ARM: Introduce ability to enable ACR::IBE on Cortex-A8 for CVE-2017-5715

As recommended by Arm in [1], IBE[2] has to be enabled unconditionally
for BPIALL to be functional on Cortex-A8 processors. Provide a config
option for platforms to enable this option based on impact analysis
for products.

NOTE: This patch in itself is NOT the final solution, this requires:
a) Implementation of v7_arch_cp15_set_acr on SoCs which may not
   provide direct access to ACR register.
b) Operating Systems such as Linux to provide adequate workaround in the right
   locations.
c) This workaround applies to only the boot processor. It is important
   to apply workaround as necessary (context-save-restore) around low
   power context loss OR additional processors as necessary in either
   firmware support OR elsewhere in OS.

[1] https://developer.arm.com/support/security-update
[2] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0344k/Bgbffjhh.html

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Andre Przywara <Andre.Przywara@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>

Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index c996525..3beaf5a 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -252,12 +252,15 @@
 	pop	{r1-r5}			@ Restore the cpu info - fall through
 #endif
 
-#ifdef CONFIG_ARM_ERRATA_430973
+#if defined(CONFIG_ARM_ERRATA_430973) || defined (CONFIG_ARM_CORTEX_A8_CVE_2017_5715)
 	mrc	p15, 0, r0, c1, c0, 1	@ Read ACR
 
+#ifdef CONFIG_ARM_CORTEX_A8_CVE_2017_5715
+	orr	r0, r0, #(0x1 << 6)	@ Set IBE bit always to enable OS WA
+#else
 	cmp	r2, #0x21		@ Only on < r2p1
 	orrlt	r0, r0, #(0x1 << 6)	@ Set IBE bit
-
+#endif
 	push	{r1-r5}			@ Save the cpu info registers
 	bl	v7_arch_cp15_set_acr
 	pop	{r1-r5}			@ Restore the cpu info - fall through