powerpc: P1010RDB: Remove macros CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB
Remove CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB and split TARGET_P1010RDB
to TARGET_P1010RDB_PA and TARGET_P1010RDB_PB in Kconfig.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index 8eecb06..65bb575 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -54,7 +54,7 @@
struct cpld_data {
u8 cpld_ver; /* cpld revision */
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
u8 pcba_ver; /* pcb revision number */
u8 twindie_ddr3;
u8 res1[6];
@@ -69,7 +69,7 @@
u8 por1; /* POR Options */
u8 por2; /* POR Options */
u8 por3; /* POR Options */
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
u8 rom_loc;
#endif
};
@@ -135,7 +135,7 @@
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u8 tmp;
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
switch (ctrl_type) {
@@ -171,7 +171,7 @@
default:
break;
}
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
uint orig_bus = i2c_get_bus_num();
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
@@ -245,7 +245,7 @@
return 0;
}
-#ifdef CONFIG_P1010RDB_PB
+#ifdef CONFIG_TARGET_P1010RDB_PB
int i2c_pca9557_read(int type)
{
u8 val;
@@ -275,9 +275,9 @@
u8 val;
cpu = gd->arch.cpu;
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
printf("Board: %sRDB-PA, ", cpu->name);
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
printf("Board: %sRDB-PB, ", cpu->name);
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE);
@@ -290,10 +290,10 @@
config_board_mux(MUX_TYPE_IFC);
#endif
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
val = (in_8(&cpld_data->pcba_ver) & 0xf);
printf("PCB: v%x.0\n", val);
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
val = in_8(&cpld_data->cpld_ver);
printf("CPLD: v%x.%x, ", val >> 4, val & 0xf);
printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER));
@@ -544,7 +544,7 @@
else if (hwconfig("ifc"))
config_board_mux(MUX_TYPE_IFC);
-#ifdef CONFIG_P1010RDB_PB
+#ifdef CONFIG_TARGET_P1010RDB_PB
setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
#endif
return 0;