zynq: Move zynq to clock framework
Move the zynq to clock framework and remove unused functions as well as
the CONFIG_ZYNQ_PS_CLK_FREQ configuration.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0229800..9b3869c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -714,6 +714,9 @@
select SPL_SEPARATE_BSS if SPL
select DM_USB if USB
select BLK
+ select CLK
+ select SPL_CLK
+ select CLK_ZYNQ
config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index fa9ee27..34fc6e5 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -248,12 +248,14 @@
};
slcr: slcr@f8000000 {
+ u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
reg = <0xF8000000 0x1000>;
ranges;
clkc: clkc@100 {
+ u-boot,dm-pre-reloc;
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
fclk-enable = <0>;
diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c
index 570ebd7..1369cd0 100644
--- a/arch/arm/mach-zynq/clk.c
+++ b/arch/arm/mach-zynq/clk.c
@@ -4,77 +4,13 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
+#include <clk.h>
#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <dm.h>
#include <asm/arch/clk.h>
-/* Board oscillator frequency */
-#ifndef CONFIG_ZYNQ_PS_CLK_FREQ
-# define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL
-#endif
-
-/* Register bitfield defines */
-#define PLLCTRL_FBDIV_MASK 0x7f000
-#define PLLCTRL_FBDIV_SHIFT 12
-#define PLLCTRL_BPFORCE_MASK (1 << 4)
-#define PLLCTRL_PWRDWN_MASK 2
-#define PLLCTRL_PWRDWN_SHIFT 1
-#define PLLCTRL_RESET_MASK 1
-#define PLLCTRL_RESET_SHIFT 0
-
-#define ZYNQ_CLK_MAXDIV 0x3f
-#define CLK_CTRL_DIV1_SHIFT 20
-#define CLK_CTRL_DIV1_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
-#define CLK_CTRL_DIV0_SHIFT 8
-#define CLK_CTRL_DIV0_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
-#define CLK_CTRL_SRCSEL_SHIFT 4
-#define CLK_CTRL_SRCSEL_MASK (0x3 << CLK_CTRL_SRCSEL_SHIFT)
-
-#define CLK_CTRL_DIV2X_SHIFT 26
-#define CLK_CTRL_DIV2X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT)
-#define CLK_CTRL_DIV3X_SHIFT 20
-#define CLK_CTRL_DIV3X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT)
-
-#define ZYNQ_CLKMUX_SEL_0 0
-#define ZYNQ_CLKMUX_SEL_1 1
-#define ZYNQ_CLKMUX_SEL_2 2
-#define ZYNQ_CLKMUX_SEL_3 3
-
DECLARE_GLOBAL_DATA_PTR;
-struct clk;
-
-/**
- * struct zynq_clk_ops:
- * @set_rate: Function pointer to set_rate() implementation
- * @get_rate: Function pointer to get_rate() implementation
- */
-struct zynq_clk_ops {
- int (*set_rate)(struct clk *clk, unsigned long rate);
- unsigned long (*get_rate)(struct clk *clk);
-};
-
-/**
- * struct clk:
- * @frequency: Currenct frequency
- * @parent: Parent clock
- * @flags: Clock flags
- * @reg: Clock control register
- * @ops: Clock operations
- */
-struct clk {
- unsigned long frequency;
- enum zynq_clk parent;
- unsigned int flags;
- u32 *reg;
- struct zynq_clk_ops ops;
-};
-#define ZYNQ_CLK_FLAGS_HAS_2_DIVS 1
-
-static struct clk clks[clk_max];
-
static const char * const clk_names[clk_max] = {
"armpll", "ddrpll", "iopll",
"cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x",
@@ -90,548 +26,43 @@
};
/**
- * __zynq_clk_cpu_get_parent() - Decode clock multiplexer
- * @srcsel: Mux select value
- * Returns the clock identifier associated with the selected mux input.
