Rename ads5121 board into mpc5121ads
We rename the board so we use a consistent name in U-Boot and in
Linux. Also, we use this opportunity to move the board into the
Freecale vendor directory.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
diff --git a/board/freescale/mpc5121ads/Makefile b/board/freescale/mpc5121ads/Makefile
new file mode 100644
index 0000000..20fbf6e
--- /dev/null
+++ b/board/freescale/mpc5121ads/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(OBJTREE)/board/freescale/common)
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y := $(BOARD).o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc5121ads/README b/board/freescale/mpc5121ads/README
new file mode 100644
index 0000000..defcd6b
--- /dev/null
+++ b/board/freescale/mpc5121ads/README
@@ -0,0 +1,7 @@
+To configure for the current (Rev 3.x) ADS5121
+ make ads5121_config
+This will automatically include PCI, the Real Time CLock, add backup flash
+ability and set the correct frequency and memory configuration.
+
+To configure for the older Rev 2 ADS5121 type (this will not have PCI)
+ make ads5121_rev2_config
diff --git a/board/freescale/mpc5121ads/config.mk b/board/freescale/mpc5121ads/config.mk
new file mode 100644
index 0000000..14998f4
--- /dev/null
+++ b/board/freescale/mpc5121ads/config.mk
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2007 DENX Software Engineering
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFF00000
diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
new file mode 100644
index 0000000..e8eb491
--- /dev/null
+++ b/board/freescale/mpc5121ads/mpc5121ads.c
@@ -0,0 +1,332 @@
+/*
+ * (C) Copyright 2007 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <mpc512x.h>
+#include <asm/bitops.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <fdt_support.h>
+#ifdef CONFIG_MISC_INIT_R
+#include <i2c.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern int mpc5121_diu_init(void);
+
+/* Clocks in use */
+#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
+ CLOCK_SCCR1_LPC_EN | \
+ CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
+ CLOCK_SCCR1_PSCFIFO_EN | \
+ CLOCK_SCCR1_DDR_EN | \
+ CLOCK_SCCR1_FEC_EN | \
+ CLOCK_SCCR1_PATA_EN | \
+ CLOCK_SCCR1_PCI_EN | \
+ CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
+ CLOCK_SCCR2_SPDIF_EN | \
+ CLOCK_SCCR2_DIU_EN | \
+ CLOCK_SCCR2_I2C_EN)
+
+#define CSAW_START(start) ((start) & 0xFFFF0000)
+#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
+
+long int fixed_sdram(void);
+
+int board_early_init_f (void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ u32 lpcaw;
+
+ /*
+ * Initialize Local Window for the CPLD registers access (CS2 selects
+ * the CPLD chip)
+ */
+ im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) |
+ CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE);
+ im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG;
+
+ /*
+ * According to MPC5121e RM, configuring local access windows should
+ * be followed by a dummy read of the config register that was
+ * modified last and an isync
+ */
+ lpcaw = im->sysconf.lpcs2aw;
+ __asm__ __volatile__ ("isync");
+
+ /*
+ * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
+ *
+ * Without this the flash identification routine fails, as it needs to issue
+ * write commands in order to establish the device ID.
+ */
+
+#ifdef CONFIG_ADS5121_REV2
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
+#else
+ if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
+ } else {
+ /* running from Backup flash */
+ *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32;
+ }
+#endif
+ /*
+ * Configure Flash Speed
+ */
+ *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG;
+ if (SVR_MJREV (im->sysconf.spridr) >= 2) {
+ *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING;
+ }
+ /*
+ * Enable clocks
+ */
+ im->clk.sccr[0] = SCCR1_CLOCKS_EN;
+ im->clk.sccr[1] = SCCR2_CLOCKS_EN;
+#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
+ im->clk.sccr[1] |= CLOCK_SCCR2_IIM_EN;
+#endif
+
+ return 0;
+}
+
+phys_size_t initdram (int board_type)
+{
+ u32 msize = 0;
+
+ msize = fixed_sdram ();
+
+ return msize;
+}
+
+/*
+ * fixed sdram init -- the board doesn't use memory modules that have serial presence
+ * detect or similar mechanism for discovery of the DRAM settings
+ */
+long int fixed_sdram (void)
+{
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2 (msize);
+ u32 i;
+
+ /* Initialize IO Control */
+ im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
+
+ /* Initialize DDR Local Window */
+ im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000;
+ im->sysconf.ddrlaw.ar = msize_log2 - 1;
+
+ /*
+ * According to MPC5121e RM, configuring local access windows should
+ * be followed by a dummy read of the config register that was
+ * modified last and an isync
+ */
+ i = im->sysconf.ddrlaw.ar;
+ __asm__ __volatile__ ("isync");
+
+ /* Enable DDR */
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN;
+
+ /* Initialize DDR Priority Manager */
+ im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1;
+ im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2;
+ im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG;
+ im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU;
+ im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML;
+ im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU;
+ im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML;
+ im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU;
+ im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML;
+ im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU;
+ im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML;
+ im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU;
+ im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML;
+ im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU;
+ im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL;
+ im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU;
+ im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL;
+ im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU;
+ im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL;
+ im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU;
+ im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL;
+ im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU;
+ im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL;
+
+ /* Initialize MDDRC */
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG;
+ im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0;
+ im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1;
+ im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2;
+
+ /* Initialize DDR */
+ for (i = 0; i < 10; i++)
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+
+ /* Start MDDRC */
+ im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN;
+ im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN;
+
+ return msize;
+}
+
+int misc_init_r(void)
+{
+ u8 tmp_val;
+
+ /* Using this for DIU init before the driver in linux takes over
+ * Enable the TFP410 Encoder (I2C address 0x38)
+ */
+
+ i2c_set_bus_num(2);
+ tmp_val = 0xBF;
+ i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
+ /* Verify if enabled */
+ tmp_val = 0;
+ i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
+ debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
+
+ tmp_val = 0x10;
+ i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
+ /* Verify if enabled */
+ tmp_val = 0;
+ i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
+ debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
+
+#ifdef CONFIG_FSL_DIU_FB
+# if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
+ mpc5121_diu_init();
+# endif
+#endif
+ return 0;
+}
+
+static iopin_t ioregs_init[] = {
+ /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
+ {
+ IOCTL_SPDIF_TXCLK, 3, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* Set highest Slew on 9 PATA pins */
+ {
+ IOCTL_PATA_CE1, 9, 1,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
+ {
+ IOCTL_PSC0_0, 15, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=SPDIF_TXCLK */
+ {
+ IOCTL_LPC_CS1, 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
+ {
+ IOCTL_I2C1_SCL, 2, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU CLK */
+ {
+ IOCTL_PSC6_0, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU_HSYNC */
+ {
+ IOCTL_PSC6_1, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+ {
+ IOCTL_PSC6_4, 26, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ }
+};
+
+static iopin_t rev2_silicon_pci_ioregs_init[] = {
+ /* FUNC0=PCI Sets next 54 to PCI pads */
+ {
+ IOCTL_PCI_AD31, 54, 0,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
+ }
+};
+
+int checkboard (void)
+{
+ ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00);
+ uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02);
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+
+ printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
+ brd_rev, cpld_rev);
+
+ /* initialize function mux & slew rate IO inter alia on IO Pins */
+ iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
+
+ if (SVR_MJREV (im->sysconf.spridr) >= 2)
+ iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */