board: gateworks: venice: dynamically update the update_firmware script
The update_firmware script is intended to update the boot firmware but
the details including the offset and hardware partition are dependent
on the boot device.
Specifically:
- IMX8MM/IMX8MP (BOOTROM v2) the offset is 32KiB for SD and eMMC user
hardware partition and 0KiB for eMMC boot partitions.
- IMX8MM the offset is 33KiB for SD and eMMC regardless of hardware
partition.
Dynamically set soc, dev, bootpart, and bootblk env vars at runtime
and use these in the update_firmware script. Remove the splblk env var
from config files as its no longer needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c
index 7aca755..803582c 100644
--- a/board/gateworks/venice/venice.c
+++ b/board/gateworks/venice/venice.c
@@ -6,10 +6,12 @@
#include <fdt_support.h>
#include <init.h>
#include <led.h>
+#include <mmc.h>
#include <miiphy.h>
#include <mmc.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
#include "eeprom.h"
@@ -94,10 +96,12 @@
int board_late_init(void)
{
const char *str;
+ struct mmc *mmc = NULL;
char env[32];
int ret, i;
u8 enetaddr[6];
char fdt[64];
+ int bootdev;
/* Set board serial/model */
if (!env_get("serial#"))
@@ -132,6 +136,73 @@
i++;
} while (!ret);
+ /*
+ * set bootdev/bootblk/bootpart (used in firmware_update script)
+ * dynamically depending on boot device and SoC
+ */
+ bootdev = -1;
+ switch (get_boot_device()) {
+ case SD1_BOOT:
+ case MMC1_BOOT: /* SDHC1 */
+ bootdev = 0;
+ break;
+ case SD2_BOOT:
+ case MMC2_BOOT: /* SDHC2 */
+ bootdev = 1;
+ break;
+ case SD3_BOOT:
+ case MMC3_BOOT: /* SDHC3 */
+ bootdev = 2;
+ break;
+ default:
+ break;
+ }
+ if (bootdev != -1)
+ mmc = find_mmc_device(bootdev);
+ if (mmc) {
+ int bootblk;
+
+ if (IS_ENABLED(CONFIG_IMX8MN) || IS_ENABLED(CONFIG_IMX8MP))
+ bootblk = 32 * SZ_1K / 512;
+ else
+ bootblk = 33 * SZ_1K / 512;
+ mmc_init(mmc);
+ if (!IS_SD(mmc)) {
+ int bootpart;
+
+ switch (EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config)) {
+ case 1: /* boot0 */
+ bootpart = 1;
+ break;
+ case 2: /* boot1 */
+ bootpart = 2;
+ break;
+ case 7: /* user */
+ default:
+ bootpart = 0;
+ break;
+ }
+ /* IMX8MP/IMX8MN BOOTROM v2 uses offset=0 for boot parts */
+ if ((IS_ENABLED(CONFIG_IMX8MN) || IS_ENABLED(CONFIG_IMX8MP)) &&
+ (bootpart == 1 || bootpart == 2))
+ bootblk = 0;
+ env_set_hex("bootpart", bootpart);
+ env_set_hex("bootblk", bootblk);
+ } else { /* SD */
+ env_set("bootpart", "");
+ env_set_hex("bootblk", bootblk);
+ }
+ env_set_hex("dev", bootdev);
+ }
+
+ /* override soc=imx8m to provide a more specific soc name */
+ if (IS_ENABLED(CONFIG_IMX8MN))
+ env_set("soc", "imx8mn");
+ else if (IS_ENABLED(CONFIG_IMX8MP))
+ env_set("soc", "imx8mp");
+ else if (IS_ENABLED(CONFIG_IMX8MM))
+ env_set("soc", "imx8mm");
+
return 0;
}