clk: k210: Move soc_clk_dump function
Move clock dump function to avoid forward declaration after switching to
dump in clk_ops.
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Link: https://lore.kernel.org/r/20231109105516.24892-4-ivprusov@sberdevices.ru
diff --git a/drivers/clk/clk_k210.c b/drivers/clk/clk_k210.c
index b9469b9..57f675b 100644
--- a/drivers/clk/clk_k210.c
+++ b/drivers/clk/clk_k210.c
@@ -1239,52 +1239,6 @@
return 0;
}
-static const struct clk_ops k210_clk_ops = {
- .request = k210_clk_request,
- .set_rate = k210_clk_set_rate,
- .get_rate = k210_clk_get_rate,
- .set_parent = k210_clk_set_parent,
- .enable = k210_clk_enable,
- .disable = k210_clk_disable,
-};
-
-static int k210_clk_probe(struct udevice *dev)
-{
- int ret;
- struct k210_clk_priv *priv = dev_get_priv(dev);
-
- priv->base = dev_read_addr_ptr(dev_get_parent(dev));
- if (!priv->base)
- return -EINVAL;
-
- ret = clk_get_by_index(dev, 0, &priv->in0);
- if (ret)
- return ret;
-
- /*
- * Force setting defaults, even before relocation. This is so we can
- * set the clock rate for PLL1 before we relocate into aisram.
- */
- if (!(gd->flags & GD_FLG_RELOC))
- clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
-
- return 0;
-}
-
-static const struct udevice_id k210_clk_ids[] = {
- { .compatible = "canaan,k210-clk" },
- { },
-};
-
-U_BOOT_DRIVER(k210_clk) = {
- .name = "k210_clk",
- .id = UCLASS_CLK,
- .of_match = k210_clk_ids,
- .ops = &k210_clk_ops,
- .probe = k210_clk_probe,
- .priv_auto = sizeof(struct k210_clk_priv),
-};
-
#if IS_ENABLED(CONFIG_CMD_CLK)
static char show_enabled(struct k210_clk_priv *priv, int id)
{
@@ -1343,3 +1297,49 @@
return 0;
}
#endif
+
+static const struct clk_ops k210_clk_ops = {
+ .request = k210_clk_request,
+ .set_rate = k210_clk_set_rate,
+ .get_rate = k210_clk_get_rate,
+ .set_parent = k210_clk_set_parent,
+ .enable = k210_clk_enable,
+ .disable = k210_clk_disable,
+};
+
+static int k210_clk_probe(struct udevice *dev)
+{
+ int ret;
+ struct k210_clk_priv *priv = dev_get_priv(dev);
+
+ priv->base = dev_read_addr_ptr(dev_get_parent(dev));
+ if (!priv->base)
+ return -EINVAL;
+
+ ret = clk_get_by_index(dev, 0, &priv->in0);
+ if (ret)
+ return ret;
+
+ /*
+ * Force setting defaults, even before relocation. This is so we can
+ * set the clock rate for PLL1 before we relocate into aisram.
+ */
+ if (!(gd->flags & GD_FLG_RELOC))
+ clk_set_defaults(dev, CLK_DEFAULTS_POST_FORCE);
+
+ return 0;
+}
+
+static const struct udevice_id k210_clk_ids[] = {
+ { .compatible = "canaan,k210-clk" },
+ { },
+};
+
+U_BOOT_DRIVER(k210_clk) = {
+ .name = "k210_clk",
+ .id = UCLASS_CLK,
+ .of_match = k210_clk_ids,
+ .ops = &k210_clk_ops,
+ .probe = k210_clk_probe,
+ .priv_auto = sizeof(struct k210_clk_priv),
+};