| /* |
| * Copyright (c) 2001 William L. Pitts |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms are freely |
| * permitted provided that the above copyright notice and this |
| * paragraph and the following disclaimer are duplicated in all |
| * such forms. |
| * |
| * This software is provided "AS IS" and without any express or |
| * implied warranties, including, without limitation, the implied |
| * warranties of merchantability and fitness for a particular |
| * purpose. |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <elf.h> |
| #include <environment.h> |
| #include <net.h> |
| #include <vxworks.h> |
| #ifdef CONFIG_X86 |
| #include <vbe.h> |
| #include <asm/e820.h> |
| #include <linux/linkage.h> |
| #endif |
| |
| /* |
| * A very simple ELF64 loader, assumes the image is valid, returns the |
| * entry point address. |
| * |
| * Note if U-Boot is 32-bit, the loader assumes the to segment's |
| * physical address and size is within the lower 32-bit address space. |
| */ |
| static unsigned long load_elf64_image_phdr(unsigned long addr) |
| { |
| Elf64_Ehdr *ehdr; /* Elf header structure pointer */ |
| Elf64_Phdr *phdr; /* Program header structure pointer */ |
| int i; |
| |
| ehdr = (Elf64_Ehdr *)addr; |
| phdr = (Elf64_Phdr *)(addr + (ulong)ehdr->e_phoff); |
| |
| /* Load each program header */ |
| for (i = 0; i < ehdr->e_phnum; ++i) { |
| void *dst = (void *)(ulong)phdr->p_paddr; |
| void *src = (void *)addr + phdr->p_offset; |
| |
| debug("Loading phdr %i to 0x%p (%lu bytes)\n", |
| i, dst, (ulong)phdr->p_filesz); |
| if (phdr->p_filesz) |
| memcpy(dst, src, phdr->p_filesz); |
| if (phdr->p_filesz != phdr->p_memsz) |
| memset(dst + phdr->p_filesz, 0x00, |
| phdr->p_memsz - phdr->p_filesz); |
| flush_cache((unsigned long)dst, phdr->p_filesz); |
| ++phdr; |
| } |
| |
| return ehdr->e_entry; |
| } |
| |
| /* |
| * A very simple ELF loader, assumes the image is valid, returns the |
| * entry point address. |
| * |
| * The loader firstly reads the EFI class to see if it's a 64-bit image. |
| * If yes, call the ELF64 loader. Otherwise continue with the ELF32 loader. |
| */ |
| static unsigned long load_elf_image_phdr(unsigned long addr) |
| { |
| Elf32_Ehdr *ehdr; /* Elf header structure pointer */ |
| Elf32_Phdr *phdr; /* Program header structure pointer */ |
| int i; |
| |
| ehdr = (Elf32_Ehdr *)addr; |
| if (ehdr->e_ident[EI_CLASS] == ELFCLASS64) |
| return load_elf64_image_phdr(addr); |
| |
| phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff); |
| |
| /* Load each program header */ |
| for (i = 0; i < ehdr->e_phnum; ++i) { |
| void *dst = (void *)(uintptr_t)phdr->p_paddr; |
| void *src = (void *)addr + phdr->p_offset; |
| |
| debug("Loading phdr %i to 0x%p (%i bytes)\n", |
| i, dst, phdr->p_filesz); |
| if (phdr->p_filesz) |
| memcpy(dst, src, phdr->p_filesz); |
| if (phdr->p_filesz != phdr->p_memsz) |
| memset(dst + phdr->p_filesz, 0x00, |
| phdr->p_memsz - phdr->p_filesz); |
| flush_cache((unsigned long)dst, phdr->p_filesz); |
| ++phdr; |
| } |
| |
| return ehdr->e_entry; |
| } |
| |
| static unsigned long load_elf_image_shdr(unsigned long addr) |
| { |
| Elf32_Ehdr *ehdr; /* Elf header structure pointer */ |
| Elf32_Shdr *shdr; /* Section header structure pointer */ |
| unsigned char *strtab = 0; /* String table pointer */ |
| unsigned char *image; /* Binary image pointer */ |
| int i; /* Loop counter */ |
| |
| ehdr = (Elf32_Ehdr *)addr; |
| |
| /* Find the section header string table for output info */ |
| shdr = (Elf32_Shdr *)(addr + ehdr->e_shoff + |
| (ehdr->e_shstrndx * sizeof(Elf32_Shdr))); |
| |
| if (shdr->sh_type == SHT_STRTAB) |
| strtab = (unsigned char *)(addr + shdr->sh_offset); |
| |
| /* Load each appropriate section */ |
| for (i = 0; i < ehdr->e_shnum; ++i) { |
| shdr = (Elf32_Shdr *)(addr + ehdr->e_shoff + |
| (i * sizeof(Elf32_Shdr))); |
| |
| if (!(shdr->sh_flags & SHF_ALLOC) || |
| shdr->sh_addr == 0 || shdr->sh_size == 0) { |
| continue; |
| } |
| |
| if (strtab) { |
| debug("%sing %s @ 0x%08lx (%ld bytes)\n", |
| (shdr->sh_type == SHT_NOBITS) ? "Clear" : "Load", |
| &strtab[shdr->sh_name], |
| (unsigned long)shdr->sh_addr, |
| (long)shdr->sh_size); |
| } |
| |
| if (shdr->sh_type == SHT_NOBITS) { |
| memset((void *)(uintptr_t)shdr->sh_addr, 0, |
| shdr->sh_size); |
| } else { |
| image = (unsigned char *)addr + shdr->sh_offset; |
| memcpy((void *)(uintptr_t)shdr->sh_addr, |
| (const void *)image, shdr->sh_size); |
| } |
| flush_cache(shdr->sh_addr, shdr->sh_size); |
| } |
| |
| return ehdr->e_entry; |
| } |
| |
| /* Allow ports to override the default behavior */ |
| static unsigned long do_bootelf_exec(ulong (*entry)(int, char * const[]), |
| int argc, char * const argv[]) |
| { |
| unsigned long ret; |
| |
| /* |
| * pass address parameter as argv[0] (aka command name), |
| * and all remaining args |
| */ |
| ret = entry(argc, argv); |
| |
| return ret; |
| } |
| |
| /* |
| * Determine if a valid ELF image exists at the given memory location. |
| * First look at the ELF header magic field, then make sure that it is |
| * executable. |
| */ |
| int valid_elf_image(unsigned long addr) |
| { |
| Elf32_Ehdr *ehdr; /* Elf header structure pointer */ |
| |
| ehdr = (Elf32_Ehdr *)addr; |
| |
| if (!IS_ELF(*ehdr)) { |
| printf("## No elf image at address 0x%08lx\n", addr); |
| return 0; |
| } |
| |
| if (ehdr->e_type != ET_EXEC) { |
| printf("## Not a 32-bit elf image at address 0x%08lx\n", addr); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /* Interpreter command to boot an arbitrary ELF image from memory */ |
| int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| unsigned long addr; /* Address of the ELF image */ |
| unsigned long rc; /* Return value from user code */ |
| char *sload = NULL; |
| const char *ep = env_get("autostart"); |
| int rcode = 0; |
| |
| /* Consume 'bootelf' */ |
| argc--; argv++; |
| |
| /* Check for flag. */ |
| if (argc >= 1 && (argv[0][0] == '-' && \ |
| (argv[0][1] == 'p' || argv[0][1] == 's'))) { |
| sload = argv[0]; |
| /* Consume flag. */ |
| argc--; argv++; |
| } |
| /* Check for address. */ |
| if (argc >= 1 && strict_strtoul(argv[0], 16, &addr) != -EINVAL) { |
| /* Consume address */ |
| argc--; argv++; |
| } else |
| addr = load_addr; |
| |
| if (!valid_elf_image(addr)) |
| return 1; |
| |
| if (sload && sload[1] == 'p') |
| addr = load_elf_image_phdr(addr); |
| else |
| addr = load_elf_image_shdr(addr); |
| |
| if (ep && !strcmp(ep, "no")) |
| return rcode; |
| |
| printf("## Starting application at 0x%08lx ...\n", addr); |
| |
| /* |
| * pass address parameter as argv[0] (aka command name), |
| * and all remaining args |
