commit 71d2a5e5ef04a598d5b9da24d4d58a2ae3f662f6
author Marek Vasut <marek.vasut+renesas@mailbox.org> Thu Jan 26 21:01:32 2023 +0100
committer Marek Vasut <marek.vasut+renesas@gmail.com> Thu Feb 02 01:49:19 2023 +0100
tree baddbcc30617aa6f032b0a5f790cf73353e8ace2
parent 9696b246e611d5b1ff6642234ac22235e20f313f

ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7

Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .

The following script has been used for the synchronization:

$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
	if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
		cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
	elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
		cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
	else
		echo "NOT FOUND: $i"
	fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )

Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.

Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.

Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .

Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .

Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> # r8a779a0-falcon-u-boot.dts

arch/arm/dts/r8a7794-silk.dts

diff --git a/arch/arm/dts/r8a7794-silk.dts b/arch/arm/dts/r8a7794-silk.dts
index 2c16ad8..b7af1be 100644
--- a/arch/arm/dts/r8a7794-silk.dts
+++ b/arch/arm/dts/r8a7794-silk.dts
@@ -31,6 +31,8 @@
 		serial0 = &scif2;
 		i2c9 = &gpioi2c1;
 		i2c10 = &i2chdmi;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi1;
 	};
 
 	chosen {
@@ -43,9 +45,12 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
-	gpio-keys {
+	keyboard {
 		compatible = "gpio-keys";
 
+		pinctrl-0 = <&keyboard_pins>;
+		pinctrl-names = "default";
+
 		key-3 {
 			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_3>;
@@ -236,7 +241,6 @@
 		composite-in@20 {
 			compatible = "adi,adv7180";
 			reg = <0x20>;
-			remote = <&vin0>;
 
 			port {
 				adv7180: endpoint {
@@ -255,8 +259,6 @@
 			adi,input-depth = <8>;
 			adi,input-colorspace = "rgb";
 			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
 
 			ports {
 				#address-cells = <1>;
@@ -359,6 +361,11 @@
 		function = "du1";
 	};
 
+	keyboard_pins: keyboard {
+		pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
+		bias-pull-up;
+	};
+
 	ssi_pins: sound {
 		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 		function = "ssi";
@@ -382,7 +389,7 @@
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -390,10 +397,13 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -423,7 +433,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
@@ -520,7 +530,7 @@
 };
 
 &du {
-	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-0 = <&du0_pins>, <&du1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 
@@ -543,7 +553,7 @@
 };
 
 &rcar_sound {
-	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
 	pinctrl-names = "default";
 	status = "okay";