arm: mach-omap2: am33xx: Disable EMIF_DEVOFF immediately before hw leveling
In case of RTC+DDR resume, need to restore EMIF context
before initiating hardware leveling.
Signed-off-by: Brad Griffis <bgriffis@ti.com>
[j-keerthy@ti.com Fixed the am335x build issues]
Signed-off-by: Keerthy <j-keerthy@ti.com>
diff --git a/arch/arm/mach-omap2/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c
index 5d947a6..c70b6fe 100644
--- a/arch/arm/mach-omap2/am33xx/ddr.c
+++ b/arch/arm/mach-omap2/am33xx/ddr.c
@@ -80,6 +80,11 @@
*/
void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
{
+#ifdef CONFIG_AM43XX
+ struct prm_device_inst *prm_device =
+ (struct prm_device_inst *)PRM_DEVICE_INST;
+#endif
+
writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
writel(0xA0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
@@ -126,6 +131,15 @@
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
+#ifdef CONFIG_AM43XX
+ /*
+ * Disable EMIF_DEVOFF
+ * -> Cold Boot: This is just rewriting the default register value.
+ * -> RTC Resume: Must disable DEVOFF before leveling.
+ */
+ writel(0, &prm_device->emif_ctrl);
+#endif
+
/* Perform hardware leveling for DDR3 */
if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) {
writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36) |