| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * am335x_guardian_.h |
| * |
| * Copyright (C) 2018 Robert Bosch Power Tools GmbH |
| * Copyright (C) 2018 sjoerd Simons <sjoerd.simons@collabora.co.uk> |
| * |
| */ |
| |
| #ifndef __CONFIG_AM335X_GUARDIAN_H |
| #define __CONFIG_AM335X_GUARDIAN_H |
| |
| #include <configs/ti_am335x_common.h> |
| |
| #ifndef CONFIG_SPL_BUILD |
| #define CONFIG_TIMESTAMP |
| #endif |
| |
| #define CONFIG_SYS_BOOTM_LEN (16 << 20) |
| |
| /* Clock Defines */ |
| #define V_OSCK 24000000 /* Clock output from T2 */ |
| #define V_SCLK (V_OSCK) |
| |
| #ifndef CONFIG_SPL_BUILD |
| |
| #define MEM_LAYOUT_ENV_SETTINGS \ |
| "scriptaddr=0x80000000\0" \ |
| "pxefile_addr_r=0x80100000\0" \ |
| "tftp_load_addr=0x82000000\0" \ |
| "kernel_addr_r=0x82000000\0" \ |
| "fdt_addr_r=0x88000000\0" \ |
| "ramdisk_addr_r=0x88080000\0" \ |
| |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(UBIFS, ubifs, 0) |
| |
| #define AM335XX_BOARD_FDTFILE "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" |
| |
| #include <config_distro_bootcmd.h> |
| |
| #define GUARDIAN_DEFAULT_PROD_ENV \ |
| "factory_assembly_status=0\0" \ |
| "main_pcba_part_number=0\0" \ |
| "main_pcba_supplier=0\0" \ |
| "main_pcba_timestamp=0\0" \ |
| "main_pcba_hardware_version=0\0" \ |
| "main_pcba_id=0\0" \ |
| "main_pcba_aux_1=0\0" \ |
| "main_pcba_aux_2=0\0" \ |
| "main_pcba_aux_3=0\0" \ |
| "main_pcba_aux_4=0\0" \ |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| AM335XX_BOARD_FDTFILE \ |
| MEM_LAYOUT_ENV_SETTINGS \ |
| BOOTENV \ |
| GUARDIAN_DEFAULT_PROD_ENV \ |
| "autoload=no\0" \ |
| "backlight_brightness=50\0" \ |
| "bootubivol=rootfs\0" \ |
| "distro_bootcmd=" \ |
| "setenv rootflags \"bulk_read,chk_data_crc\"; " \ |
| "setenv ethact usb_ether; " \ |
| "if test \"${swi_status}\" -eq 1; then " \ |
| "if dhcp; then " \ |
| "sleep 1; " \ |
| "if tftp \"${tftp_load_addr}\" \"bootscript.scr\"; then " \ |
| "source \"${tftp_load_addr}\"; " \ |
| "fi; " \ |
| "fi; " \ |
| "setenv extrabootargs $extrabootargs \"swi_attached\"; " \ |
| "fi;" \ |
| "run bootcmd_ubifs0;\0" \ |
| "altbootcmd=" \ |
| "setenv boot_syslinux_conf \"extlinux/extlinux-rollback.conf\"; " \ |
| "run distro_bootcmd; " \ |
| "setenv boot_syslinux_conf \"extlinux/extlinux.conf\"; " \ |
| "run bootcmd_ubifs0;\0" |
| |
| #endif /* ! CONFIG_SPL_BUILD */ |
| |
| #define CONFIG_BMP_16BPP |
| #define SPLASH_SCREEN_NAND_PART "nand0,10" |
| #define SPLASH_SCREEN_BMP_FILE_SIZE 0x26000 |
| #define SPLASH_SCREEN_BMP_LOAD_ADDR 0x82000000 |
| #define SPLASH_SCREEN_TEXT "U-Boot" |
| |
| /* BGR 16Bit Color Definitions */ |
| #define CONSOLE_COLOR_BLACK 0x0000 |
| #define CONSOLE_COLOR_WHITE 0xFFFF |
| #define CONSOLE_COLOR_RED 0x001F |
| |
| /* NS16550 Configuration */ |
| #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ |
| #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ |
| #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ |
| #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ |
| #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ |
| #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ |
| |
| /* PMIC support */ |
| #define CONFIG_POWER_TPS65217 |
| |
| /* Bootcount using the RTC block */ |
| #define CONFIG_SYS_BOOTCOUNT_LE |
| |
| #ifdef CONFIG_MTD_RAW_NAND |
| |
| #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
| #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ |
| CONFIG_SYS_NAND_PAGE_SIZE) |
| #define CONFIG_SYS_NAND_PAGE_SIZE 4096 |
| #define CONFIG_SYS_NAND_OOBSIZE 256 |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) |
| |
| #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ |
| 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ |
| 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ |
| 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ |
| 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ |
| 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ |
| 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ |
| 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ |
| 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ |
| 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ |
| 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ |
| 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ |
| 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ |
| 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ |
| 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ |
| 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ |
| 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ |
| 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ |
| 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ |
| 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ |
| 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ |
| } |
| #define CONFIG_SYS_NAND_ECCSIZE 512 |
| #define CONFIG_SYS_NAND_ECCBYTES 26 |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW |
| #define MTDIDS_DEFAULT "nand0=nand.0" |
| |
| #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS |
| |
| #endif /* CONFIG_MTD_RAW_NAND */ |
| |
| #define CONFIG_AM335X_USB0 |
| #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL |
| #define CONFIG_AM335X_USB1 |
| #define CONFIG_AM335X_USB1_MODE MUSB_HOST |
| |
| #endif /* ! __CONFIG_AM335X_GUARDIAN_H */ |