* Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs.
* Patch by Marc Singer, 28 May 2003:
Added port I/O commands.
* Patch by Matthew McClintock, 28 May 2003
- cpu/mpc824x/start.S: fix relocation code when booting from RAM
- minor patches for utx8245
* Patch by Daniel Engström, 28 May 2003:
x86 update
* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
add nand flash support to SXNI855T configuration
fix/extend nand flash support:
- fix 'nand erase' command so does not erase bad blocks
- fix 'nand write' command so does not write to bad blocks
- fix nand_probe() so handles no flash detected properly
- add doc/README.nand
- add .jffs2 and .oob options to nand read/write
- add 'nand bad' command to list bad blocks
- add 'clean' option to 'nand erase' to write JFFS2 clean markers
- make NAND read/write faster
* Patch by Rune Torgersen, 23 May 2003:
Update for MPC8266ADS board
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
new file mode 100644
index 0000000..962e04e
--- /dev/null
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -0,0 +1,686 @@
+/*
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <ssi.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/ic/sc520.h>
+
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Theory:
+ * We first set up all IRQs to be non-pci, edge triggered,
+ * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets
+ * called we reallocate irqs to the pci bus with sc520_pci_set_irq()
+ * as needed. Whe choose the irqs to gram from a configurable list
+ * inside pci_sc520_fixup_irq() (If this list contains stupid irq's
+ * such as 0 thngas will not work)
+ */
+
+static void irq_init(void)
+{
+ /* disable global interrupt mode */
+ write_mmcr_byte(SC520_PICICR, 0x40);
+
+ /* set all irqs to edge */
+ write_mmcr_byte(SC520_MPICMODE, 0x00);
+ write_mmcr_byte(SC520_SL1PICMODE, 0x00);
+ write_mmcr_byte(SC520_SL2PICMODE, 0x00);
+
+ /* active low polarity on PIC interrupt pins,
+ * active high polarity on all other irq pins */
+ write_mmcr_word(SC520_INTPINPOL, 0x0000);
+
+ /* set irq number mapping */
+ write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */
+ write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */
+ write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */
+ write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */
+ write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */
+ write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */
+ write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */
+ write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */
+ write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */
+ write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */
+ write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */
+ write_mmcr_byte(SC520_SSIMAP, SC520_IRQ6); /* Set Synchronius serial INT to IRQ6*/
+ write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */
+ write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */
+ write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */
+ write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */
+ write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */
+
+ write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */
+ write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */
+
+ write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ7); /* Set GPIRQ0 (PC-Card AUX IRQ) to IRQ7 */
+ write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ14); /* Set GPIRQ1 (CF IRQ) to IRQ14 */
+ write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */
+ write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disbale GIRQ4 ( IRR IRQ ) */
+ write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ5 */
+ write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ6 */
+ write_mmcr_byte(SC520_GP7IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ7 */
+ write_mmcr_byte(SC520_GP8IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ8 */
+ write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ9 */
+ write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ2 */
+ write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */
+
+ write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */
+ write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */
+
+}
+
+
+/* PCI stuff */
+static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ /* a configurable lists of irqs to steal
+ * when we need one (a board with more pci interrupt pins
+ * would use a larger table */
+ static int irq_list[] = {
+ CFG_FIRST_PCI_IRQ,
+ CFG_SECOND_PCI_IRQ,
+ CFG_THIRD_PCI_IRQ,
+ CFG_FORTH_PCI_IRQ
+ };
+ static int next_irq_index=0;
+
+ char tmp_pin;
+ int pin;
+
+ pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
+ pin = tmp_pin;
+
+ pin-=1; /* pci config space use 1-based numbering */
+ if (-1 == pin) {
+ return; /* device use no irq */
+ }
+
+
+
+ /* map device number + pin to a pin on the sc520 */
+ switch (PCI_DEV(dev)) {
+ case 6: /* ETH0 */
+ pin+=SC520_PCI_INTA;
+ break;
+
+ case 7: /* ETH1 */
+ pin+=SC520_PCI_INTB;
+ break;
+
+ case 8: /* Crypto */
+ pin+=SC520_PCI_INTC;
+ break;
+
+ case 9: /* PMC slot */
+ pin+=SC520_PCI_INTD;
+ break;
+
+ case 10: /* PC-Card */
+
+ if (version < 10) {
+ pin+=SC520_PCI_INTD;
+ } else {
+ pin+=SC520_PCI_INTC;
+ }
+ break;
+
+ default:
+ return;
+ }
+
+ pin&=3; /* wrap around */
+
+ if (sc520_pci_ints[pin] == -1) {
+ /* re-route one interrupt for us */
+ if (next_irq_index > 3) {
+ return;
+ }
+ if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
+ return;
+ }
+ next_irq_index++;
+ }
+
+
+ if (-1 != sc520_pci_ints[pin]) {
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+ sc520_pci_ints[pin]);
+ }
+#if 0
+ printf("fixup_irq: device %d pin %c irq %d\n",
+ PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]);
+#endif
+}
+
+
+static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose,
+ pci_dev_t dev, struct pci_config_table *te)
+{
+ u32 io_base;
+ u32 temp;
+
+ pciauto_config_device(hose, dev);
+
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, 0x07); /* enable device */
+ pci_hose_write_config_byte(hose, dev, 0x0c, 0x10); /* cacheline size */
+ pci_hose_write_config_byte(hose, dev, 0x0d, 0x40); /* latency timer */
+ pci_hose_write_config_byte(hose, dev, 0x1b, 0x40); /* cardbus latency timer */
+ pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0040); /* reset cardbus */
+ pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0080); /* route interrupts though ExCA */
+ pci_hose_write_config_word(hose, dev, 0x44, 0x3e0); /* map legacy I/O port to 0x3e0 */
+
+ pci_hose_read_config_dword(hose, dev, 0x80, &temp); /* System control */
+ pci_hose_write_config_dword(hose, dev, 0x80, temp | 0x60); /* System control: disable clockrun */
+ /* route MF0 to ~INT and MF3 to IRQ7
+ * reserve all others */
+ pci_hose_write_config_dword(hose, dev, 0x8c, 0x00007002);
+ pci_hose_write_config_byte(hose, dev, 0x91, 0x00); /* card control */
+ pci_hose_write_config_byte(hose, dev, 0x92, 0x62); /* device control */
+
+ if (te->device != 0xac56) {
+ pci_hose_write_config_byte(hose, dev, 0x93, 0x21); /* async interrupt enable */
+ pci_hose_write_config_word(hose, dev, 0xa8, 0x0000); /* reset GPIO */
+ pci_hose_write_config_word(hose, dev, 0xac, 0x0000); /* reset GPIO */
+ pci_hose_write_config_word(hose, dev, 0xaa, 0x0000); /* reset GPIO */
+ pci_hose_write_config_word(hose, dev, 0xae, 0x0000); /* reset GPIO */
+ } else {
+ pci_hose_write_config_byte(hose, dev, 0x93, 0x20); /* */
+ }
+ pci_hose_write_config_word(hose, dev, 0xa4, 0x8000); /* reset power management */
+
+
+ pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &io_base);
+ io_base &= ~0xfL;
+
+ writeb(0x07, io_base+0x803); /* route CSC irq though ExCA and enable IRQ7 */
+ writel(0, io_base+0x10); /* CLKRUN default */
+ writel(0, io_base+0x20); /* CLKRUN default */
+
+}
+
+
+
+static struct pci_config_table pci_sc520_spunk_config_table[] = {
+ { 0x104c, 0xac50, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} },
+ { 0x104c, 0xac56, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} },
+ { 0, 0, 0, 0, 0, 0, NULL, {0,0,0}}
+};
+
+static struct pci_controller sc520_spunk_hose = {
+ fixup_irq: pci_sc520_spunk_fixup_irq,
+ config_table: pci_sc520_spunk_config_table,
+ first_busno: 0x00,
+ last_busno: 0xff,
+};
+
+void pci_init_board(void)
+{
+ pci_sc520_init(&sc520_spunk_hose);
+}
+
+
+/* set up the ISA bus timing and system address mappings */
+static void bus_init(void)
+{
+ /* versions
+ * 0 Hyglo versions 0.95 and 0.96 (large baords)
+ * ?? Hyglo version 0.97 (small board)
+ * 10 Spunk board
+ */
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ if (version) {
+ /* set up the GP IO pins (for the Spunk board) */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */
+ write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */
+ write_mmcr_byte(SC520_CLKSEL, 0x70);
+
+ write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */
+ write_mmcr_word(SC520_PIOSET31_16, 0x000c);
+
+ } else {
+ /* set up the GP IO pins (for the Hyglo board) */
+ write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */
+ write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */
+ write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */
+ write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */
+ write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */
+ write_mmcr_byte(SC520_CLKSEL, 0x70);
+
+ write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */
+ }
+
+ write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */
+ write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */
+ write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */
+ write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */
+ write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */
+ write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */
+ write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */
+
+ write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */
+
+ /* adjust the memory map:
+ * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM
+ * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio
+ * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
+
+
+
+ /* bootcs */
+ write_mmcr_long(SC520_PAR12, 0x8bffe800);
+
+ /* IDE0 = GPCS6 1f0-1f7 */
+ write_mmcr_long(SC520_PAR3, 0x380801f0);
+
+ /* IDE1 = GPCS7 3f6 */
+ write_mmcr_long(SC520_PAR4, 0x3c0003f6);
+
+ asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
+
+ write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS));
+
+}
+
+
+
+/* par usage:
+ * PAR0 (legacy_video)
+ * PAR1 (PCI ROM mapping)
+ * PAR2
+ * PAR3 IDE
+ * PAR4 IDE
+ * PAR5 (legacy_video)
+ * PAR6
+ * PAR7 (legacy_video)
+ * PAR8 (legacy_video)
+ * PAR9 (legacy_video)
+ * PAR10
+ * PAR11 (ISAROM)
+ * PAR12 BOOTCS
+ * PAR13
+ * PAR14
+ * PAR15
+ */
+
+/*
+ * This function should map a chunk of size bytes
+ * of the system address space to the ISA bus
+ *
+ * The function will return the memory address
+ * as seen by the host (which may very will be the
+ * same as the bus address)
+ */
+u32 isa_map_rom(u32 bus_addr, int size)
+{
+ u32 par;
+
+ printf("isa_map_rom asked to map %d bytes at %x\n",
+ size, bus_addr);
+
+ par = size;
+ if (par < 0x80000) {
+ par = 0x80000;
+ }
+ par >>= 12;
+ par--;
+ par&=0x7f;
+ par <<= 18;
+ par |= (bus_addr>>12);
+ par |= 0x50000000;
+
+ printf ("setting PAR11 to %x\n", par);
+
+ /* Map rom 0x10000 with PAR1 */
+ write_mmcr_long(SC520_PAR11, par);
+
+ return bus_addr;
+}
+
+/*
+ * this function removed any mapping created
+ * with pci_get_rom_window()
+ */
+void isa_unmap_rom(u32 addr)
+{
+ printf("isa_unmap_rom asked to unmap %x", addr);
+ if ((addr>>12) == (read_mmcr_long(SC520_PAR11)&0x3ffff)) {
+ write_mmcr_long(SC520_PAR11, 0);
+ printf(" done\n");
+ return;
+ }
+ printf(" not ours\n");
+}
+
+#ifdef CONFIG_PCI
+#define PCI_ROM_TEMP_SPACE 0x10000
+/*
+ * This function should map a chunk of size bytes
+ * of the system address space to the PCI bus,
+ * suitable to map PCI ROMS (bus address < 16M)
+ * the function will return the host memory address
+ * which should be converted into a bus address
+ * before used to configure the PCI rom address
+ * decoder
+ */
+u32 pci_get_rom_window(struct pci_controller *hose, int size)
+{
+ u32 par;
+
+ par = size;
+ if (par < 0x80000) {
+ par = 0x80000;
+ }
+ par >>= 16;
+ par--;
+ par&=0x7ff;
+ par <<= 14;
+ par |= (PCI_ROM_TEMP_SPACE>>16);
+ par |= 0x72000000;
+
+ printf ("setting PAR1 to %x\n", par);
+
+ /* Map rom 0x10000 with PAR1 */
+ write_mmcr_long(SC520_PAR1, par);
+
+ return PCI_ROM_TEMP_SPACE;
+}
+
+/*
+ * this function removed any mapping created
+ * with pci_get_rom_window()
+ */
+void pci_remove_rom_window(struct pci_controller *hose, u32 addr)
+{
+ printf("pci_remove_rom_window: %x", addr);
+ if (addr == PCI_ROM_TEMP_SPACE) {
+ write_mmcr_long(SC520_PAR1, 0);
+ printf(" done\n");
+ return;
+ }
+ printf(" not ours\n");
+
+}
+
+/*
+ * This function is called in order to provide acces to the
+ * legacy video I/O ports on the PCI bus.
+ * After this function accesses to I/O ports 0x3b0-0x3bb and
+ * 0x3c0-0x3df shuld result in transactions on the PCI bus.
+ *
+ */
+int pci_enable_legacy_video_ports(struct pci_controller *hose)
+{
+ /* Map video memory to 0xa0000*/
+ write_mmcr_long(SC520_PAR0, 0x7200400a);
+
+ /* forward all I/O accesses to PCI */
+ write_mmcr_byte(SC520_ADDDECCTL,
+ read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);
+
+
+ /* so we map away all io ports to pci (only way to access pci io
+ * below 0x400. But then we have to map back the portions that we dont
+ * use so that the generate cycles on the GPIO bus where the sio and
+ * ISA slots are connected, this requre the use of several PAR registers
+ */
+
+ /* bring 0x100 - 0x2f7 back to ISA using PAR5 */
+ write_mmcr_long(SC520_PAR5, 0x31f70100);
+
+ /* com2 use 2f8-2ff */
+
+ /* bring 0x300 - 0x3af back to ISA using PAR7 */
+ write_mmcr_long(SC520_PAR7, 0x30af0300);
+
+ /* vga use 3b0-3bb */
+
+ /* bring 0x3bc - 0x3bf back to ISA using PAR8 */
+ write_mmcr_long(SC520_PAR8, 0x300303bc);
+
+ /* vga use 3c0-3df */
+
+ /* bring 0x3e0 - 0x3f7 back to ISA using PAR9 */
+ write_mmcr_long(SC520_PAR9, 0x301703e0);
+
+ /* com1 use 3f8-3ff */
+
+ return 0;
+}
+#endif
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ init_sc520();
+ bus_init();
+ irq_init();
+
+ /* max drive current on SDRAM */
+ write_mmcr_word(SC520_DSCTL, 0x0100);
+
+ /* enter debug mode after next reset (only if jumper is also set) */
+ write_mmcr_byte(SC520_RESCFG, 0x08);
+ /* configure the software timer to 33.000MHz */
+ write_mmcr_byte(SC520_SWTMRCFG, 1);
+ gd->bus_clk = 33000000;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ init_sc520_dram();
+ return 0;
+}
+
+void show_boot_progress(int val)
+{
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ if (version == 0) {
+ /* PIO31-PIO16 Data */
+ write_mmcr_word(SC520_PIODATA31_16,
+ (read_mmcr_word(SC520_PIODATA31_16) & 0xffc0)| ((val&0x7e)>>1)); /* 0x1f8 >> 3 */
+
+ /* PIO0-PIO15 Data */
+ write_mmcr_word(SC520_PIODATA15_0,
+ (read_mmcr_word(SC520_PIODATA15_0) & 0x1fff)| ((val&0x7)<<13));
+ } else {
+ /* newer boards use PIO4-PIO12 */
+ /* PIO0-PIO15 Data */
+#if 0
+ val = (val & 0x007) | ((val & 0x038) << 3) | ((val & 0x1c0) >> 3);
+#else
+ val = (val & 0x007) | ((val & 0x07e) << 2);
+#endif
+ write_mmcr_word(SC520_PIODATA15_0,
+ (read_mmcr_word(SC520_PIODATA15_0) & 0xe00f) | ((val&0x01ff)<<4));
+ }
+}
+
+
+int last_stage_init(void)
+{
+
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ printf("Omicron Ceti SC520 Spunk revision %x\n", version);
+
+#if 0
+ if (version) {
+ int x, y;
+
+ printf("eeprom probe %d\n", spi_eeprom_probe(1));
