blob: 0ecc44ace26c6e4b2cfb4f82f0dec861d71c2f93 [file] [log] [blame]
/*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fec.h>
#include <asm/immap.h>
#include <config.h>
#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
#undef MII_DEBUG
#undef ET_DEBUG
int fecpin_setclear(struct eth_device *dev, int setclear)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
if (setclear) {
gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
} else {
}
return 0;
}
#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
#include <miiphy.h>
/* Make MII read/write commands for the FEC. */
#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
/* PHY identification */
#define PHY_ID_LXT970 0x78100000 /* LXT970 */
#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
#define PHY_ID_QS6612 0x01814400 /* QS6612 */
#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
#define PHY_ID_AMD79C874VC 0x0022561B /* AMD 79C874 */
#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
#define STR_ID_LXT970 "LXT970"
#define STR_ID_LXT971 "LXT971"
#define STR_ID_82555 "Intel82555"
#define STR_ID_QS6612 "QS6612"
#define STR_ID_AMD79C784 "AMD79C784"
#define STR_ID_AMD79C874VC "AMD79C874VC"
#define STR_ID_LSI80225 "LSI80225"
#define STR_ID_LSI80225B "LSI80225/B"
#define STR_ID_DP83848VV "N83848"
#define STR_ID_DP83849 "N83849"
/****************************************************************************
* mii_init -- Initialize the MII for MII command without ethernet
* This function is a subset of eth_init
****************************************************************************
*/
void mii_reset(struct fec_info_s *info)
{
volatile fec_t *fecp = (fec_t *) (info->miibase);
int i;
fecp->ecr = FEC_ECR_RESET;
for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
udelay(1);
}
if (i == FEC_RESET_DELAY) {
printf("FEC_RESET_DELAY timeout\n");
}
}
/* send command to phy using mii, wait for result */
uint mii_send(uint mii_cmd)
{
struct fec_info_s *info;
struct eth_device *dev;
volatile fec_t *ep;
uint mii_reply;
int j = 0;
/* retrieve from register structure */
dev = eth_get_dev();
info = dev->priv;
ep = (fec_t *) info->miibase;
ep->mmfr = mii_cmd; /* command to phy */
/* wait for mii complete */
while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
udelay(1);
j++;
}
if (j >= MCFFEC_TOUT_LOOP) {
printf("MII not complete\n");
return -1;
}
mii_reply = ep->mmfr; /* result from phy */
ep->eir = FEC_EIR_MII; /* clear MII complete */
#ifdef ET_DEBUG
printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
__FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
#endif
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
{
#define MAX_PHY_PASSES 11
struct fec_info_s *info = dev->priv;
int phyaddr, pass;
uint phyno, phytype;
if (info->phyname_init)
return info->phy_addr;
phyaddr = -1; /* didn't find a PHY yet */
for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
if (pass > 1) {
/* PHY may need more time to recover from reset.
* The LXT970 needs 50ms typical, no maximum is
* specified, so wait 10ms before try again.
* With 11 passes this gives it 100ms to wake up.
*/
udelay(10000); /* wait 10ms */
}
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
#ifdef ET_DEBUG
printf("PHY type 0x%x pass %d type\n", phytype, pass);
#endif
if (phytype != 0xffff) {
phyaddr = phyno;
phytype <<= 16;
phytype |=
mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
switch (phytype & 0xffffffff) {
case PHY_ID_AMD79C874VC:
strcpy(info->phy_name,
STR_ID_AMD79C874VC);
info->phyname_init = 1;
break;
default:
strcpy(info->phy_name, "unknown");
info->phyname_init = 1;
break;
}
#ifdef ET_DEBUG
printf("PHY @ 0x%x pass %d type ", phyno, pass);
switch (phytype & 0xffffffff) {
case PHY_ID_AMD79C874VC:
printf(STR_ID_AMD79C874VC);
break;
default:
printf("0x%08x\n", phytype);
break;
}
#endif
}
}
}
if (phyaddr < 0)
printf("No PHY device found.\n");
return phyaddr;
}
#endif /* CFG_DISCOVER_PHY */
void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{
volatile fec_t *fecp;
struct fec_info_s *info;
struct eth_device *dev;
int miispd = 0, i = 0;
u16 autoneg = 0;
/* retrieve from register structure */
dev = eth_get_dev();
info = dev->priv;
fecp = (fec_t *) info->miibase;
fecpin_setclear(dev, 1);
mii_reset(info);
/* We use strictly polling mode only */
fecp->eimr = 0;
/* Clear any pending interrupt */
fecp->eir = 0xffffffff;
/* Set MII speed */
miispd = (gd->bus_clk / 1000000) / 5;
fecp->mscr = miispd << 1;
info->phy_addr = mii_discover_phy(dev);
#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
while (i < MCFFEC_TOUT_LOOP) {
autoneg = 0;
miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
i++;
if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
break;
udelay(500);
}
if (i >= MCFFEC_TOUT_LOOP) {
printf("Auto Negotiation not complete\n");
}
/* adapt to the half/full speed settings */
info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
}
/*****************************************************************************
* Read and write a MII PHY register, routines used by MII Utilities
*
* FIXME: These routines are expected to return 0 on success, but mii_send
* does _not_ return an error code. Maybe 0xFFFF means error, i.e.
* no PHY connected...
* For now always return 0.
* FIXME: These routines only work after calling eth_init() at least once!
* Otherwise they hang in mii_send() !!! Sorry!
*****************************************************************************/
int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
unsigned short *value)
{
short rdreg; /* register working value */
#ifdef MII_DEBUG
printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
#endif
rdreg = mii_send(mk_mii_read(addr, reg));
*value = rdreg;
#ifdef MII_DEBUG
printf("0x%04x\n", *value);
#endif
return 0;
}
int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
unsigned short value)
{
short rdreg; /* register working value */
#ifdef MII_DEBUG
printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
#endif
rdreg = mii_send(mk_mii_write(addr, reg, value));
#ifdef MII_DEBUG
printf("0x%04x\n", value);
#endif
return 0;
}
#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */