Minor code cleanup.
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 6cff3a2..ab42119 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -44,10 +44,10 @@
(defined(CONFIG_440SP) || defined(CONFIG_440SPE))
#ifndef TRUE
-#define TRUE 1
+#define TRUE 1
#endif
#ifndef FALSE
-#define FALSE 0
+#define FALSE 0
#endif
#define SDRAM_DDR1 1
@@ -114,7 +114,7 @@
static void program_mode(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas);
+ ddr_cas_id_t *selected_cas);
static void program_tr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -130,7 +130,7 @@
static void program_initplr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas);
+ ddr_cas_id_t selected_cas);
static unsigned long is_ecc_enabled(void);
static void program_ecc(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
@@ -139,9 +139,9 @@
unsigned long num_bytes);
#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
-static void test(void);
+static void test(void);
#else
-static void DQS_calibration_process(void);
+static void DQS_calibration_process(void);
#endif
static void program_DQS_calibration(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
@@ -291,12 +291,12 @@
* .data sections. It also cannot call routines that require these sections.
*-----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------
- * Function: initdram
+ * Function: initdram
* Description: Configures SDRAM memory banks for DDR operation.
- * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
- * via the IIC bus and then configures the DDR SDRAM memory
- * banks appropriately. If Auto Memory Configuration is
- * not used, it is assumed that no DIMM is plugged
+ * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
+ * via the IIC bus and then configures the DDR SDRAM memory
+ * banks appropriately. If Auto Memory Configuration is
+ * not used, it is assumed that no DIMM is plugged
*-----------------------------------------------------------------------------*/
long int initdram(int board_type)
{
@@ -532,10 +532,10 @@
#ifdef CONFIG_ADD_RAM_INFO
void board_add_ram_info(int use_default)
{
- if (is_ecc_enabled())
- puts(" (ECC enabled)");
- else
- puts(" (ECC not enabled)");
+ if (is_ecc_enabled())
+ puts(" (ECC enabled)");
+ else
+ puts(" (ECC not enabled)");
}
#endif
@@ -1092,13 +1092,13 @@
static void program_initplr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas)
+ ddr_cas_id_t selected_cas)
{
unsigned long MR_CAS_value = 0;
/******************************************************
** Assumption: if more than one DIMM, all DIMMs are the same
- ** as already checked in check_memory_type
+ ** as already checked in check_memory_type
******************************************************/
if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) {