+
+ spi_eeprom_read(1, 0, (u8*)&x, 2);
+ spi_eeprom_read(1, 1, (u8*)&y, 2);
+ printf("eeprom bytes %04x%04x\n", x, y);
+ x ^= 0xffff;
+ y ^= 0xffff;
+ spi_eeprom_write(1, 0, (u8*)&x, 2);
+ spi_eeprom_write(1, 1, (u8*)&y, 2);
+
+ spi_eeprom_read(1, 0, (u8*)&x, 2);
+ spi_eeprom_read(1, 1, (u8*)&y, 2);
+ printf("eeprom bytes %04x%04x\n", x, y);
+
+ } else {
+ int x, y;
+
+ printf("eeprom probe %d\n", mw_eeprom_probe(1));
+
+ mw_eeprom_read(1, 0, (u8*)&x, 2);
+ mw_eeprom_read(1, 1, (u8*)&y, 2);
+ printf("eeprom bytes %04x%04x\n", x, y);
+
+ x ^= 0xffff;
+ y ^= 0xffff;
+ mw_eeprom_write(1, 0, (u8*)&x, 2);
+ mw_eeprom_write(1, 1, (u8*)&y, 2);
+
+ mw_eeprom_read(1, 0, (u8*)&x, 2);
+ mw_eeprom_read(1, 1, (u8*)&y, 2);
+ printf("eeprom bytes %04x%04x\n", x, y);
+
+
+ }
+#endif
+
+ ds1722_probe(2);
+
+ return 0;
+}
+
+void ssi_chip_select(int dev)
+{
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
+ if (version) {
+ /* Spunk board: EEPROM and CAN are actove-low, TEMP and AUX are active high */
+ switch (dev) {
+ case 1: /* EEPROM */
+ write_mmcr_word(SC520_PIOCLR31_16, 0x0004);
+ break;
+
+ case 2: /* Temp Probe */
+ write_mmcr_word(SC520_PIOSET31_16, 0x0002);
+ break;
+
+ case 3: /* CAN */
+ write_mmcr_word(SC520_PIOCLR31_16, 0x0008);
+ break;
+
+ case 4: /* AUX */
+ write_mmcr_word(SC520_PIOSET31_16, 0x0001);
+ break;
+
+ case 0:
+ write_mmcr_word(SC520_PIOCLR31_16, 0x0003);
+ write_mmcr_word(SC520_PIOSET31_16, 0x000c);
+ break;
+
+ default:
+ printf("Illegal SSI device requested: %d\n", dev);
+ }
+ } else {
+
+ /* Globox board: Both EEPROM and TEMP are active-high */
+
+ switch (dev) {
+ case 1: /* EEPROM */
+ write_mmcr_word(SC520_PIOSET15_0, 0x0100);
+ break;
+
+ case 2: /* Temp Probe */
+ write_mmcr_word(SC520_PIOSET15_0, 0x0080);
+ break;
+
+ case 0:
+ write_mmcr_word(SC520_PIOCLR15_0, 0x0180);
+ break;
+
+ default:
+ printf("Illegal SSI device requested: %d\n", dev);
+ }
+ }
+}
+
+
+void spi_init_f(void)
+{
+ read_mmcr_byte(SC520_SYSINFO) ?
+ spi_eeprom_probe(1) :
+ mw_eeprom_probe(1);
+
+}
+
+ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
+{
+ int offset;
+ int i;
+
+ offset = 0;
+ for (i=0;i<alen;i++) {
+ offset <<= 8;
+ offset |= addr[i];
+ }
+
+ return read_mmcr_byte(SC520_SYSINFO) ?
+ spi_eeprom_read(1, offset, buffer, len) :
+ mw_eeprom_read(1, offset, buffer, len);
+}
+
+ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
+{
+ int offset;
+ int i;
+
+ offset = 0;
+ for (i=0;i<alen;i++) {
+ offset <<= 8;
+ offset |= addr[i];
+ }
+
+ return read_mmcr_byte(SC520_SYSINFO) ?
+ spi_eeprom_write(1, offset, buffer, len) :
+ mw_eeprom_write(1, offset, buffer, len);
+}
+