- */
-static int __zynq_clk_cpu_get_parent(unsigned int srcsel)
-{
- unsigned int ret;
-
- switch (srcsel) {
- case ZYNQ_CLKMUX_SEL_0:
- case ZYNQ_CLKMUX_SEL_1:
- ret = armpll_clk;
- break;
- case ZYNQ_CLKMUX_SEL_2:
- ret = ddrpll_clk;
- break;
- case ZYNQ_CLKMUX_SEL_3:
- ret = iopll_clk;
- break;
- default:
- ret = armpll_clk;
- break;
- }
-
- return ret;
-}
-
-/**
- * ddr2x_get_rate() - Get clock rate of DDR2x clock
- * @clk: Clock handle
- * Returns the current clock rate of @clk.
- */
-static unsigned long ddr2x_get_rate(struct clk *clk)
-{
- u32 clk_ctrl = readl(clk->reg);
- u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
-
- return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
-}
-
-/**
- * ddr3x_get_rate() - Get clock rate of DDR3x clock
- * @clk: Clock handle
- * Returns the current clock rate of @clk.
- */
-static unsigned long ddr3x_get_rate(struct clk *clk)
-{
- u32 clk_ctrl = readl(clk->reg);
- u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
-
- return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
-}
-
-static void init_ddr_clocks(void)
-{
- u32 div0, div1;
- unsigned long prate = zynq_clk_get_rate(ddrpll_clk);
- u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
-
- /* DDR2x */
- clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl;
- clks[ddr2x_clk].parent = ddrpll_clk;
- clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]);
- clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate;
-
- /* DDR3x */
- clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl;
- clks[ddr3x_clk].parent = ddrpll_clk;
- clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]);
- clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate;
-
- /* DCI */
- clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
- div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
- div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
- clks[dci_clk].reg = &slcr_base->dci_clk_ctrl;
- clks[dci_clk].parent = ddrpll_clk;
- clks[dci_clk].frequency = DIV_ROUND_CLOSEST(
- DIV_ROUND_CLOSEST(prate, div0), div1);
-
- gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000;
-}
-
-static void init_cpu_clocks(void)
-{
- int clk_621;
- u32 reg, div, srcsel;
- enum zynq_clk parent;
-
- reg = readl(&slcr_base->arm_clk_ctrl);
- clk_621 = readl(&slcr_base->clk_621_true) & 1;
- div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
- srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
- parent = __zynq_clk_cpu_get_parent(srcsel);
-
- /* cpu clocks */
- clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl;
- clks[cpu_6or4x_clk].parent = parent;
- clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST(
- zynq_clk_get_rate(parent), div);
-
- clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl;
- clks[cpu_3or2x_clk].parent = cpu_6or4x_clk;
- clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2;
-
- clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl;
- clks[cpu_2x_clk].parent = cpu_6or4x_clk;
- clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
- (2 + clk_621);
-
- clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl;
- clks[cpu_1x_clk].parent = cpu_6or4x_clk;
- clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
- (4 + 2 * clk_621);
-}
-
-/**
- * periph_calc_two_divs() - Calculate clock dividers
- * @cur_rate: Current clock rate
- * @tgt_rate: Target clock rate
- * @prate: Parent clock rate
- * @div0: First divider (output)
- * @div1: Second divider (output)
- * Returns the actual clock rate possible.
- *
- * Calculates clock dividers for clocks with two 6-bit dividers.
- */
-static unsigned long periph_calc_two_divs(unsigned long cur_rate,
- unsigned long tgt_rate, unsigned long prate, u32 *div0,
- u32 *div1)
-{
- long err, best_err = (long)(~0UL >> 1);
- unsigned long rate, best_rate = 0;
- u32 d0, d1;
-
- for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
- for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
- rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0),
- d1);
- err = abs(rate - tgt_rate);
-
- if (err < best_err) {
- *div0 = d0;
- *div1 = d1;
- best_err = err;
- best_rate = rate;
- }
- }
- }
-
- return best_rate;
-}
-
-/**
- * zynq_clk_periph_set_rate() - Set clock rate
- * @clk: Handle of the peripheral clock
- * @rate: New clock rate
- * Sets the clock frequency of @clk to @rate. Returns zero on success.
