Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
This converts the following to Kconfig:
CONFIG_SYS_DV_CLKMODE
CONFIG_SYS_DA850_PLL0_POSTDIV
CONFIG_SYS_DA850_PLL0_PLLDIV1
CONFIG_SYS_DA850_PLL0_PLLDIV2
CONFIG_SYS_DA850_PLL0_PLLDIV3
CONFIG_SYS_DA850_PLL0_PLLDIV4
CONFIG_SYS_DA850_PLL0_PLLDIV5
CONFIG_SYS_DA850_PLL0_PLLDIV6
CONFIG_SYS_DA850_PLL0_PLLDIV7
CONFIG_SYS_DA850_PLL1_POSTDIV
CONFIG_SYS_DA850_PLL1_PLLDIV1
CONFIG_SYS_DA850_PLL1_PLLDIV2
CONFIG_SYS_DA850_PLL1_PLLDIV3
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 51a70e0..7b05b17 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -24,7 +24,7 @@
config TARGET_OMAPL138_LCDK
bool "OMAPL138 LCDK"
- select SOC_DA8XX
+ select SOC_DA850
select SUPPORT_SPL
config TARGET_CALIMAIN
@@ -63,6 +63,89 @@
config MACH_DAVINCI_DA850_EVM
bool
+if SYS_DA850_PLL_INIT
+comment "DA850 PLL Initialization Parameters"
+
+config SYS_DV_CLKMODE
+ int "PLLCTL Clock Mode"
+ default 0 if SOC_DA850
+ help
+ Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator
+
+config SYS_DA850_PLL0_POSTDIV
+ int "PLLC0 PLL Post-Divider"
+ default 1 if SOC_DA850
+ help
+ Value written to PLLC0 PLL Post-Divider Control Register
+
+config SYS_DA850_PLL0_PLLDIV1
+ hex "PLLC0 Divider 1"
+ default 0x8000 if SOC_DA850
+ help
+ Value written to PLLC0 Divider 1 register
+
+config SYS_DA850_PLL0_PLLDIV2
+ hex "PLLC0 Divider 2"
+ default 0x8001 if SOC_DA850
+ help
+ Value written to PLLC0 Divider 2 register
+
+config SYS_DA850_PLL0_PLLDIV3
+ hex "PLLC0 Divider 3"
+ default 0x8002 if SOC_DA850
+ help
+ Value written to PLLC0 Divider 3 register
+
+config SYS_DA850_PLL0_PLLDIV4
+ hex "PLLC0 Divider 4"
+ default 0x8003 if SOC_DA850
+ help
+ Value written to PLLC0 Divider 4 register
+
+config SYS_DA850_PLL0_PLLDIV5
+ hex "PLLC0 Divider 5"
+ default 0x8002 if SOC_DA850
+ help
+ Value written to PLLC0 Divider 5 register
+
+config SYS_DA850_PLL0_PLLDIV6
+ hex "PLLC0 Divider 6"
+ default 0x8000 if SOC_DA850
+ help
+ Value written to PLLC0 Divider 6 register
+
+config SYS_DA850_PLL0_PLLDIV7
+ hex "PLLC0 Divider 7"
+ default 0x8005 if SOC_DA850
+ help
+ Value written to PLLC0 Divider 7 register
+
+config SYS_DA850_PLL1_POSTDIV
+ hex "PLLC1 PLL Post-Divider"
+ default 1 if SOC_DA850
+ help
+ Value written to PLLC1 PLL Post-Divider Control Register
+
+config SYS_DA850_PLL1_PLLDIV1
+ hex "PLLC1 Divider 2"
+ default 0x8000 if SOC_DA850
+ help
+ Value written to PLLC1 Divider 1 register
+
+config SYS_DA850_PLL1_PLLDIV2
+ hex "PLLC1 Divider 2"
+ default 0x8001 if SOC_DA850
+ help
+ Value written to PLLC1 Divider 2 register
+
+config SYS_DA850_PLL1_PLLDIV3
+ hex "PLLC1 Divider 3"
+ default 0x8002 if SOC_DA850
+ help
+ Value written to PLLC1 Divider 3 register
+
+endif
+
source "board/Barix/ipam390/Kconfig"
source "board/davinci/da8xxevm/Kconfig"
source "board/davinci/ea20/Kconfig"