Merge branch 'master' of git://git.denx.de/u-boot-uniphier
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5afe8a9..5f10243 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -45,8 +45,11 @@
uniphier-ph1-ld4-ref.dtb \
uniphier-ph1-ld6b-ref.dtb \
uniphier-ph1-pro4-ref.dtb \
+ uniphier-ph1-pro5-4kbox.dtb \
uniphier-ph1-sld3-ref.dtb \
- uniphier-ph1-sld8-ref.dtb
+ uniphier-ph1-sld8-ref.dtb \
+ uniphier-proxstream2-gentil.dtb \
+ uniphier-proxstream2-vodka.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb \
diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
index 20f2e9a..9d697c1 100644
--- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
@@ -61,6 +61,20 @@
};
/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
&serial0 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+ u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
index 58dc20e..bd86f093 100644
--- a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
@@ -3,6 +3,7 @@
*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
+ * SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
@@ -54,6 +55,20 @@
};
/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
&serial0 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+ u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
index ec1117d..a825069 100644
--- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
@@ -68,6 +68,20 @@
};
/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
&serial0 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+ u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts
new file mode 100644
index 0000000..912bc27
--- /dev/null
+++ b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts
@@ -0,0 +1,64 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro5 4KBOX Board (EVB-Pro5-4KBOX-M-V0)
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro5.dtsi"
+
+/ {
+ model = "UniPhier PH1-Pro5 4KBOX Board";
+ compatible = "socionext,ph1-pro5-4kbox", "socionext,ph1-pro5";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,115200";
+ stdout-path = &serial1;
+ };
+
+ aliases {
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&serial1 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart1 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
index 6269f9a..2cfcaff 100644
--- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
@@ -65,6 +65,20 @@
};
/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
&serial0 {
- u-boot,dm-pre-reloc;
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+ u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/uniphier-pinctrl.dtsi b/arch/arm/dts/uniphier-pinctrl.dtsi
index f67445f..b584213 100644
--- a/arch/arm/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/dts/uniphier-pinctrl.dtsi
@@ -3,43 +3,7 @@
*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * SPDX-License-Identifier: GPL-2.0+ X11
*/
&pinctrl {
diff --git a/arch/arm/dts/uniphier-proxstream2-gentil.dts b/arch/arm/dts/uniphier-proxstream2-gentil.dts
new file mode 100644
index 0000000..81d2385
--- /dev/null
+++ b/arch/arm/dts/uniphier-proxstream2-gentil.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 Gentil Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+ model = "UniPhier ProXstream2 Gentil Board";
+ compatible = "socionext,proxstream2-gentil", "socionext,proxstream2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS2,115200";
+ stdout-path = &serial2;
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&serial2 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/uniphier-proxstream2-vodka.dts b/arch/arm/dts/uniphier-proxstream2-vodka.dts
new file mode 100644
index 0000000..fba7b74
--- /dev/null
+++ b/arch/arm/dts/uniphier-proxstream2-vodka.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 Vodka Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+ model = "UniPhier ProXstream2 Vodka Board";
+ compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS2,115200";
+ stdout-path = &serial2;
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+/* for U-boot only */
+/ {
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&serial2 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 7b49ad3..22ab798 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -6,49 +6,68 @@
config UNIPHIER_SMP
bool
-choice
- prompt "UniPhier SoC select"
- default MACH_PH1_PRO4
-
-config MACH_PH1_SLD3
- bool "PH1-sLD3"
+config ARCH_UNIPHIER_PH1_SLD3
+ bool "UniPhier PH1-sLD3 SoC"
select UNIPHIER_SMP
-
-config MACH_PH1_LD4
- bool "PH1-LD4"
-
-config MACH_PH1_PRO4
- bool "PH1-Pro4"
- select UNIPHIER_SMP
-
-config MACH_PH1_SLD8
- bool "PH1-sLD8"
-
-endchoice
-
-choice
- prompt "UniPhier Support Card select"
- optional
-
-config PFC_MICRO_SUPPORT_CARD
- bool "Support card with PFC CPLD"
help
- This option provides support for the expansion board with PFC
- original address mapping.
+ This enables support for UniPhier PH1-sLD3 SoC.
+
+config ARCH_UNIPHIER_PH1_LD4
+ bool "UniPhier PH1-LD4 SoC"
+ depends on !ARCH_UNIPHIER_PH1_SLD3
+ help
+ This enables support for UniPhier PH1-LD4 SoC.
+
+config ARCH_UNIPHIER_PH1_PRO4
+ bool "UniPhier PH1-Pro4 SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier PH1-Pro4 SoC.
+
+config ARCH_UNIPHIER_PH1_SLD8
+ bool "UniPhier PH1-sLD8 SoC"
+ depends on !ARCH_UNIPHIER_PH1_SLD3
+ help
+ This enables support for UniPhier PH1-sLD8 SoC.
+
+config ARCH_UNIPHIER_PH1_PRO5
+ bool "UniPhier PH1-Pro5 SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier PH1-Pro5 SoC.
+
+config ARCH_UNIPHIER_PROXSTREAM2
+ bool "UniPhier ProXstream2 SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier ProXstream2 SoC.
+
+config ARCH_UNIPHIER_PH1_LD6B
+ bool "UniPhier PH1-LD6b SoC"
+ select UNIPHIER_SMP
+ depends on !ARCH_UNIPHIER_PH1_SLD3 && \
+ !ARCH_UNIPHIER_PH1_LD4 && \
+ !ARCH_UNIPHIER_PH1_SLD8
+ help
+ This enables support for UniPhier PH1-LD6b SoC.
+
+config MICRO_SUPPORT_CARD
+ bool "Use Micro Support Card"
+ help
+ This option provides support for the expansion board, available
+ on some UniPhier reference boards.
