdhi0: sd@ee100000 {
+ sdhi0: mmc@ee100000 {
compatible = "renesas,sdhi-r8a7793",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee100000 0 0x328>;
@@ -1242,7 +1244,7 @@
status = "disabled";
};
- sdhi1: sd@ee140000 {
+ sdhi1: mmc@ee140000 {
compatible = "renesas,sdhi-r8a7793",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee140000 0 0x100>;
@@ -1257,7 +1259,7 @@
status = "disabled";
};
- sdhi2: sd@ee160000 {
+ sdhi2: mmc@ee160000 {
compatible = "renesas,sdhi-r8a7793",
"renesas,rcar-gen2-sdhi";
reg = <0 0xee160000 0 0x100>;
@@ -1341,9 +1343,10 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {