mips: mtmips: add two reference boards for mt7620
The mt7620_rfb board supports integrated 10/100M PHYs plus two external
giga PHYs. It also has 8MB SPI-NOR, mini PCI-e x1 slot, SDHC and USB.
The mt7620_mt7530_rfb boards supports an external MT7530 giga switch and a
16MB SPI-NOR flash.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index e82f96d..7c42923 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -14,6 +14,8 @@
dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
+dtb-$(CONFIG_BOARD_MT7620_RFB) += mediatek,mt7620-rfb.dtb
+dtb-$(CONFIG_BOARD_MT7620_MT7530_RFB) += mediatek,mt7620-mt7530-rfb.dtb
dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb
dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb
dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb
diff --git a/arch/mips/dts/mediatek,mt7620-mt7530-rfb.dts b/arch/mips/dts/mediatek,mt7620-mt7530-rfb.dts
new file mode 100644
index 0000000..8bc3b16
--- /dev/null
+++ b/arch/mips/dts/mediatek,mt7620-mt7530-rfb.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "mt7620.dtsi"
+
+/ {
+ compatible = "mediatek,mt7620-mt7530-rfb", "mediatek,mt7620-soc";
+ model = "MediaTek MT7620-MT7530 RFB (MTKC712)";
+
+ aliases {
+ serial0 = &uartlite;
+ spi0 = &spi0;
+ };
+
+ chosen {
+ stdout-path = &uartlite;
+ };
+};
+
+&uartlite {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pin_state {
+ pleds {
+ groups = "ephy led", "wled";
+ function = "led";
+ };
+
+ gpios {
+ groups = "pa", "uartf";
+ function = "gpio";
+ };
+ };
+
+ gsw_pins: gsw_pins {
+ mdio {
+ groups = "mdio";
+ function = "mdio";
+ };
+
+ rgmii1 {
+ groups = "rgmii1";
+ function = "rgmii1";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <2>;
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ };
+};
+
+&gpio0 {
+ pa0_pull_low {
+ gpio-hog;
+ output-low;
+ gpios = <20 GPIO_ACTIVE_HIGH>;
+ };
+
+ pa1_pull_low {
+ gpio-hog;
+ output-low;
+ gpios = <21 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+ð {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsw_pins>;
+
+ port5 {
+ phy-mode = "rgmii";
+ phy-addr = <5>;
+ fixed-link {
+ full-duplex;
+ speed = <1000>;
+ mediatek,mt7530;
+ mediatek,mt7530-reset = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/arch/mips/dts/mediatek,mt7620-rfb.dts b/arch/mips/dts/mediatek,mt7620-rfb.dts
new file mode 100644
index 0000000..616903e
--- /dev/null
+++ b/arch/mips/dts/mediatek,mt7620-rfb.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "mt7620.dtsi"
+
+/ {
+ compatible = "mediatek,mt7620-rfb", "mediatek,mt7620-soc";
+ model = "MediaTek MT7620 RFB (WS2120)";
+
+ aliases {
+ serial0 = &uartlite;
+ spi0 = &spi0;
+ };
+
+ chosen {
+ stdout-path = &uartlite;
+ };
+};
+
+&uartlite {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pin_state {
+ pleds {
+ groups = "ephy led", "wled";
+ function = "led";
+ };
+
+ gpios {
+ groups = "uartf";
+ function = "gpio";
+ };
+ };
+
+ gsw_pins: gsw_pins {
+ mdio {
+ groups = "mdio";
+ function = "mdio";
+ };
+
+ rgmii1 {
+ groups = "rgmii1";
+ function = "rgmii1";
+ };
+
+ rgmii2 {
+ groups = "rgmii2";
+ function = "rgmii2";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <2>;
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ };
+};
+
+ð {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsw_pins>;
+
+ port4 {
+ phy-mode = "rgmii";
+ phy-addr = <4>;
+ };
+
+ port5 {
+ phy-mode = "rgmii";
+ phy-addr = <5>;
+ };
+};
+
+&mmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+
+ status = "okay";
+};
diff --git a/arch/mips/mach-mtmips/mt7620/Kconfig b/arch/mips/mach-mtmips/mt7620/Kconfig
index aa7cf1d..5db83eb 100644
--- a/arch/mips/mach-mtmips/mt7620/Kconfig
+++ b/arch/mips/mach-mtmips/mt7620/Kconfig
@@ -7,6 +7,21 @@
choice
prompt "Board select"
+config BOARD_MT7620_RFB
+ bool "MediaTek MT7620 RFB"
+ help
+ The reference design of MT7620A (WS2120). The board has 64 MiB DDR2,
+ 8 MiB SPI-NOR flash, 1 built-in 6 port switch (two GE PHYs and five
+ FE PHYs,one port can be configured to use either FE PHY or GE PHY),
+ 1 UART, 1 USB host, 1 SDXC, 1 PCIe socket and JTAG pins.
+
+config BOARD_MT7620_MT7530_RFB
+ bool "MediaTek MT7620-MT7530 RFB"
+ help
+ The reference design of MT7620DA (MTKC712). The board has 64 MiB
+ intergrated DDR2 KGD, 16 MiB SPI-NOR flash, an external 5-port giga
+ switch MT7530 and 1 UART.
+
endchoice
choice
@@ -51,4 +66,6 @@
default 6 if CPU_FREQ_600MHZ
default 7 if CPU_FREQ_620MHZ
+source "board/mediatek/mt7620/Kconfig"
+
endif