Say Y to use the on-board UART, Ether, LED devices.
-config DCC_MICRO_SUPPORT_CARD
- bool "Support card with DCC CPLD"
- help
- This option provides support for the expansion board with DCC-
- arranged address mapping that is compatible with legacy UniPhier
- reference boards.
-
- Say Y to use the on-board UART, Ether, LED devices.
-
-endchoice
-
config CMD_PINMON
bool "Enable boot mode pins monitor command"
default y
@@ -63,22 +82,4 @@
The command "ddrphy" shows the resulting parameters of DDR PHY
training; it is useful for the evaluation of DDR PHY training.
-choice
- prompt "DDR3 Frequency select"
-
-config DDR_FREQ_1600
- bool "DDR3 1600"
- depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4
-
-config DDR_FREQ_1333
- bool "DDR3 1333"
- depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8
-
-endchoice
-
-config DDR_FREQ
- int
- default 1333 if DDR_FREQ_1333
- default 1600 if DDR_FREQ_1600
-
endif
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 103db6d..b597a13 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -6,9 +6,12 @@
obj-y += lowlevel_init.o
obj-y += init_page_table.o
-obj-y += spl.o
-obj-y += memconf.o
-obj-y += ddrphy_training.o
+obj-y += boards.o
+
+obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ umc/ ddrphy/
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/
+
+obj-$(CONFIG_DEBUG_LL) += debug_ll.o
else
@@ -25,14 +28,12 @@
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o
+obj-y += pinctrl/ clk/
+
endif
obj-y += timer.o
+obj-y += soc_info.o
+obj-y += boot-mode/
-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o
-obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o
-
-obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/
-obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/
-obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/
-obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
diff --git a/arch/arm/mach-uniphier/bcu/Makefile b/arch/arm/mach-uniphier/bcu/Makefile
new file mode 100644
index 0000000..5b95bda
--- /dev/null
+++ b/arch/arm/mach-uniphier/bcu/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += bcu-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += bcu-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += bcu-ph1-ld4.o
diff --git a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c b/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c
similarity index 83%
rename from arch/arm/mach-uniphier/ph1-ld4/bcu_init.c
rename to arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c
index a7bc15e..e9d3761 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c
+++ b/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c
@@ -4,13 +4,13 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
#include <linux/io.h>
#include <mach/bcu-regs.h>
+#include <mach/init.h>
#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x))
-void bcu_init(void)
+int ph1_ld4_bcu_init(const struct uniphier_board_data *bd)
{
int shift;
@@ -21,7 +21,7 @@
writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */
/* Specify DDR channel */
- shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4;
+ shift = (bd->dram_ch1_base - bd->dram_ch0_base) / 0x04000000 * 4;
writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */
shift -= 32;
@@ -29,4 +29,6 @@
shift -= 32;
writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c b/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c
similarity index 83%
rename from arch/arm/mach-uniphier/ph1-sld3/bcu_init.c
rename to arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c
index ccc6897..cb6f862 100644
--- a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c
+++ b/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c
@@ -4,13 +4,13 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
#include <linux/io.h>
#include <mach/bcu-regs.h>
+#include <mach/init.h>
#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x))
-void bcu_init(void)
+int ph1_sld3_bcu_init(const struct uniphier_board_data *bd)
{
int shift;
@@ -25,7 +25,7 @@
writel(0x24440000, BCSCR5);
/* Specify DDR channel */
- shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4;
+ shift = (bd->dram_ch1_base - bd->dram_ch0_base) / 0x04000000 * 4;
writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */
shift -= 32;
@@ -33,4 +33,6 @@
shift -= 32;
writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/board_common.c b/arch/arm/mach-uniphier/board_common.c
index 5f2d5f6..198004b 100644
--- a/arch/arm/mach-uniphier/board_common.c
+++ b/arch/arm/mach-uniphier/board_common.c
@@ -1,32 +1,15 @@
/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <mach/led.h>
+#include <mach/micro-support-card.h>
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
int board_init(void)
{
- led_write(U, B, O, O);
+ led_puts("Uboo");
return 0;
}
-
-#if CONFIG_NR_DRAM_BANKS >= 2
-void dram_init_banksize(void)
-{
- DECLARE_GLOBAL_DATA_PTR;
-
- gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE;
- gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE;
- gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE;
- gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE;
-}
-#endif
diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c
index 7108740..5e0d246 100644
--- a/arch/arm/mach-uniphier/board_early_init_f.c
+++ b/arch/arm/mach-uniphier/board_early_init_f.c
@@ -1,27 +1,72 @@
/*
- * Copyright (C) 2012-2015 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <mach/led.h>
-#include <mach/board.h>
-
-void pin_init(void);
-void clkrst_init(void);
+#include <mach/init.h>
+#include <mach/micro-support-card.h>
+#include <mach/soc_info.h>
int board_early_init_f(void)
{
- led_write(U, 0, , );
+ led_puts("U0");
- pin_init();
+ switch (uniphier_get_soc_type()) {
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+ case SOC_UNIPHIER_PH1_SLD3:
+ ph1_sld3_pin_init();
+ led_puts("U1");
+ ph1_ld4_clk_init();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
+ case SOC_UNIPHIER_PH1_LD4:
+ ph1_ld4_pin_init();
+ led_puts("U1");
+ ph1_ld4_clk_init();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
+ case SOC_UNIPHIER_PH1_PRO4:
+ ph1_pro4_pin_init();
+ led_puts("U1");
+ ph1_pro4_clk_init();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
+ case SOC_UNIPHIER_PH1_SLD8:
+ ph1_sld8_pin_init();
+ led_puts("U1");
+ ph1_ld4_clk_init();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
+ case SOC_UNIPHIER_PH1_PRO5:
+ ph1_pro5_pin_init();
+ led_puts("U1");
+ ph1_pro5_clk_init();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
+ case SOC_UNIPHIER_PROXSTREAM2:
+ proxstream2_pin_init();
+ led_puts("U1");
+ proxstream2_clk_init();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ case SOC_UNIPHIER_PH1_LD6B:
+ ph1_ld6b_pin_init();
+ led_puts("U1");
+ proxstream2_clk_init();
+ break;
+#endif
+ default:
+ break;
+ }
- led_write(U, 1, , );
-
- clkrst_init();
-
- led_write(U, 2, , );
+ led_puts("U2");
return 0;
}
diff --git a/arch/arm/mach-uniphier/board_early_init_r.c b/arch/arm/mach-uniphier/board_early_init_r.c
index 579fe70..28c7f82 100644
--- a/arch/arm/mach-uniphier/board_early_init_r.c
+++ b/arch/arm/mach-uniphier/board_early_init_r.c
@@ -1,15 +1,14 @@
/*
- * Copyright (C) 2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <mach/board.h>
+#include <mach/micro-support-card.h>
int board_early_init_r(void)
{
- uniphier_board_late_init();
+ support_card_late_init();
return 0;
}
diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c
new file mode 100644
index 0000000..812c58f
--- /dev/null
+++ b/arch/arm/mach-uniphier/boards.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <libfdt.h>
+#include <linux/kernel.h>
+#include <mach/init.h>
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+static const struct uniphier_board_data ph1_sld3_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x20000000,
+ .dram_ch0_width = 32,
+ .dram_ch1_base = 0xc0000000,
+ .dram_ch1_size = 0x20000000,
+ .dram_ch1_width = 16,
+ .dram_ch2_base = 0xc0000000,
+ .dram_ch2_size = 0x10000000,
+ .dram_ch2_width = 16,
+ .dram_freq = 1600,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
+static const struct uniphier_board_data ph1_ld4_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x10000000,
+ .dram_ch0_width = 16,
+ .dram_ch1_base = 0x90000000,
+ .dram_ch1_size = 0x10000000,
+ .dram_ch1_width = 16,
+ .dram_freq = 1600,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
+static const struct uniphier_board_data ph1_pro4_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x20000000,
+ .dram_ch0_width = 32,
+ .dram_ch1_base = 0xa0000000,
+ .dram_ch1_size = 0x20000000,
+ .dram_ch1_width = 32,
+ .dram_freq = 1600,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
+static const struct uniphier_board_data ph1_sld8_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x10000000,
+ .dram_ch0_width = 16,
+ .dram_ch1_base = 0x90000000,
+ .dram_ch1_size = 0x10000000,
+ .dram_ch1_width = 16,
+ .dram_freq = 1333,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
+static const struct uniphier_board_data ph1_pro5_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x20000000,
+ .dram_ch0_width = 32,
+ .dram_ch1_base = 0xa0000000,
+ .dram_ch1_size = 0x20000000,
+ .dram_ch1_width = 32,
+ .dram_freq = 1866,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+static const struct uniphier_board_data proxstream2_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x40000000,
+ .dram_ch0_width = 32,
+ .dram_ch1_base = 0xc0000000,
+ .dram_ch1_size = 0x20000000,
+ .dram_ch1_width = 32,
+ .dram_ch2_base = 0xe0000000,
+ .dram_ch2_size = 0x20000000,
+ .dram_ch2_width = 16,
+ .dram_freq = 1866,
+};
+#endif
+
+struct uniphier_board_id {
+ const char *compatible;
+ const struct uniphier_board_data *param;
+};
+
+static const struct uniphier_board_id uniphier_boards[] = {
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+ { "socionext,ph1-sld3", &ph1_sld3_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
+ { "socionext,ph1-ld4", &ph1_ld4_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
+ { "socionext,ph1-pro4", &ph1_pro4_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
+ { "socionext,ph1-sld8", &ph1_sld8_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
+ { "socionext,ph1-pro5", &ph1_pro5_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
+ { "socionext,proxstream2", &proxstream2_data, },
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ { "socionext,ph1-ld6b", &proxstream2_data, },
+#endif
+};
+
+const struct uniphier_board_data *uniphier_get_board_param(const void *fdt)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(uniphier_boards); i++) {
+ if (!fdt_node_check_compatible(fdt, 0,
+ uniphier_boards[i].compatible))
+ return uniphier_boards[i].param;
+ }
+
+ return NULL;
+}
diff --git a/arch/arm/mach-uniphier/boot-mode/Makefile b/arch/arm/mach-uniphier/boot-mode/Makefile
new file mode 100644
index 0000000..30c8874
--- /dev/null
+++ b/arch/arm/mach-uniphier/boot-mode/Makefile
@@ -0,0 +1,9 @@
+obj-y += boot-mode.o
+
