* Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs.
* Patch by Marc Singer, 28 May 2003:
Added port I/O commands.
* Patch by Matthew McClintock, 28 May 2003
- cpu/mpc824x/start.S: fix relocation code when booting from RAM
- minor patches for utx8245
* Patch by Daniel Engström, 28 May 2003:
x86 update
* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
add nand flash support to SXNI855T configuration
fix/extend nand flash support:
- fix 'nand erase' command so does not erase bad blocks
- fix 'nand write' command so does not write to bad blocks
- fix nand_probe() so handles no flash detected properly
- add doc/README.nand
- add .jffs2 and .oob options to nand read/write
- add 'nand bad' command to list bad blocks
- add 'clean' option to 'nand erase' to write JFFS2 clean markers
- make NAND read/write faster
* Patch by Rune Torgersen, 23 May 2003:
Update for MPC8266ADS board
diff --git a/doc/TODO-i386 b/doc/TODO-i386
index 0969cbc..84113f8 100644
--- a/doc/TODO-i386
+++ b/doc/TODO-i386
@@ -4,8 +4,6 @@
* setup the BIOS data area and BIOS equipment word to reflect machine config.
* Make reset work (from Linux and from the boot prompt)
* DMA, FDC, RTC, KBC initialization
-* video card support (call BIOS to initialize, use helper routrine in BSP to shadow
- video rom if on pci) and PC keyboard
* split of part of cpu/i386/interrupt.c to cpu/i385/entry.c?
* re-entry of protected mode from real mode, should be added to realmode_switch.S
(and used by INT 10h and INT 16h handlers for console I/O during early
@@ -13,8 +11,6 @@
* missing functions in lib_i386 and cpu/i386
* speaker beep interface
-i386 port bugs:
-* IDE does not work
SC520 missing features:
* Watchdog
@@ -24,16 +20,10 @@
* SC520 MMCR reset
SC520 CDP board support missing features:
-* Synchronius serial port and seriel EEPROM
-* environment in SEEP
-* environment in flash
* environment in sram
-* status LED ?
-* flash driver
SC520 CDP board support bugs:
+* SPI EEPROM support does not work
* 0x680 LEDS dos not work for me
* is it possible to make both the internal serial ports and the
ports on the sio work at the same time?
-* ali sio cio lines?
-* On-borad ethernet does not work from Linux