* Add support for Promess ATC board
* Patch by Keith Outwater, 28 Apr 2003:
- Miscellaneous corrections and additions to GEN860T board specific code.
- Added GEN860_SC variant to GEN860T.
- Miscellaneous corrections to GEN860T documentation.
- Correct duplicate entry in U-Boot CREDITS file.
- Add GEN860T_SC entry in MAINTAINERS file.
- Update CREDITS file with GEN860T_SC info.
* Update Smiths Aerospace addresses in MAINTAINERS file
* Fix error handling in hush's version of "run" command
diff --git a/board/gen860t/ioport.c b/board/gen860t/ioport.c
index 5d6524d..7b3ebd4 100644
--- a/board/gen860t/ioport.c
+++ b/board/gen860t/ioport.c
@@ -42,8 +42,9 @@
const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
/*
* Port A configuration
- * Pin Signal Type Active Initial state
- * PA7 fpgaProgramLowOut Out Low High
+ * Pin Signal Type Active Initial state
+ * PA7 fpgaProgramLowOut Out Low High
+ * PA1 fpgaCoreVoltageFailLow In Low N/A
*/
{ /* conf ppar psor pdir podr pdat pint function */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */
@@ -62,22 +63,32 @@
/* PA4 */ { 1, 0, 0, 1, 0, 0, 0 }, /* red bicolor LED 0*/
/* PA3 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PA2 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#if !defined(CONFIG_SC)
+ /* PA1 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaCoreVoltageFail*/
+#else
/* PA1 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#endif
/* PA0 */ { 0, 0, 0, 0, 0, 0, 0 } /* */
},
/*
+ * Port B configuration
* Pin Signal Type Active Initial state
* PB14 docBusyLowIn In Low X
* PB15 gpio1Sig Out High Low
* PB16 fpgaDoneBi In High X
- * PB17 swBitOkLowOut Out Low Low
+ * PB17 swBitOkLowOut Out Low High
* PB19 speakerVolSig Out/Hi-Z High/Low High (Hi-Z)
* PB22 fpgaInitLowBi In Low X
* PB23 batteryOkSig In High X
- */
- { /* conf ppar psor pdir podr pdat pint function */
- /* PB31 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+ * PB31 pulseCatcherClr Out High 0
+ */
+ { /* conf ppar psor pdir podr pdat pint function */
+#if !defined(CONFIG_SC)
+ /* PB31 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#else
+ /* PB31 */ { 1, 0, 0, 1, 0, 0, 0 }, /* pulseCatcherClr */
+#endif
/* PB30 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PB29 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PB28 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
@@ -85,19 +96,32 @@
/* PB26 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PB25 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PB24 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#if !defined(CONFIG_SC)
/* PB23 */ { 1, 0, 0, 0, 0, 0, 0 }, /* batteryOk */
+#else
+ /* PB23 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#endif
/* PB22 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaInitLowBi */
/* PB21 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PB20 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#if !defined(CONFIG_SC)
/* PB19 */ { 1, 0, 0, 1, 1, 1, 0 }, /* speakerVol */
+#else
+ /* PB19 */ { 0, 0, 0, 1, 1, 1, 0 }, /* */
+#endif
/* PB18 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
- /* PB17 */ { 1, 0, 0, 1, 0, 0, 0 }, /* swBitOkLow */
+ /* PB17 */ { 1, 0, 0, 1, 0, 1, 0 }, /* swBitOkLow */
/* PB16 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaDone */
/* PB15 */ { 1, 0, 0, 1, 0, 0, 0 }, /* gpio1 */
+#if !defined(CONFIG_SC)
/* PB14 */ { 1, 0, 0, 0, 0, 0, 0 } /* docBusyLow */
- },
+#else
+ /* PB14 */ { 0, 0, 0, 0, 0, 0, 0 } /* */
+#endif
+ },
/*
+ * Port C configuration
* Pin Signal Type Active Initial state
* PC4 i2cBus1EnSig Out High High
* PC5 i2cBus2EnSig Out High High
@@ -108,29 +132,48 @@
* PC12 systemBitOkIn In High X
* PC15 selfDreqLow In Low X
*/
- { /* conf ppar psor pdir podr pdat pint function */
+ { /* conf ppar psor pdir podr pdat pint function */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PC15 */ { 1, 0, 0, 0, 0, 0, 0 }, /* selfDreqLowIn */
/* PC14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PC13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#if !defined(CONFIG_SC)
/* PC12 */ { 1, 0, 0, 0, 0, 0, 0 }, /* systemBitOkIn */
+#else
+ /* PC12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#endif
/* PC11 */ { 1, 0, 0, 1, 0, 1, 0 }, /* fpgaResetLowOut */
+#if !defined(CONFIG_SC)
/* PC10 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus4EnSig */
+#else
+ /* PC10 */ { 0, 0, 0, 1, 0, 1, 0 }, /* */
+#endif
/* PC9 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
+#if !defined(CONFIG_SC)
/* PC8 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus3EnSig */
+#else
+ /* PC8 */ { 0, 0, 0, 1, 0, 1, 0 }, /* */
+#endif
/* PC7 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PC6 */ { 1, 0, 0, 1, 0, 1, 0 }, /* gpio0 */
+#if !defined(CONFIG_SC)
/* PC5 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus2EnSig */
/* PC4 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus1EnSig */
+#else
+ /* PC5 */ { 0, 0, 0, 1, 0, 1, 0 }, /* */
+ /* PC4 */ { 0, 0, 0, 1, 0, 1, 0 }, /* */
+#endif
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 } /* */
- },
+ },
- /* Port D configuration */
- { /* conf ppar psor pdir podr pdat pint function */
+ /*
+ * Port D configuration
+ */
+ { /* conf ppar psor pdir podr pdat pint function */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* PD15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
@@ -149,7 +192,7 @@
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */
/* N/A */ { 0, 0, 0, 0, 0, 0, 0 } /* */
- }
+ }
};
/*