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += boot-mode-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += boot-mode-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += boot-mode-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += boot-mode-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += boot-mode-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += boot-mode-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += boot-mode-proxstream2.o
diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c
similarity index 87%
rename from arch/arm/mach-uniphier/ph1-pro4/boot-mode.c
rename to arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c
index 54a2510..f974d9f 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c
@@ -44,22 +44,31 @@
{BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_NONE, "Reserved"},
- { /* sentinel */ }
};
-int get_boot_mode_sel(void)
+static int get_boot_mode_sel(void)
{
return (readl(SG_PINMON0) >> 1) & 0x1f;
}
-u32 spl_boot_device(void)
+u32 ph1_ld4_boot_device(void)
{
int boot_mode;
- if (boot_is_swapped())
- return BOOT_DEVICE_NOR;
-
boot_mode = get_boot_mode_sel();
return boot_device_table[boot_mode].type;
}
+
+void ph1_ld4_boot_mode_show(void)
+{
+ int mode_sel, i;
+
+ mode_sel = get_boot_mode_sel();
+
+ puts("Boot Mode Pin:\n");
+
+ for (i = 0; i < ARRAY_SIZE(boot_device_table); i++)
+ printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i,
+ boot_device_table[i].info);
+}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c
similarity index 62%
copy from arch/arm/mach-uniphier/ph1-pro4/boot-mode.c
copy to arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c
index 54a2510..c68cb59 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,58 +8,68 @@
#include <spl.h>
#include <linux/io.h>
#include <mach/boot-device.h>
-#include <mach/sg-regs.h>
#include <mach/sbc-regs.h>
+#include <mach/sg-regs.h>
-struct boot_device_info boot_device_table[] = {
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"},
+static struct boot_device_info boot_device_table[] = {
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128MB, Addr 4)"},
+ {BOOT_DEVICE_NONE, "Reserved"},
+ {BOOT_DEVICE_NONE, "Reserved"},
+ {BOOT_DEVICE_NONE, "Reserved"},
+ {BOOT_DEVICE_NONE, "Reserved"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512MB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"},
- {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"},
+ {BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"},
{BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128MB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
{ /* sentinel */ }
};
-int get_boot_mode_sel(void)
+static int get_boot_mode_sel(void)
{
return (readl(SG_PINMON0) >> 1) & 0x1f;
}
-u32 spl_boot_device(void)
+u32 ph1_pro5_boot_device(void)
{
int boot_mode;
- if (boot_is_swapped())
- return BOOT_DEVICE_NOR;
-
boot_mode = get_boot_mode_sel();
return boot_device_table[boot_mode].type;
}
+
+void ph1_pro5_boot_mode_show(void)
+{
+ int mode_sel, i;
+
+ mode_sel = get_boot_mode_sel();
+
+ puts("Boot Mode Pin:\n");
+
+ for (i = 0; i < ARRAY_SIZE(boot_device_table); i++)
+ printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i,
+ boot_device_table[i].info);
+}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c
similarity index 89%
rename from arch/arm/mach-uniphier/ph1-sld3/boot-mode.c
rename to arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c
index 40000af..c943e12 100644
--- a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c
@@ -11,7 +11,7 @@
#include <mach/sg-regs.h>
#include <mach/sbc-regs.h>
-struct boot_device_info boot_device_table[] = {
+static struct boot_device_info boot_device_table[] = {
{BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_NONE, "External Master"},
{BOOT_DEVICE_NONE, "Reserved"},
@@ -76,22 +76,31 @@
{BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_NONE, "Reserved"},
- { /* sentinel */ }
};
-int get_boot_mode_sel(void)
+static int get_boot_mode_sel(void)
{
return readl(SG_PINMON0) & 0x3f;
}
-u32 spl_boot_device(void)
+u32 ph1_sld3_boot_device(void)
{
int boot_mode;
- if (boot_is_swapped())
- return BOOT_DEVICE_NOR;
-
boot_mode = get_boot_mode_sel();
return boot_device_table[boot_mode].type;
}
+
+void ph1_sld3_boot_mode_show(void)
+{
+ int mode_sel, i;
+
+ mode_sel = get_boot_mode_sel();
+
+ puts("Boot Mode Pin:\n");
+
+ for (i = 0; i < ARRAY_SIZE(boot_device_table); i++)
+ printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i,
+ boot_device_table[i].info);
+}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
similarity index 60%
copy from arch/arm/mach-uniphier/ph1-pro4/boot-mode.c
copy to arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
index 54a2510..10a47c6 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,10 +8,11 @@
#include <spl.h>
#include <linux/io.h>
#include <mach/boot-device.h>
-#include <mach/sg-regs.h>
+#include <mach/init.h>
#include <mach/sbc-regs.h>
+#include <mach/sg-regs.h>
-struct boot_device_info boot_device_table[] = {
+static struct boot_device_info boot_device_table[] = {
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"},
@@ -19,32 +20,31 @@
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 4)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"},
+ {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"},
{BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"},
- {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"},
- {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"},
- {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"},
+ {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"},
+ {BOOT_DEVICE_SPI, "SPI 3Byte CS0"},
+ {BOOT_DEVICE_SPI, "SPI 4Byte CS0"},
+ {BOOT_DEVICE_SPI, "SPI 3Byte CS1"},
