Kirkwood: bugfix: broken early console messages
It has been observed that, the complete u-boot banner
does not appear on the console when the system is booted
from NAND/NOR/SPI flash.
This patch fixes this issue on all Marvell boards by adding
board_early_init_f() support
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c
index 4df4e9b..1f0e67a 100644
--- a/board/Marvell/guruplug/guruplug.c
+++ b/board/Marvell/guruplug/guruplug.c
@@ -30,7 +30,7 @@
DECLARE_GLOBAL_DATA_PTR;
-int board_init(void)
+int board_early_init_f(void)
{
/*
* default gpio configuration
@@ -96,7 +96,11 @@
0
};
kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+int board_init(void)
+{
/*
* arch number of board
*/
diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
index 93d1400..80fd20b 100644
--- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
+++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
@@ -32,7 +32,7 @@
DECLARE_GLOBAL_DATA_PTR;
-int board_init(void)
+int board_early_init_f(void)
{
/*
* default gpio configuration
@@ -98,7 +98,11 @@
0
};
kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+int board_init(void)
+{
/*
* arch number of board
*/
diff --git a/board/Marvell/openrd_base/openrd_base.c b/board/Marvell/openrd_base/openrd_base.c
index d006b2d..10109c1 100644
--- a/board/Marvell/openrd_base/openrd_base.c
+++ b/board/Marvell/openrd_base/openrd_base.c
@@ -35,7 +35,7 @@
DECLARE_GLOBAL_DATA_PTR;
-int board_init(void)
+int board_early_init_f(void)
{
/*
* default gpio configuration
@@ -102,7 +102,11 @@
};
kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+int board_init(void)
+{
/*
* arch number of board
*/
diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c
index 0d76146..e69e035 100644
--- a/board/Marvell/rd6281a/rd6281a.c
+++ b/board/Marvell/rd6281a/rd6281a.c
@@ -31,7 +31,7 @@
DECLARE_GLOBAL_DATA_PTR;
-int board_init(void)
+int board_early_init_f(void)
{
/*
* default gpio configuration
@@ -97,7 +97,11 @@
0
};
kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+int board_init(void)
+{
/*
* arch number of board
*/
diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
index 173a7b8..d7dc80c 100644
--- a/board/Marvell/sheevaplug/sheevaplug.c
+++ b/board/Marvell/sheevaplug/sheevaplug.c
@@ -30,7 +30,7 @@
DECLARE_GLOBAL_DATA_PTR;
-int board_init(void)
+int board_early_init_f(void)
{
/*
* default gpio configuration
@@ -96,7 +96,11 @@
0
};
kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+int board_init(void)
+{
/*
* arch number of board
*/