acpi: Add fill_madt to acpi_ops
Add a new method to acpi_ops to let drivers fill out ACPI MADT.
The code is unused for now until drivers implement the new ops.
TEST: Booted on QEMU sbsa using driver model generated MADT.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/lib/acpi_table.c b/arch/arm/lib/acpi_table.c
index 286ed7c..e0add04 100644
--- a/arch/arm/lib/acpi_table.c
+++ b/arch/arm/lib/acpi_table.c
@@ -11,6 +11,8 @@
#include <acpi/acpigen.h>
#include <acpi/acpi_device.h>
#include <acpi/acpi_table.h>
+#include <dm/acpi.h>
+#include <dm/uclass.h>
void acpi_write_madt_gicc(struct acpi_madt_gicc *gicc, uint cpu_num,
uint perf_gsiv, ulong phys_base, ulong gicv,
@@ -112,3 +114,14 @@
return offset;
}
+
+void *acpi_fill_madt(struct acpi_madt *madt, struct acpi_ctx *ctx)
+{
+ uclass_probe_all(UCLASS_CPU);
+ uclass_probe_all(UCLASS_IRQ);
+
+ /* All SoCs must use the driver model */
+ acpi_fill_madt_subtbl(ctx);
+
+ return ctx->current;
+}
diff --git a/drivers/core/acpi.c b/drivers/core/acpi.c
index 9f78422..4763963 100644
--- a/drivers/core/acpi.c
+++ b/drivers/core/acpi.c
@@ -48,6 +48,7 @@
METHOD_FILL_SSDT,
METHOD_INJECT_DSDT,
METHOD_SETUP_NHLT,
+ METHOD_FILL_MADT,
};
/* Prototype for all methods */
@@ -282,6 +283,8 @@
switch (method) {
case METHOD_WRITE_TABLES:
return aops->write_tables;
+ case METHOD_FILL_MADT:
+ return aops->fill_madt;
case METHOD_FILL_SSDT:
return aops->fill_ssdt;
case METHOD_INJECT_DSDT:
@@ -328,6 +331,19 @@
return 0;
}
+int acpi_fill_madt_subtbl(struct acpi_ctx *ctx)
+{
+ int ret;
+
+ log_debug("Writing MADT table\n");
+ ret = acpi_recurse_method(ctx, dm_root(), METHOD_FILL_MADT, TYPE_NONE);
+ log_debug("Writing MADT finished, err=%d\n", ret);
+ if (ret)
+ return log_msg_ret("build", ret);
+
+ return ret;
+}
+
int acpi_fill_ssdt(struct acpi_ctx *ctx)
{
void *start = ctx->current;
diff --git a/include/dm/acpi.h b/include/dm/acpi.h
index 3adfe21..d6bc0c0 100644
--- a/include/dm/acpi.h
+++ b/include/dm/acpi.h
@@ -147,6 +147,22 @@
int (*write_tables)(const struct udevice *dev, struct acpi_ctx *ctx);
/**
+ * fill_madt() - Generate MADT sub-tables for a device
+ *
+ * This is called to create the MADT table. The method should write out
+ * whatever sub-table is needed by this device. It will end up in the
+ * MADT table.
+ *
+ * Note that this is called 'fill' because the entire contents of the
+ * MADT is build by calling this method on all devices.
+ *
+ * @dev: Device to write
+ * @ctx: ACPI context to use
+ * @return 0 if OK, -ve on error
+ */
+ int (*fill_madt)(const struct udevice *dev, struct acpi_ctx *ctx);
+
+ /**
* fill_ssdt() - Generate SSDT code for a device
*
* This is called to create the SSDT code. The method should write out
@@ -232,6 +248,16 @@
int acpi_write_dev_tables(struct acpi_ctx *ctx);
/**
+ * acpi_fill_madt_subtbl() - Generate ACPI tables for MADT
+ *
+ * This is called to create the MADT sub-tables for all devices.
+ *
+ * @ctx: ACPI context to use
+ * Return: 0 if OK, -ve on error
+ */
+int acpi_fill_madt_subtbl(struct acpi_ctx *ctx);
+
+/**
* acpi_fill_ssdt() - Generate ACPI tables for SSDT
*
* This is called to create the SSDT code for all devices.
diff --git a/lib/acpi/acpi_table.c b/lib/acpi/acpi_table.c
index 639d781..5b9b4d2 100644
--- a/lib/acpi/acpi_table.c
+++ b/lib/acpi/acpi_table.c
@@ -257,11 +257,11 @@
header->revision = ACPI_MADT_REV_ACPI_3_0;
acpi_inc(ctx, sizeof(struct acpi_madt));
+ /* TODO: Get rid of acpi_fill_madt and use driver model */
current = acpi_fill_madt(madt, ctx);
/* (Re)calculate length and checksum */
header->length = (uintptr_t)current - (uintptr_t)madt;
-
header->checksum = table_compute_checksum((void *)madt, header->length);
acpi_add_table(ctx, madt);
ctx->current = (void *)madt + madt->header.length;
diff --git a/test/dm/acpi.c b/test/dm/acpi.c
index 7ccd7f8..39a26bb 100644
--- a/test/dm/acpi.c
+++ b/test/dm/acpi.c
@@ -95,6 +95,21 @@
return acpi_copy_name(out_name, ACPI_TEST_DEV_NAME);
}
+static int testacpi_fill_madt(const struct udevice *dev, struct acpi_ctx *ctx)
+{
+ u64 *data = ctx->current;
+
+ /* Only fill madt once */
+ if (device_get_uclass_id(dev->parent) != UCLASS_TEST_ACPI)
+ return 0;
+
+ *data = 0xdeadbeef;
+
+ acpi_inc(ctx, sizeof(u64));
+
+ return 0;
+}
+
static int testacpi_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx)
{
const char *data;
@@ -124,6 +139,7 @@
struct acpi_ops testacpi_ops = {
.get_name = testacpi_get_name,
.write_tables = testacpi_write_tables,
+ .fill_madt = testacpi_fill_madt,
.fill_ssdt = testacpi_fill_ssdt,
.inject_dsdt = testacpi_inject_dsdt,
};
@@ -527,6 +543,33 @@
}
DM_TEST(dm_test_acpi_fill_ssdt, UTF_SCAN_PDATA | UTF_SCAN_FDT);
+/* Test acpi_fill_madt() */
+static int dm_test_acpi_fill_madt(struct unit_test_state *uts)
+{
+ struct acpi_ctx ctx;
+ u64 *buf;
+
+ buf = malloc(BUF_SIZE);
+ ut_assertnonnull(buf);
+
+ acpi_reset_items();
+ ctx.current = buf;
+ buf[1] = 'z'; /* sentinel */
+ ut_assertok(acpi_fill_madt_subtbl(&ctx));
+
+ /*
+ * These values come from acpi-test2's acpi-ssdt-test-data property.
+ * This device comes first because of u-boot,acpi-ssdt-order
+ */
+ ut_asserteq(0xdeadbeef, buf[0]);
+
+ ut_asserteq('z', buf[1]);
+
+ return 0;
+}
+
+DM_TEST(dm_test_acpi_fill_madt, UTF_SCAN_PDATA | UTF_SCAN_FDT);
+
/* Test acpi_inject_dsdt() */
static int dm_test_acpi_inject_dsdt(struct unit_test_state *uts)
{