+ {BOOT_DEVICE_SPI, "SPI 4Byte CS1"},
+ {BOOT_DEVICE_SPI, "SPI 4Byte CS0"},
+ {BOOT_DEVICE_SPI, "SPI 3Byte CS0"},
{BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, "Reserved"},
- { /* sentinel */ }
};
int get_boot_mode_sel(void)
@@ -52,14 +52,24 @@
return (readl(SG_PINMON0) >> 1) & 0x1f;
}
-u32 spl_boot_device(void)
+u32 proxstream2_boot_device(void)
{
int boot_mode;
- if (boot_is_swapped())
- return BOOT_DEVICE_NOR;
-
boot_mode = get_boot_mode_sel();
return boot_device_table[boot_mode].type;
}
+
+void proxstream2_boot_mode_show(void)
+{
+ int mode_sel, i;
+
+ mode_sel = get_boot_mode_sel();
+
+ puts("Boot Mode Pin:\n");
+
+ for (i = 0; i < ARRAY_SIZE(boot_device_table); i++)
+ printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i,
+ boot_device_table[i].info);
+}
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c
new file mode 100644
index 0000000..c6cafa7
--- /dev/null
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/io.h>
+#include <mach/boot-device.h>
+#include <mach/sbc-regs.h>
+#include <mach/soc_info.h>
+
+u32 spl_boot_device(void)
+{
+ if (boot_is_swapped())
+ return BOOT_DEVICE_NOR;
+
+ switch (uniphier_get_soc_type()) {
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+ case SOC_UNIPHIER_PH1_SLD3:
+ return ph1_sld3_boot_device();
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
+ case SOC_UNIPHIER_PH1_LD4:
+ case SOC_UNIPHIER_PH1_PRO4:
+ case SOC_UNIPHIER_PH1_SLD8:
+ return ph1_ld4_boot_device();
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
+ case SOC_UNIPHIER_PH1_PRO5:
+ return ph1_pro5_boot_device();
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ case SOC_UNIPHIER_PROXSTREAM2:
+ case SOC_UNIPHIER_PH1_LD6B:
+ return proxstream2_boot_device();
+#endif
+ default:
+ return BOOT_DEVICE_NONE;
+ }
+}
diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile
new file mode 100644
index 0000000..4f397b9
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += clk-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += clk-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += clk-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += clk-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += clk-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += clk-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += clk-proxstream2.o
diff --git a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c
similarity index 93%
rename from arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c
rename to arch/arm/mach-uniphier/clk/clk-ph1-ld4.c
index 2de81f0..8b95fbb 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c
+++ b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c
@@ -5,9 +5,10 @@
*/
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
-void clkrst_init(void)
+void ph1_ld4_clk_init(void)
{
u32 tmp;
diff --git a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c
similarity index 95%
rename from arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c
rename to arch/arm/mach-uniphier/clk/clk-ph1-pro4.c
index 46cace7..2e1b20a 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c
+++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c
@@ -5,9 +5,10 @@
*/
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
-void clkrst_init(void)
+void ph1_pro4_clk_init(void)
{
u32 tmp;
diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c
new file mode 100644
index 0000000..f78edbb
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+
+void ph1_pro5_clk_init(void)
+{
+ u32 tmp;
+
+ /* deassert reset */
+ tmp = readl(SC_RSTCTRL);
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_RSTCTRL_NRST_NAND;
+#endif
+ writel(tmp, SC_RSTCTRL);
+ readl(SC_RSTCTRL); /* dummy read */
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ tmp = readl(SC_RSTCTRL2);
+ tmp |= SC_RSTCTRL2_NRST_USB3B1;
+ writel(tmp, SC_RSTCTRL2);
+ readl(SC_RSTCTRL2); /* dummy read */
+#endif
+
+ /* privide clocks */
+ tmp = readl(SC_CLKCTRL);
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
+ SC_CLKCTRL_CEN_GIO;
+#endif
+#ifdef CONFIG_NAND_DENALI
+ tmp |= SC_CLKCTRL_CEN_NAND;
+#endif
+ writel(tmp, SC_CLKCTRL);
+ readl(SC_CLKCTRL); /* dummy read */
+}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c b/arch/arm/mach-uniphier/clk/clk-proxstream2.c
similarity index 68%
copy from arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c
copy to arch/arm/mach-uniphier/clk/clk-proxstream2.c
index 46cace7..b494021 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c
+++ b/arch/arm/mach-uniphier/clk/clk-proxstream2.c
@@ -1,28 +1,25 @@
/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
-void clkrst_init(void)
+void proxstream2_clk_init(void)
{
u32 tmp;
/* deassert reset */
tmp = readl(SC_RSTCTRL);
#ifdef CONFIG_USB_XHCI_UNIPHIER
- tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 |
- SC_RSTCTRL_NRST_GIO;
+ tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO;
#endif
#ifdef CONFIG_UNIPHIER_ETH
tmp |= SC_RSTCTRL_NRST_ETHER;
#endif
-#ifdef CONFIG_USB_EHCI_UNIPHIER
- tmp |= SC_RSTCTRL_NRST_STDMAC;
-#endif
#ifdef CONFIG_NAND_DENALI
tmp |= SC_RSTCTRL_NRST_NAND;
#endif
@@ -31,7 +28,7 @@
#ifdef CONFIG_USB_XHCI_UNIPHIER
tmp = readl(SC_RSTCTRL2);
- tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1;
+ tmp |= SC_RSTCTRL2_NRST_USB3B1;
writel(tmp, SC_RSTCTRL2);
readl(SC_RSTCTRL2); /* dummy read */
#endif
@@ -45,9 +42,6 @@
#ifdef CONFIG_UNIPHIER_ETH
tmp |= SC_CLKCTRL_CEN_ETHER;
#endif
-#ifdef CONFIG_USB_EHCI_UNIPHIER
- tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC;
-#endif
#ifdef CONFIG_NAND_DENALI
tmp |= SC_CLKCTRL_CEN_NAND;
#endif
diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c b/arch/arm/mach-uniphier/cmd_pinmon.c
index 8be2ed4..b15ee9d 100644
--- a/arch/arm/mach-uniphier/cmd_pinmon.c
+++ b/arch/arm/mach-uniphier/cmd_pinmon.c
@@ -1,6 +1,5 @@
/*
- * Copyright (C) 2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,20 +7,42 @@
#include <common.h>
#include <mach/boot-device.h>
#include <mach/sbc-regs.h>
+#include <mach/soc_info.h>
static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int mode_sel, i;
-
printf("Boot Swap: %s\n\n", boot_is_swapped() ? "ON" : "OFF");
- mode_sel = get_boot_mode_sel();
-
- puts("Boot Mode Pin:\n");
-
- for (i = 0; boot_device_table[i].info; i++)
- printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i,
- boot_device_table[i].info);
+ switch (uniphier_get_soc_type()) {
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+ case SOC_UNIPHIER_PH1_SLD3:
+ ph1_sld3_boot_mode_show();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
+ case SOC_UNIPHIER_PH1_LD4:
+ case SOC_UNIPHIER_PH1_PRO4:
+ case SOC_UNIPHIER_PH1_SLD8:
+ ph1_ld4_boot_mode_show();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
+ case SOC_UNIPHIER_PH1_PRO5:
+ ph1_pro5_boot_mode_show();
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ case SOC_UNIPHIER_PROXSTREAM2:
+ case SOC_UNIPHIER_PH1_LD6B:
+ proxstream2_boot_mode_show();
+ break;
+#endif
+ default:
+ break;
+ }
return 0;
}
diff --git a/arch/arm/mach-uniphier/ddrphy/Makefile b/arch/arm/mach-uniphier/ddrphy/Makefile
new file mode 100644
index 0000000..e2d109d
--- /dev/null
+++ b/arch/arm/mach-uniphier/ddrphy/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += ddrphy-training.o ddrphy-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += ddrphy-training.o ddrphy-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += ddrphy-training.o ddrphy-ph1-sld8.o
diff --git a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c
similarity index 94%
rename from arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c
rename to arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c
index 2add8fa..991d929 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c
+++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c
@@ -8,7 +8,7 @@
#include <linux/io.h>
#include <mach/ddrphy-regs.h>
-void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
{
u32 tmp;
@@ -67,4 +67,6 @@
writel(0x0300C473, &phy->pgcr[1]);
writel(0x0000005D, &phy->zq[0].cr[1]);
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c
similarity index 94%
rename from arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c
rename to arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c
index 61ddcf4..bc47ba3 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c
+++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c
@@ -8,7 +8,7 @@
#include <linux/io.h>
#include <mach/ddrphy-regs.h>
-void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
{
u32 tmp;
@@ -67,4 +67,6 @@
writel(0x0300C473, &phy->pgcr[1]);
writel(0x0000005D, &phy->zq[0].cr[1]);
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c
similarity index 94%
rename from arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c
rename to arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c
index 21efe62..39024a0 100644
--- a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c
+++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c
@@ -9,7 +9,7 @@
#include <linux/io.h>
#include <mach/ddrphy-regs.h>
-void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
{
u32 tmp;
@@ -72,4 +72,6 @@
writel(0x0300C473, &phy->pgcr[1]);
writel(0x0000005D, &phy->zq[0].cr[1]);
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ddrphy_training.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-training.c
similarity index 100%
rename from arch/arm/mach-uniphier/ddrphy_training.c
rename to arch/arm/mach-uniphier/ddrphy/ddrphy-training.c
diff --git a/arch/arm/mach-uniphier/debug_ll.S b/arch/arm/mach-uniphier/debug_ll.S
new file mode 100644
index 0000000..d8c9fe4
--- /dev/null
+++ b/arch/arm/mach-uniphier/debug_ll.S
@@ -0,0 +1,185 @@
+/*
+ * On-chip UART initializaion for low-level debugging
+ *
+ * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/linkage.h>
+#include <mach/bcu-regs.h>
+#include <mach/sc-regs.h>
+#include <mach/sg-regs.h>
+
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
+
+#define BAUDRATE 115200
+#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d))
+
+ENTRY(debug_ll_init)
+ ldr r0, =SG_REVISION
+ ldr r1, [r0]
+ and r1, r1, #SG_REVISION_TYPE_MASK
+ mov r1, r1, lsr #SG_REVISION_TYPE_SHIFT
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+#define PH1_SLD3_UART_CLK 36864000
+ cmp r1, #0x25
+ bne ph1_sld3_end
+
+ sg_set_pinsel 64, 1, 4, 4, r0, r1 @ TXD0 -> TXD0
+
+ ldr r0, =BCSCR5
+ ldr r1, =0x24440000
+ str r1, [r0]
+
+ ldr r0, =SC_CLKCTRL
+ ldr r1, [r0]
+ orr r1, r1, #SC_CLKCTRL_CEN_PERI
+ str r1, [r0]
+
+ ldr r3, =DIV_ROUND(PH1_SLD3_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+ph1_sld3_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
+#define PH1_LD4_UART_CLK 36864000
+ cmp r1, #0x26
+ bne ph1_ld4_end
+
+ ldr r0, =SG_IECTRL
+ ldr r1, [r0]
+ orr r1, r1, #1
+ str r1, [r0]
+
+ sg_set_pinsel 88, 1, 8, 4, r0, r1 @ HSDOUT6 -> TXD0
+
+ ldr r3, =DIV_ROUND(PH1_LD4_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+ph1_ld4_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
+#define PH1_PRO4_UART_CLK 73728000
+ cmp r1, #0x28
+ bne ph1_pro4_end
+
+ sg_set_pinsel 128, 0, 4, 8, r0, r1 @ TXD0 -> TXD0
+
+ ldr r0, =SG_LOADPINCTRL
+ mov r1, #1
+ str r1, [r0]
+