- */
-static int zynq_clk_periph_set_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 ctrl, div0 = 0, div1 = 0;
- unsigned long prate, new_rate, cur_rate = clk->frequency;
-
- ctrl = readl(clk->reg);
- prate = zynq_clk_get_rate(clk->parent);
- ctrl &= ~CLK_CTRL_DIV0_MASK;
-
- if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) {
- ctrl &= ~CLK_CTRL_DIV1_MASK;
- new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0,
- &div1);
- ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
- } else {
- div0 = DIV_ROUND_CLOSEST(prate, rate);
- div0 &= ZYNQ_CLK_MAXDIV;
- new_rate = DIV_ROUND_CLOSEST(rate, div0);
- }
-
- /* write new divs to hardware */
- ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
- writel(ctrl, clk->reg);
-
- /* update frequency in clk framework */
- clk->frequency = new_rate;
-
- return 0;
-}
-
-/**
- * zynq_clk_periph_get_rate() - Get clock rate
- * @clk: Handle of the peripheral clock
- * Returns the current clock rate of @clk.
- */
-static unsigned long zynq_clk_periph_get_rate(struct clk *clk)
-{
- u32 clk_ctrl = readl(clk->reg);
- u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
- u32 div1 = 1;
-
- if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS)
- div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
-
- /* a register value of zero == division by 1 */
- if (!div0)
- div0 = 1;
- if (!div1)
- div1 = 1;
-
- return
- DIV_ROUND_CLOSEST(
- DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0),
- div1);
-}
-
-/**
- * __zynq_clk_periph_get_parent() - Decode clock multiplexer
- * @srcsel: Mux select value
- * Returns the clock identifier associated with the selected mux input.
- */
-static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel)
-{
- switch (srcsel) {
- case ZYNQ_CLKMUX_SEL_0:
- case ZYNQ_CLKMUX_SEL_1:
- return iopll_clk;
- case ZYNQ_CLKMUX_SEL_2:
- return armpll_clk;
- case ZYNQ_CLKMUX_SEL_3:
- return ddrpll_clk;
- default:
- return 0;
- }
-}
-
-/**
- * zynq_clk_periph_get_parent() - Decode clock multiplexer
- * @clk: Clock handle
- * Returns the clock identifier associated with the selected mux input.
- */
-static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk)
-{
- u32 clk_ctrl = readl(clk->reg);
- u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-
- return __zynq_clk_periph_get_parent(srcsel);
-}
-
-/**
- * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework
- * @clk: Pointer to struct clk for the clock
- * @ctrl: Clock control register
- * @two_divs: Indicates whether the clock features one or two dividers
- */
-static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl,
- bool two_divs)
-{
- clk->reg = ctrl;
- if (two_divs)
- clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS;
- clk->parent = zynq_clk_periph_get_parent(clk);
- clk->frequency = zynq_clk_periph_get_rate(clk);
- clk->ops.get_rate = zynq_clk_periph_get_rate;
- clk->ops.set_rate = zynq_clk_periph_set_rate;
-
- return 0;
-}
-
-static void init_periph_clocks(void)
-{
- zynq_clk_register_periph_clk(&clks[gem0_clk],
- &slcr_base->gem0_clk_ctrl, 1);
- zynq_clk_register_periph_clk(&clks[gem1_clk],
- &slcr_base->gem1_clk_ctrl, 1);
-
- zynq_clk_register_periph_clk(&clks[smc_clk],
- &slcr_base->smc_clk_ctrl, 0);
-
- zynq_clk_register_periph_clk(&clks[lqspi_clk],
