mx6cuboxi: consolidate board detection and add som revision checking
In order to properly detect the board the checks need to be done
in a specific order. Move these tests back into a single enum
function that will always return the proper the board it is checking.
This also adds the best test we have for detecting the rev 1.5 som,
and it simplifies the device-tree filename building.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 1fb3c69..1567cf0 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -57,6 +57,13 @@
#define ETH_PHY_RESET IMX_GPIO_NR(4, 15)
#define USB_H1_VBUS IMX_GPIO_NR(1, 0)
+enum board_type {
+ CUBOXI = 0x00,
+ HUMMINGBOARD = 0x01,
+ HUMMINGBOARD2 = 0x02,
+ UNKNOWN = 0x03,
+};
+
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
@@ -77,10 +84,17 @@
IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
};
-static iomux_v3_cfg_t const hb_cbi_sense[] = {
+static iomux_v3_cfg_t const board_detect[] = {
/* These pins are for sensing if it is a CuBox-i or a HummingBoard */
IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_DA4__GPIO3_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const som_rev_detect[] = {
+ /* These pins are for sensing if it is a CuBox-i or a HummingBoard */
+ IOMUX_PADS(PAD_CSI0_DAT14__GPIO6_IO00 | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_CSI0_DAT18__GPIO6_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL)),
};
static iomux_v3_cfg_t const usb_pads[] = {
@@ -333,88 +347,110 @@
return ret;
}
-static bool is_hummingboard(void)
+static enum board_type board_type(void)
{
- int val1, val2;
+ int val1, val2, val3;
- SETUP_IOMUX_PADS(hb_cbi_sense);
-
- gpio_direction_input(IMX_GPIO_NR(4, 9));
- gpio_direction_input(IMX_GPIO_NR(3, 4));
-
- val1 = gpio_get_value(IMX_GPIO_NR(4, 9));
- val2 = gpio_get_value(IMX_GPIO_NR(3, 4));
+ SETUP_IOMUX_PADS(board_detect);
/*
* Machine selection -
- * Machine val1, val2
- * -------------------------
- * HB2 x x
- * HB rev 3.x x 0
- * CBi 0 1
- * HB 1 1
+ * Machine val1, val2, val3
+ * ----------------------------
+ * HB2 x x 0
+ * HB rev 3.x x 0 x
+ * CBi 0 1 x
+ * HB 1 1 x
*/
- if (val2 == 0)
- return true;
- else if (val1 == 0)
- return false;
- else
- return true;
-}
-
-static bool is_hummingboard2(void)
-{
- int val1;
-
- SETUP_IOMUX_PADS(hb_cbi_sense);
-
gpio_direction_input(IMX_GPIO_NR(2, 8));
+ val3 = gpio_get_value(IMX_GPIO_NR(2, 8));
- val1 = gpio_get_value(IMX_GPIO_NR(2, 8));
+ if (val3 == 0)
+ return HUMMINGBOARD2;
- /*
- * Machine selection -
- * Machine val1
- * -------------------
- * HB2 0
- * HB rev 3.x x
- * CBi x
- * HB x
- */
+ gpio_direction_input(IMX_GPIO_NR(3, 4));
+ val2 = gpio_get_value(IMX_GPIO_NR(3, 4));
- if (val1 == 0)
+ if (val2 == 0)
+ return HUMMINGBOARD;
+
+ gpio_direction_input(IMX_GPIO_NR(4, 9));
+ val1 = gpio_get_value(IMX_GPIO_NR(4, 9));
+
+ if (val1 == 0) {
+ return CUBOXI;
+ } else {
+ return HUMMINGBOARD;
+ }
+}
+
+static bool is_rev_15_som(void)
+{
+ int val1, val2;
+ SETUP_IOMUX_PADS(som_rev_detect);
+
+ val1 = gpio_get_value(IMX_GPIO_NR(6, 0));
+ val2 = gpio_get_value(IMX_GPIO_NR(6, 4));
+
+ if (val1 == 1 && val2 == 0)
return true;
- else
- return false;
+
+ return false;
}
int checkboard(void)
{
- if (is_hummingboard2())
- puts("Board: MX6 Hummingboard2\n");
- else if (is_hummingboard())
- puts("Board: MX6 Hummingboard\n");
- else
- puts("Board: MX6 Cubox-i\n");
+ switch (board_type()) {
+ case CUBOXI:
+ puts("Board: MX6 Cubox-i");
+ break;
+ case HUMMINGBOARD:
+ puts("Board: MX6 HummingBoard");
+ break;
+ case HUMMINGBOARD2:
+ puts("Board: MX6 HummingBoard2");
+ break;
+ case UNKNOWN:
+ default:
+ puts("Board: Unknown\n");
+ goto out;
+ }
+ if (is_rev_15_som())
+ puts(" (som rev 1.5)\n");
+ else
+ puts("\n");
+
+out:
return 0;
}
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- if (is_hummingboard2())
- env_set("board_name", "HUMMINGBOARD2");
- else if (is_hummingboard())
- env_set("board_name", "HUMMINGBOARD");
- else
+ switch (board_type()) {
+ case CUBOXI:
env_set("board_name", "CUBOXI");
+ break;
+ case HUMMINGBOARD:
+ env_set("board_name", "HUMMINGBOARD");
+ break;
+ case HUMMINGBOARD2:
+ env_set("board_name", "HUMMINGBOARD2");
+ break;
+ case UNKNOWN:
+ default:
+ env_set("board_name", "CUBOXI");
+ }
if (is_mx6dq())
env_set("board_rev", "MX6Q");
else
env_set("board_rev", "MX6DL");
+
+ if (is_rev_15_som())
+ env_set("som_rev", "V15");
#endif
return 0;