| */ |
| rc = do_bootelf_exec((void *)addr, argc, argv); |
| if (rc != 0) |
| rcode = 1; |
| |
| printf("## Application terminated, rc = 0x%lx\n", rc); |
| |
| return rcode; |
| } |
| |
| /* |
| * Interpreter command to boot VxWorks from a memory image. The image can |
| * be either an ELF image or a raw binary. Will attempt to setup the |
| * bootline and other parameters correctly. |
| */ |
| int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| unsigned long addr; /* Address of image */ |
| unsigned long bootaddr; /* Address to put the bootline */ |
| char *bootline; /* Text of the bootline */ |
| char *tmp; /* Temporary char pointer */ |
| char build_buf[128]; /* Buffer for building the bootline */ |
| int ptr = 0; |
| #ifdef CONFIG_X86 |
| ulong base; |
| struct e820_info *info; |
| struct e820_entry *data; |
| struct efi_gop_info *gop; |
| struct vesa_mode_info *vesa = &mode_info.vesa; |
| #endif |
| |
| /* |
| * Check the loadaddr variable. |
| * If we don't know where the image is then we're done. |
| */ |
| if (argc < 2) |
| addr = load_addr; |
| else |
| addr = simple_strtoul(argv[1], NULL, 16); |
| |
| #if defined(CONFIG_CMD_NET) |
| /* |
| * Check to see if we need to tftp the image ourselves |
| * before starting |
| */ |
| if ((argc == 2) && (strcmp(argv[1], "tftp") == 0)) { |
| if (net_loop(TFTPGET) <= 0) |
| return 1; |
| printf("Automatic boot of VxWorks image at address 0x%08lx ...\n", |
| addr); |
| } |
| #endif |
| |
| /* |
| * This should equate to |
| * NV_RAM_ADRS + NV_BOOT_OFFSET + NV_ENET_OFFSET |
| * from the VxWorks BSP header files. |
| * This will vary from board to board |
| */ |
| #if defined(CONFIG_SYS_VXWORKS_MAC_PTR) |
| tmp = (char *)CONFIG_SYS_VXWORKS_MAC_PTR; |
| eth_env_get_enetaddr("ethaddr", (uchar *)build_buf); |
| memcpy(tmp, build_buf, 6); |
| #else |
| puts("## Ethernet MAC address not copied to NV RAM\n"); |
| #endif |
| |
| /* |
| * Use bootaddr to find the location in memory that VxWorks |
| * will look for the bootline string. The default value is |
| * (LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET) as defined by |
| * VxWorks BSP. For example, on PowerPC it defaults to 0x4200. |
| */ |
| tmp = env_get("bootaddr"); |
| if (!tmp) { |
| printf("## VxWorks bootline address not specified\n"); |
| } else { |
| bootaddr = simple_strtoul(tmp, NULL, 16); |
| |
| /* |
| * Check to see if the bootline is defined in the 'bootargs' |
| * parameter. If it is not defined, we may be able to |
| * construct the info. |
| */ |
| bootline = env_get("bootargs"); |
| if (!bootline) { |
| tmp = env_get("bootdev"); |
| if (tmp) { |
| strcpy(build_buf, tmp); |
| ptr = strlen(tmp); |
| } else |
| printf("## VxWorks boot device not specified\n"); |
| |
| tmp = env_get("bootfile"); |
| if (tmp) |
| ptr += sprintf(build_buf + ptr, |
| "host:%s ", tmp); |
| else |
| ptr += sprintf(build_buf + ptr, |
| "host:vxWorks "); |
| |
| /* |
| * The following parameters are only needed if 'bootdev' |
| * is an ethernet device, otherwise they are optional. |
| */ |
| tmp = env_get("ipaddr"); |
| if (tmp) { |
| ptr += sprintf(build_buf + ptr, "e=%s", tmp); |
| tmp = env_get("netmask"); |
| if (tmp) { |
| u32 mask = env_get_ip("netmask").s_addr; |
| ptr += sprintf(build_buf + ptr, |
| ":%08x ", ntohl(mask)); |
| } else { |
