pinctrl: sunxi: Add MMC pinmuxes
Pin lists and mux values were taken from the Linux drivers.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index d19cf27..7e66c30 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -237,6 +237,8 @@
{ "gpio_out", 1 },
{ "i2c0", 3 }, /* PE11-PE12 */
{ "i2c1", 3 }, /* PD5-PD6 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 3 }, /* PC0-PC2 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -257,6 +259,14 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PB0-PB1 */
{ "i2c1", 2 }, /* PB18-PB19 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+#if IS_ENABLED(CONFIG_MMC1_PINS_PH)
+ { "mmc1", 5 }, /* PH22-PH27 */
+#else
+ { "mmc1", 4 }, /* PG0-PG5 */
+#endif
+ { "mmc2", 3 }, /* PC6-PC15 */
+ { "mmc3", 2 }, /* PI4-PI9 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
#else
@@ -277,6 +287,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PB0-PB1 */
{ "i2c1", 2 }, /* PB15-PB16 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG3-PG8 */
+ { "mmc2", 3 }, /* PC6-PC15 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
#else
@@ -298,6 +311,10 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PH14-PH15 */
{ "i2c1", 2 }, /* PH16-PH17 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC6-PC15, PC24 */
+ { "mmc3", 4 }, /* PC6-PC15, PC24 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -333,6 +350,13 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PB0-PB1 */
{ "i2c1", 2 }, /* PB18-PB19 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+#if IS_ENABLED(CONFIG_MMC1_PINS_PH)
+ { "mmc1", 5 }, /* PH22-PH27 */
+#else
+ { "mmc1", 4 }, /* PG0-PG5 */
+#endif
+ { "mmc2", 3 }, /* PC5-PC15, PC24 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
#else
@@ -352,6 +376,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PH2-PH3 */
{ "i2c1", 2 }, /* PH4-PH5 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC5-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#endif
@@ -385,6 +412,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PH2-PH3 */
{ "i2c1", 2 }, /* PH4-PH5 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC5-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -407,6 +437,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PH0-PH1 */
{ "i2c1", 2 }, /* PH2-PH3 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC5-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -443,6 +476,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PA11-PA12 */
{ "i2c1", 3 }, /* PA18-PA19 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC5-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -479,6 +515,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PB6-PB7 */
{ "i2c1", 2 }, /* PB8-PB9 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 2 }, /* PC0-PC10 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -501,6 +540,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PH0-PH1 */
{ "i2c1", 2 }, /* PH2-PH3 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC6-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 4 }, /* PF2-PF4 */
#else
@@ -536,6 +578,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PH0-PH1 */
{ "i2c1", 2 }, /* PH2-PH3 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC1-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -572,6 +617,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PA11-PA12 */
{ "i2c1", 3 }, /* PA18-PA19 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC1-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -594,6 +642,9 @@
{ "gpio_out", 1 },
{ "i2c0", 2 }, /* PD25-PD26 */
{ "i2c1", 4 }, /* PH5-PH6 */
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC1-PC14 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else
@@ -627,6 +678,9 @@
{ "emac0", 2 }, /* PI0-PI16 */
{ "gpio_in", 0 },
{ "gpio_out", 1 },
+ { "mmc0", 2 }, /* PF0-PF5 */
+ { "mmc1", 2 }, /* PG0-PG5 */
+ { "mmc2", 3 }, /* PC0-PC16 */
#if IS_ENABLED(CONFIG_UART0_PORT_F)
{ "uart0", 3 }, /* PF2-PF4 */
#else