| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Freescale i.MX6 PCIe Endpoint controller |
| |
| maintainers: |
| - Lucas Stach <l.stach@pengutronix.de> |
| - Richard Zhu <hongxing.zhu@nxp.com> |
| |
| description: |+ |
| This PCIe controller is based on the Synopsys DesignWare PCIe IP and |
| thus inherits all the common properties defined in snps,dw-pcie-ep.yaml. |
| The controller instances are dual mode where in they can work either in |
| Root Port mode or Endpoint mode but one at a time. |
| |
| properties: |
| compatible: |
| enum: |
| - fsl,imx8mm-pcie-ep |
| - fsl,imx8mq-pcie-ep |
| - fsl,imx8mp-pcie-ep |
| |
| reg: |
| minItems: 2 |
| |
| reg-names: |
| items: |
| - const: dbi |
| - const: addr_space |
| |
| clocks: |
| minItems: 3 |
| items: |
| - description: PCIe bridge clock. |
| - description: PCIe bus clock. |
| - description: PCIe PHY clock. |
| - description: Additional required clock entry for imx6sx-pcie, |
| imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep. |
| |
| clock-names: |
| minItems: 3 |
| maxItems: 4 |
| |
| interrupts: |
| items: |
| - description: builtin eDMA interrupter. |
| |
| interrupt-names: |
| items: |
| - const: dma |
| |
| required: |
| - compatible |
| - reg |
| - reg-names |
| - interrupts |
| - interrupt-names |
| |
| allOf: |
| - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# |
| - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml# |
| - if: |
| properties: |
| compatible: |
| enum: |
| - fsl,imx8mq-pcie-ep |
| then: |
| properties: |
| clocks: |
| minItems: 4 |
| clock-names: |
| items: |
| - const: pcie |
| - const: pcie_bus |
| - const: pcie_phy |
| - const: pcie_aux |
| else: |
| properties: |
| clocks: |
| maxItems: 3 |
| clock-names: |
| items: |
| - const: pcie |
| - const: pcie_bus |
| - const: pcie_aux |
| |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/imx8mp-clock.h> |
| #include <dt-bindings/power/imx8mp-power.h> |
| #include <dt-bindings/reset/imx8mp-reset.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| pcie_ep: pcie-ep@33800000 { |
| compatible = "fsl,imx8mp-pcie-ep"; |
| reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>; |
| reg-names = "dbi", "addr_space"; |
| clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, |
| <&clk IMX8MP_CLK_HSIO_AXI>, |
| <&clk IMX8MP_CLK_PCIE_ROOT>; |
| clock-names = "pcie", "pcie_bus", "pcie_aux"; |
| assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; |
| assigned-clock-rates = <10000000>; |
| assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; |
| num-lanes = <1>; |
| interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */ |
| interrupt-names = "dma"; |
| fsl,max-link-speed = <3>; |
| power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; |
| resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, |
| <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; |
| reset-names = "apps", "turnoff"; |
| phys = <&pcie_phy>; |
| phy-names = "pcie-phy"; |
| num-ib-windows = <4>; |
| num-ob-windows = <4>; |
| }; |