- &slcr_base->lqspi_clk_ctrl, 0);
-
- zynq_clk_register_periph_clk(&clks[sdio0_clk],
- &slcr_base->sdio_clk_ctrl, 0);
- zynq_clk_register_periph_clk(&clks[sdio1_clk],
- &slcr_base->sdio_clk_ctrl, 0);
-
- zynq_clk_register_periph_clk(&clks[spi0_clk],
- &slcr_base->spi_clk_ctrl, 0);
- zynq_clk_register_periph_clk(&clks[spi1_clk],
- &slcr_base->spi_clk_ctrl, 0);
-
- zynq_clk_register_periph_clk(&clks[uart0_clk],
- &slcr_base->uart_clk_ctrl, 0);
- zynq_clk_register_periph_clk(&clks[uart1_clk],
- &slcr_base->uart_clk_ctrl, 0);
-
- zynq_clk_register_periph_clk(&clks[dbg_trc_clk],
- &slcr_base->dbg_clk_ctrl, 0);
- zynq_clk_register_periph_clk(&clks[dbg_apb_clk],
- &slcr_base->dbg_clk_ctrl, 0);
-
- zynq_clk_register_periph_clk(&clks[pcap_clk],
- &slcr_base->pcap_clk_ctrl, 0);
-
- zynq_clk_register_periph_clk(&clks[fclk0_clk],
- &slcr_base->fpga0_clk_ctrl, 1);
- zynq_clk_register_periph_clk(&clks[fclk1_clk],
- &slcr_base->fpga1_clk_ctrl, 1);
- zynq_clk_register_periph_clk(&clks[fclk2_clk],
- &slcr_base->fpga2_clk_ctrl, 1);
- zynq_clk_register_periph_clk(&clks[fclk3_clk],
- &slcr_base->fpga3_clk_ctrl, 1);
-}
-
-/**
- * zynq_clk_register_aper_clk() - Set up a APER clock with the framework
- * @clk: Pointer to struct clk for the clock
- * @ctrl: Clock control register
- */
-static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl)
-{
- clk->reg = ctrl;
- clk->parent = cpu_1x_clk;
- clk->frequency = zynq_clk_get_rate(clk->parent);
-}
-
-static void init_aper_clocks(void)
-{
- zynq_clk_register_aper_clk(&clks[usb0_aper_clk],
- &slcr_base->aper_clk_ctrl);
- zynq_clk_register_aper_clk(&clks[usb1_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[gem0_aper_clk],
- &slcr_base->aper_clk_ctrl);
- zynq_clk_register_aper_clk(&clks[gem1_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[sdio0_aper_clk],
- &slcr_base->aper_clk_ctrl);
- zynq_clk_register_aper_clk(&clks[sdio1_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[spi0_aper_clk],
- &slcr_base->aper_clk_ctrl);
- zynq_clk_register_aper_clk(&clks[spi1_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[can0_aper_clk],
- &slcr_base->aper_clk_ctrl);
- zynq_clk_register_aper_clk(&clks[can1_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[i2c0_aper_clk],
- &slcr_base->aper_clk_ctrl);
- zynq_clk_register_aper_clk(&clks[i2c1_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[uart0_aper_clk],
- &slcr_base->aper_clk_ctrl);
- zynq_clk_register_aper_clk(&clks[uart1_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[gpio_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[lqspi_aper_clk],
- &slcr_base->aper_clk_ctrl);
-
- zynq_clk_register_aper_clk(&clks[smc_aper_clk],
- &slcr_base->aper_clk_ctrl);
-}
-
-/**
- * __zynq_clk_pll_get_rate() - Get PLL rate
- * @addr: Address of the PLL's control register
- * Returns the current PLL output rate.
- */
-static unsigned long __zynq_clk_pll_get_rate(u32 *addr)
-{
- u32 reg, mul, bypass;
-
- reg = readl(addr);
- bypass = reg & PLLCTRL_BPFORCE_MASK;
- if (bypass)
- mul = 1;
- else
- mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
-
- return CONFIG_ZYNQ_PS_CLK_FREQ * mul;
-}
-
-/**
- * zynq_clk_pll_get_rate() - Get PLL rate
- * @pll: Handle of the PLL
- * Returns the current clock rate of @pll.
