| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Generic PCIE host provided by e.g. QEMU |
| * |
| * Heavily based on drivers/pci/pcie_xilinx.c |
| * |
| * Copyright (C) 2016 Imagination Technologies |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <pci.h> |
| |
| #include <asm/io.h> |
| |
| /** |
| * struct generic_ecam_pcie - generic_ecam PCIe controller state |
| * @cfg_base: The base address of memory mapped configuration space |
| */ |
| struct generic_ecam_pcie { |
| void *cfg_base; |
| pci_size_t size; |
| int first_busno; |
| }; |
| |
| /** |
| * pci_generic_ecam_conf_address() - Calculate the address of a config access |
| * @bus: Pointer to the PCI bus |
| * @bdf: Identifies the PCIe device to access |
| * @offset: The offset into the device's configuration space |
| * @paddress: Pointer to the pointer to write the calculates address to |
| * |
| * Calculates the address that should be accessed to perform a PCIe |
| * configuration space access for a given device identified by the PCIe |
| * controller device @pcie and the bus, device & function numbers in @bdf. If |
| * access to the device is not valid then the function will return an error |
| * code. Otherwise the address to access will be written to the pointer pointed |
| * to by @paddress. |
| */ |
| static int pci_generic_ecam_conf_address(const struct udevice *bus, |
| pci_dev_t bdf, uint offset, |
| void **paddress) |
| { |
| struct generic_ecam_pcie *pcie = dev_get_priv(bus); |
| void *addr; |
| |
| addr = pcie->cfg_base; |
| addr += (PCI_BUS(bdf) - pcie->first_busno) << 20; |
| addr += PCI_DEV(bdf) << 15; |
| addr += PCI_FUNC(bdf) << 12; |
| addr += offset; |
| *paddress = addr; |
| |
| return 0; |
| } |
| |
| static bool pci_generic_ecam_addr_valid(const struct udevice *bus, |
| pci_dev_t bdf) |
| { |
| struct generic_ecam_pcie *pcie = dev_get_priv(bus); |
| int num_buses = DIV_ROUND_UP(pcie->size, 1 << 16); |
| |
| return (PCI_BUS(bdf) >= pcie->first_busno && |
| PCI_BUS(bdf) < pcie->first_busno + num_buses); |
| } |
| |
| /** |
| * pci_generic_ecam_read_config() - Read from configuration space |
| * @bus: Pointer to the PCI bus |
| * @bdf: Identifies the PCIe device to access |
| * @offset: The offset into the device's configuration space |
| * @valuep: A pointer at which to store the read value |
| * @size: Indicates the size of access to perform |
| * |
| * Read a value of size @size from offset @offset within the configuration |
| * space of the device identified by the bus, device & function numbers in @bdf |
| * on the PCI bus @bus. |
| */ |
| static int pci_generic_ecam_read_config(const struct udevice *bus, |
| pci_dev_t bdf, uint offset, |
| ulong *valuep, enum pci_size_t size) |
| { |
| if (!pci_generic_ecam_addr_valid(bus, bdf)) { |
| *valuep = pci_get_ff(size); |
| return 0; |
| } |
| |
| return pci_generic_mmap_read_config(bus, pci_generic_ecam_conf_address, |
| bdf, offset, valuep, size); |
| } |
| |
| /** |
| * pci_generic_ecam_write_config() - Write to configuration space |
| * @bus: Pointer to the PCI bus |
| * @bdf: Identifies the PCIe device to access |
| * @offset: The offset into the device's configuration space |
| * @value: The value to write |
| * @size: Indicates the size of access to perform |
| * |
| * Write the value @value of size @size from offset @offset within the |
| * configuration space of the device identified by the bus, device & function |
| * numbers in @bdf on the PCI bus @bus. |
| */ |
| static int pci_generic_ecam_write_config(struct udevice *bus, pci_dev_t bdf, |
| uint offset, ulong value, |
| enum pci_size_t size) |
| { |
| if (!pci_generic_ecam_addr_valid(bus, bdf)) |
| return 0; |
| |
| return pci_generic_mmap_write_config(bus, pci_generic_ecam_conf_address, |
| bdf, offset, value, size); |
| } |
| |
| /** |
| * pci_generic_ecam_of_to_plat() - Translate from DT to device state |
| * @dev: A pointer to the device being operated on |
| * |
| * Translate relevant data from the device tree pertaining to device @dev into |
| * state that the driver will later make use of. This state is stored in the |
| * device's private data structure. |
| * |
| * Return: 0 on success, else -EINVAL |
| */ |
| static int pci_generic_ecam_of_to_plat(struct udevice *dev) |
| { |
| struct generic_ecam_pcie *pcie = dev_get_priv(dev); |
| struct fdt_resource reg_res; |
| DECLARE_GLOBAL_DATA_PTR; |
| int err; |
| |
| err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg", |
| 0, ®_res); |
| if (err < 0) { |
| pr_err("\"reg\" resource not found\n"); |
| return err; |
| } |
| |
| pcie->size = fdt_resource_size(®_res); |
| pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE); |
| |
| return 0; |
| } |
| |
| static int pci_generic_ecam_probe(struct udevice *dev) |
| { |
| struct generic_ecam_pcie *pcie = dev_get_priv(dev); |
| |
| pcie->first_busno = dev_seq(dev); |
| |
| return 0; |
| } |
| |
| static const struct dm_pci_ops pci_generic_ecam_ops = { |
| .read_config = pci_generic_ecam_read_config, |
| .write_config = pci_generic_ecam_write_config, |
| }; |
| |
| static const struct udevice_id pci_generic_ecam_ids[] = { |
| { .compatible = "pci-host-ecam-generic" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(pci_generic_ecam) = { |
| .name = "pci_generic_ecam", |
| .id = UCLASS_PCI, |
| .of_match = pci_generic_ecam_ids, |
| .ops = &pci_generic_ecam_ops, |
| .probe = pci_generic_ecam_probe, |
| .of_to_plat = pci_generic_ecam_of_to_plat, |
| .priv_auto = sizeof(struct generic_ecam_pcie), |
| }; |