| ptr += sprintf(build_buf + ptr, " "); |
| } |
| } |
| |
| tmp = env_get("serverip"); |
| if (tmp) |
| ptr += sprintf(build_buf + ptr, "h=%s ", tmp); |
| |
| tmp = env_get("gatewayip"); |
| if (tmp) |
| ptr += sprintf(build_buf + ptr, "g=%s ", tmp); |
| |
| tmp = env_get("hostname"); |
| if (tmp) |
| ptr += sprintf(build_buf + ptr, "tn=%s ", tmp); |
| |
| tmp = env_get("othbootargs"); |
| if (tmp) { |
| strcpy(build_buf + ptr, tmp); |
| ptr += strlen(tmp); |
| } |
| |
| bootline = build_buf; |
| } |
| |
| memcpy((void *)bootaddr, bootline, |
| max(strlen(bootline), (size_t)255)); |
| flush_cache(bootaddr, max(strlen(bootline), (size_t)255)); |
| printf("## Using bootline (@ 0x%lx): %s\n", bootaddr, |
| (char *)bootaddr); |
| } |
| |
| #ifdef CONFIG_X86 |
| /* |
| * Get VxWorks's physical memory base address from environment, |
| * if we don't specify it in the environment, use a default one. |
| */ |
| base = env_get_hex("vx_phys_mem_base", VXWORKS_PHYS_MEM_BASE); |
| data = (struct e820_entry *)(base + E820_DATA_OFFSET); |
| info = (struct e820_info *)(base + E820_INFO_OFFSET); |
| |
| memset(info, 0, sizeof(struct e820_info)); |
| info->sign = E820_SIGNATURE; |
| info->entries = install_e820_map(E820MAX, data); |
| info->addr = (info->entries - 1) * sizeof(struct e820_entry) + |
| E820_DATA_OFFSET; |
| |
| /* |
| * Explicitly clear the bootloader image size otherwise if memory |
| * at this offset happens to contain some garbage data, the final |
| * available memory size for the kernel is insane. |
| */ |
| *(u32 *)(base + BOOT_IMAGE_SIZE_OFFSET) = 0; |
| |
| /* |
| * Prepare compatible framebuffer information block. |
| * The VESA mode has to be 32-bit RGBA. |
| */ |
| if (vesa->x_resolution && vesa->y_resolution) { |
| gop = (struct efi_gop_info *)(base + EFI_GOP_INFO_OFFSET); |
| gop->magic = EFI_GOP_INFO_MAGIC; |
| gop->info.version = 0; |
| gop->info.width = vesa->x_resolution; |
| gop->info.height = vesa->y_resolution; |
| gop->info.pixel_format = EFI_GOT_RGBA8; |
| gop->info.pixels_per_scanline = vesa->bytes_per_scanline / 4; |
| gop->fb_base = vesa->phys_base_ptr; |
| gop->fb_size = vesa->bytes_per_scanline * vesa->y_resolution; |
| } |
| #endif |
| |
| /* |
| * If the data at the load address is an elf image, then |
| * treat it like an elf image. Otherwise, assume that it is a |
| * binary image. |
| */ |
| if (valid_elf_image(addr)) |
| addr = load_elf_image_phdr(addr); |
| else |
| puts("## Not an ELF image, assuming binary\n"); |
| |
| printf("## Starting vxWorks at 0x%08lx ...\n", addr); |
| |
| dcache_disable(); |
| #if defined(CONFIG_ARM64) && defined(CONFIG_ARMV8_PSCI) |
| armv8_setup_psci(); |
| smp_kick_all_cpus(); |
| #endif |
| |
| #ifdef CONFIG_X86 |
| /* VxWorks on x86 uses stack to pass parameters */ |
| ((asmlinkage void (*)(int))addr)(0); |
| #else |
| ((void (*)(int))addr)(0); |
| #endif |
| |
| puts("## vxWorks terminated\n"); |
| |
| return 1; |
| } |
| |
| U_BOOT_CMD( |
| bootelf, CONFIG_SYS_MAXARGS, 0, do_bootelf, |
| "Boot from an ELF image in memory", |
| "[-p|-s] [address]\n" |
| "\t- load ELF image at [address] via program headers (-p)\n" |
| "\t or via section headers (-s)" |
| ); |
| |
| U_BOOT_CMD( |
| bootvx, 2, 0, do_bootvx, |
| "Boot vxWorks from an ELF image", |
| " [address] - load address of vxWorks ELF image." |
| ); |