- */
-static unsigned long zynq_clk_pll_get_rate(struct clk *pll)
-{
- return __zynq_clk_pll_get_rate(pll->reg);
-}
-
-/**
- * zynq_clk_register_pll() - Set up a PLL with the framework
- * @clk: Pointer to struct clk for the PLL
- * @ctrl: PLL control register
- * @prate: PLL input clock rate
- */
-static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl,
- unsigned long prate)
-{
- clk->reg = ctrl;
- clk->frequency = zynq_clk_pll_get_rate(clk);
- clk->ops.get_rate = zynq_clk_pll_get_rate;
-}
-
-/**
- * clkid_2_register() - Get clock control register
- * @id: Clock identifier of one of the PLLs
- * Returns the address of the requested PLL's control register.
- */
-static u32 *clkid_2_register(enum zynq_clk id)
-{
- switch (id) {
- case armpll_clk:
- return &slcr_base->arm_pll_ctrl;
- case ddrpll_clk:
- return &slcr_base->ddr_pll_ctrl;
- case iopll_clk:
- return &slcr_base->io_pll_ctrl;
- default:
- return &slcr_base->io_pll_ctrl;
- }
-}
-
-/* API */
-/**
- * zynq_clk_early_init() - Early init for the clock framework
- *
- * This function is called from before relocation and sets up the CPU clock
- * frequency in the global data struct.
- */
-void zynq_clk_early_init(void)
-{
- u32 reg = readl(&slcr_base->arm_clk_ctrl);
- u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
- u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
- enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel);
- u32 *pllreg = clkid_2_register(parent);
- unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
-
- if (!div)
- div = 1;
-
- gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div);
-}
-
-/**
- * get_uart_clk() - Get UART input frequency
- * @dev_index: UART ID
- * Returns UART input clock frequency in Hz.
- *
- * Compared to zynq_clk_get_rate() this function is designed to work before
- * relocation and can be called when the serial UART is set up.
- */
-unsigned long get_uart_clk(int dev_index)
-{
- u32 reg = readl(&slcr_base->uart_clk_ctrl);
- u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
- u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
- enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel);
- u32 *pllreg = clkid_2_register(parent);
- unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
-
- if (!div)
- div = 1;
-
- return DIV_ROUND_CLOSEST(prate, div);
-}
-
-/**
- * set_cpu_clk_info() - Initialize clock framework
- * Always returns zero.
+ * set_cpu_clk_info() - Setup clock information
*
* This function is called from common code after relocation and sets up the
- * clock framework. The framework must not be used before this function had been
- * called.
+ * clock information.
*/
int set_cpu_clk_info(void)
{
- zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl,
- CONFIG_ZYNQ_PS_CLK_FREQ);
- zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl,
- CONFIG_ZYNQ_PS_CLK_FREQ);
- zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl,
- CONFIG_ZYNQ_PS_CLK_FREQ);
+ struct clk clk;
+ struct udevice *dev;
+ ulong rate;
+ int i, ret;
- init_ddr_clocks();
- init_cpu_clocks();
- init_periph_clocks();
- init_aper_clocks();
+ ret = uclass_get_device_by_driver(UCLASS_CLK,
+ DM_GET_DRIVER(zynq_clk), &dev);
+ if (ret)
+ return ret;
- gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+ for (i = 0; i < 2; i++) {
+ clk.id = i ? ddr3x_clk : cpu_6or4x_clk;
+ ret = clk_request(dev, &clk);
+ if (ret < 0)
+ return ret;
+
+ rate = clk_get_rate(&clk) / 1000000;
+ if (i)
+ gd->bd->bi_ddr_freq = rate;
+ else
+ gd->bd->bi_arm_freq = rate;
+
+ clk_free(&clk);
+ }
gd->bd->bi_dsp_freq = 0;
return 0;
}
/**
- * zynq_clk_get_rate() - Get clock rate
- * @clk: Clock identifier
- * Returns the current clock rate of @clk on success or zero for an invalid
- * clock id.
- */
-unsigned long zynq_clk_get_rate(enum zynq_clk clk)
-{
- if (clk < 0 || clk >= clk_max)
- return 0;
-
- return clks[clk].frequency;
-}
-
-/**
- * zynq_clk_set_rate() - Set clock rate
- * @clk: Clock identifier
- * @rate: Requested clock rate
- * Passes on the return value from the clock's set_rate() function or negative
- * errno.
- */
-int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate)
-{
- if (clk < 0 || clk >= clk_max)
- return -ENODEV;
-
- if (clks[clk].ops.set_rate)
- return clks[clk].ops.set_rate(&clks[clk], rate);
-
- return -ENXIO;
-}
-
-/**
* soc_clk_dump() - Print clock frequencies
* Returns zero on success
*
@@ -639,13 +70,35 @@
*/
int soc_clk_dump(void)
{
- int i;
+ struct udevice *dev;
+ int i, ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_CLK,
+ DM_GET_DRIVER(zynq_clk), &dev);
+ if (ret)
+ return ret;
printf("clk\t\tfrequency\n");
for (i = 0; i < clk_max; i++) {
const char *name = clk_names[i];
- if (name)
- printf("%10s%20lu\n", name, zynq_clk_get_rate(i));
+ if (name) {
+ struct clk clk;
+ unsigned long rate;
+
+ clk.id = i;
+ ret = clk_request(dev, &clk);
+ if (ret < 0)
+ return ret;
+
+ rate = clk_get_rate(&clk);
+
+ clk_free(&clk);
+
+ if (rate == (unsigned long)-ENOSYS)
+ printf("%10s%20s\n", name, "unknown");
+ else
+ printf("%10s%20lu\n", name, rate);
+ }
}
return 0;
diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c
index ba9171e..ee1c1a9 100644
--- a/arch/arm/mach-zynq/cpu.c
+++ b/arch/arm/mach-zynq/cpu.c
@@ -35,7 +35,6 @@
writel(0xC, &slcr_base->ddr_urgent);
#endif
#endif
- zynq_clk_early_init();
zynq_slcr_lock();
return 0;
diff --git a/arch/arm/mach-zynq/include/mach/clk.h b/arch/arm/mach-zynq/include/mach/clk.h
index 5c2758a..8a039ae 100644
--- a/arch/arm/mach-zynq/include/mach/clk.h
+++ b/arch/arm/mach-zynq/include/mach/clk.h
@@ -20,9 +20,4 @@
uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk,
smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
-void zynq_clk_early_init(void);
-int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate);
-unsigned long zynq_clk_get_rate(enum zynq_clk clk);
-unsigned long get_uart_clk(int dev_id);
-
#endif
diff --git a/arch/arm/mach-zynq/include/mach/sys_proto.h b/arch/arm/mach-zynq/include/mach/sys_proto.h
index 44c9b50..67238e7 100644
--- a/arch/arm/mach-zynq/include/mach/sys_proto.h
+++ b/arch/arm/mach-zynq/include/mach/sys_proto.h
@@ -10,7 +10,6 @@
extern void zynq_slcr_lock(void);
extern void zynq_slcr_unlock(void);
extern void zynq_slcr_cpu_reset(void);
-extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate);
extern void zynq_slcr_devcfg_disable(void);
extern void zynq_slcr_devcfg_enable(void);
extern u32 zynq_slcr_get_boot_mode(void);
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index c1129cd..2a207ae 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -9,7 +9,6 @@
#include <malloc.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/clk.h>
#define SLCR_LOCK_MAGIC 0x767B
#define SLCR_UNLOCK_MAGIC 0xDF0D
@@ -124,27 +123,6 @@
writel(1, &slcr_base->pss_rst_ctrl);
}
-/* Setup clk for network */
-void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
-{
- int ret;
-
- zynq_slcr_unlock();
-
- if (gem_id > 1) {
- printf("Non existing GEM id %d\n", gem_id);
- goto out;
- }
-
- ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
- if (ret)
- goto out;
-
- udelay(100000);
-out:
- zynq_slcr_lock();
-}
-
void zynq_slcr_devcfg_disable(void)
{
u32 reg_val;
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index 0335cbe..b1bb3b8 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -61,7 +61,6 @@
(TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
SCUTIMER_CONTROL_ENABLE_MASK;
-#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK)
struct udevice *dev;
struct clk clk;
int ret;
@@ -79,7 +78,6 @@
gd->cpu_clk = clk_get_rate(&clk);
clk_free(&clk);
-#endif
gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);