+ ldr r0, =SC_CLKCTRL
+ ldr r1, [r0]
+ orr r1, r1, #SC_CLKCTRL_CEN_PERI
+ str r1, [r0]
+
+ ldr r3, =DIV_ROUND(PH1_PRO4_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+ph1_pro4_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
+#define PH1_SLD8_UART_CLK 80000000
+ cmp r1, #0x29
+ bne ph1_sld8_end
+
+ ldr r0, =SG_IECTRL
+ ldr r1, [r0]
+ orr r1, r1, #1
+ str r1, [r0]
+
+ sg_set_pinsel 70, 3, 8, 4, r0, r1 @ HSDOUT0 -> TXD0
+
+ ldr r3, =DIV_ROUND(PH1_SLD8_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+ph1_sld8_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
+#define PH1_PRO5_UART_CLK 73728000
+ cmp r1, #0x2A
+ bne ph1_pro5_end
+
+ sg_set_pinsel 47, 0, 4, 8, r0, r1 @ TXD0 -> TXD0
+ sg_set_pinsel 49, 0, 4, 8, r0, r1 @ TXD1 -> TXD1
+ sg_set_pinsel 51, 0, 4, 8, r0, r1 @ TXD2 -> TXD2
+ sg_set_pinsel 53, 0, 4, 8, r0, r1 @ TXD3 -> TXD3
+
+ ldr r0, =SG_LOADPINCTRL
+ mov r1, #1
+ str r1, [r0]
+
+ ldr r0, =SC_CLKCTRL
+ ldr r1, [r0]
+ orr r1, r1, #SC_CLKCTRL_CEN_PERI
+ str r1, [r0]
+
+ ldr r3, =DIV_ROUND(PH1_PRO5_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+ph1_pro5_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
+#define PROXSTREAM2_UART_CLK 88900000
+ cmp r1, #0x2E
+ bne proxstream2_end
+
+ ldr r0, =SG_IECTRL
+ ldr r1, [r0]
+ orr r1, r1, #1
+ str r1, [r0]
+
+ sg_set_pinsel 217, 8, 8, 4, r0, r1 @ TXD0 -> TXD0
+ sg_set_pinsel 115, 8, 8, 4, r0, r1 @ TXD1 -> TXD1
+ sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2
+ sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3
+
+ ldr r0, =SC_CLKCTRL
+ ldr r1, [r0]
+ orr r1, r1, #SC_CLKCTRL_CEN_PERI
+ str r1, [r0]
+
+ ldr r3, =DIV_ROUND(PROXSTREAM2_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+proxstream2_end:
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+#define PH1_LD6B_UART_CLK 88900000
+ cmp r1, #0x2F
+ bne ph1_ld6b_end
+
+ ldr r0, =SG_IECTRL
+ ldr r1, [r0]
+ orr r1, r1, #1
+ str r1, [r0]
+
+ sg_set_pinsel 135, 3, 8, 4, r0, r1 @ PORT10 -> TXD0
+ sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1
+ sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2
+
+ ldr r0, =SC_CLKCTRL
+ ldr r1, [r0]
+ orr r1, r1, #SC_CLKCTRL_CEN_PERI
+ str r1, [r0]
+
+ ldr r3, =DIV_ROUND(PH1_LD6B_UART_CLK, 16 * BAUDRATE)
+
+ b init_uart
+ph1_ld6b_end:
+#endif
+
+init_uart:
+ addruart r0, r1, r2
+ mov r1, #UART_LCR_WLEN8 << 8
+ str r1, [r0, #0x10]
+ str r3, [r0, #0x24]
+
+ mov pc, lr
+ENDPROC(debug_ll_init)
diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c
index 4b8c938..32cc448 100644
--- a/arch/arm/mach-uniphier/dram_init.c
+++ b/arch/arm/mach-uniphier/dram_init.c
@@ -1,16 +1,59 @@
/*
- * Copyright (C) 2012-2015 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <libfdt.h>
+#include <linux/err.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const void *get_memory_reg_prop(const void *fdt, int *lenp)
+{
+ int offset;
+
+ offset = fdt_path_offset(fdt, "/memory");
+ if (offset < 0)
+ return NULL;
+
+ return fdt_getprop(fdt, offset, "reg", lenp);
+}
int dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
- gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ const fdt32_t *val;
+ int len;
+
+ val = get_memory_reg_prop(gd->fdt_blob, &len);
+ if (len < sizeof(*val))
+ return -EINVAL;
+
+ gd->ram_size = fdt32_to_cpu(*(val + 1));
+
+ debug("DRAM size = %08lx\n", gd->ram_size);
return 0;
}
+
+void dram_init_banksize(void)
+{
+ const fdt32_t *val;
+ int len, i;
+
+ val = get_memory_reg_prop(gd->fdt_blob, &len);
+ if (len < 0)
+ return;
+
+ len /= sizeof(*val);
+ len /= 2;
+
+ for (i = 0; i < len; i++) {
+ gd->bd->bi_dram[i].start = fdt32_to_cpu(*val++);
+ gd->bd->bi_dram[i].size = fdt32_to_cpu(*val++);
+
+ debug("DRAM bank %d: start = %08lx, size = %08lx\n",
+ i, gd->bd->bi_dram[i].start, gd->bd->bi_dram[i].size);
+ }
+}
diff --git a/arch/arm/mach-uniphier/early-clk/Makefile b/arch/arm/mach-uniphier/early-clk/Makefile
new file mode 100644
index 0000000..393ea96
--- /dev/null
+++ b/arch/arm/mach-uniphier/early-clk/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-clk-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += early-clk-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += early-clk-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += early-clk-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += early-clk-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += early-clk-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += early-clk-proxstream2.o
diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c
similarity index 85%
rename from arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c
rename to arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c
index 60204b5..f646c9b 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c
+++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c
@@ -7,9 +7,10 @@
#include <common.h>
#include <spl.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
-void early_clkrst_init(void)
+int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd)
{
u32 tmp;
@@ -27,4 +28,6 @@
tmp |= SC_CLKCTRL_CEN_UMC | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
writel(tmp, SC_CLKCTRL);
readl(SC_CLKCTRL); /* dummy read */
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c
new file mode 100644
index 0000000..007d3b8
--- /dev/null
+++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+
+int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd)
+{
+ u32 tmp;
+
+ /*
+ * deassert reset
+ * UMCA2: Ch1 (DDR3)
+ * UMCA1, UMC31: Ch0 (WIO1)
+ * UMCA0, UMC30: Ch0 (WIO0)
+ */
+ tmp = readl(SC_RSTCTRL4);
+ tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 |
+ SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 |
+ SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30;
+ writel(tmp, SC_RSTCTRL4);
+ readl(SC_RSTCTRL); /* dummy read */
+
+ /* privide clocks */
+ tmp = readl(SC_CLKCTRL);
+ tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
+ writel(tmp, SC_CLKCTRL);
+ tmp = readl(SC_CLKCTRL4);
+ tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC1 |
+ SC_CLKCTRL4_CEN_UMC0;
+ writel(tmp, SC_CLKCTRL4);
+ readl(SC_CLKCTRL4); /* dummy read */
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c
new file mode 100644
index 0000000..c303f16
--- /dev/null
+++ b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sc-regs.h>
+
+int proxstream2_early_clk_init(const struct uniphier_board_data *bd)
+{
+ u32 tmp;
+
+ /* deassert reset */
+ if (spl_boot_device() != BOOT_DEVICE_NAND) {
+ tmp = readl(SC_RSTCTRL);
+ tmp &= ~SC_RSTCTRL_NRST_NAND;
+ writel(tmp, SC_RSTCTRL);
+ };
+
+ tmp = readl(SC_RSTCTRL4);
+ tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 |
+ SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 |
+ SC_RSTCTRL4_NRST_UMC32 | SC_RSTCTRL4_NRST_UMC31 |
+ SC_RSTCTRL4_NRST_UMC30;
+ writel(tmp, SC_RSTCTRL4);
+ readl(SC_RSTCTRL4); /* dummy read */
+
+ /* privide clocks */
+ tmp = readl(SC_CLKCTRL);
+ tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
+ writel(tmp, SC_CLKCTRL);
+
+ tmp = readl(SC_CLKCTRL4);
+ tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC2 |
+ SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0;
+ writel(tmp, SC_CLKCTRL4);
+ readl(SC_CLKCTRL4); /* dummy read */
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/early-pinctrl/Makefile b/arch/arm/mach-uniphier/early-pinctrl/Makefile
new file mode 100644
index 0000000..e497d28f7
--- /dev/null
+++ b/arch/arm/mach-uniphier/early-pinctrl/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-pinctrl-ph1-sld3.o
diff --git a/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c
new file mode 100644
index 0000000..1bb9375
--- /dev/null
+++ b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_UNIPHIER_SERIAL
+ sg_set_pinsel(63, 0, 4, 4); /* RXD0 */
+ sg_set_pinsel(64, 1, 4, 4); /* TXD0 */
+
+ sg_set_pinsel(65, 0, 4, 4); /* RXD1 */
+ sg_set_pinsel(66, 1, 4, 4); /* TXD1 */
+
+ sg_set_pinsel(96, 2, 4, 4); /* RXD2 */
+ sg_set_pinsel(102, 2, 4, 4); /* TXD2 */
+#endif
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h
deleted file mode 100644
index e3cba5b..0000000
--- a/arch/arm/mach-uniphier/include/mach/board.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef ARCH_BOARD_H
-#define ARCH_BOARD_H
-
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \
- defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-void support_card_reset(void);
-void support_card_init(void);
-void support_card_late_init(void);
-int check_support_card(void);
-#else
-#define support_card_reset() do {} while (0)
-#define support_card_init() do {} while (0)
-#define support_card_late_init() do {} while (0)
-static inline int check_support_card(void)
-{
- return 0;
-}
-#endif
-
-static inline void uniphier_board_reset(void)
-{
- support_card_reset();
-}
-
-static inline void uniphier_board_init(void)
-{
- support_card_init();
-}
-
-static inline void uniphier_board_late_init(void)
-{
- support_card_late_init();
-}
-
-#endif /* ARCH_BOARD_H */
diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h b/arch/arm/mach-uniphier/include/mach/boot-device.h
index 7a10f1c..2ab5a53 100644
--- a/arch/arm/mach-uniphier/include/mach/boot-device.h
+++ b/arch/arm/mach-uniphier/include/mach/boot-device.h
@@ -1,6 +1,5 @@
/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,13 +7,19 @@
#ifndef _ASM_BOOT_DEVICE_H_
#define _ASM_BOOT_DEVICE_H_
-int get_boot_mode_sel(void);
-
struct boot_device_info {
u32 type;
char *info;
};
-extern struct boot_device_info boot_device_table[];
+u32 ph1_sld3_boot_device(void);
+u32 ph1_ld4_boot_device(void);
+u32 ph1_pro5_boot_device(void);
+u32 proxstream2_boot_device(void);
+
+void ph1_sld3_boot_mode_show(void);
+void ph1_ld4_boot_mode_show(void);
+void ph1_pro5_boot_mode_show(void);
+void proxstream2_boot_mode_show(void);
#endif /* _ASM_BOOT_DEVICE_H_ */
diff --git a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h
index fce0c01..adcc972 100644
--- a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h
@@ -156,7 +156,8 @@
/* SoC-specific parameters */
#define NR_DATX8_PER_DDRPHY 2
-#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
#define NR_DDRPHY_PER_CH 1
#else
#define NR_DDRPHY_PER_CH 2
@@ -167,7 +168,9 @@
#define DDRPHY_BASE(ch, phy) (0x5bc01000 + 0x200000 * (ch) + 0x1000 * (phy))
#ifndef __ASSEMBLY__
-void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size);
+int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size);
+int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size);
+int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size);
void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank);
int ddrphy_training(struct ddrphy __iomem *phy);
#endif
diff --git a/arch/arm/mach-uniphier/include/mach/debug-uart.S b/arch/arm/mach-uniphier/include/mach/debug-uart.S
deleted file mode 100644
index d2b431f..0000000
--- a/arch/arm/mach-uniphier/include/mach/debug-uart.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/serial_reg.h>
-
-#if !defined(CONFIG_DEBUG_SEMIHOSTING)
-#include CONFIG_DEBUG_LL_INCLUDE
-#endif
-
-#define BAUDRATE 115200
-#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d))
-#define DIVISOR DIV_ROUND(UART_CLK, 16 * BAUDRATE)
-
- .macro init_debug_uart, ra, rb, rc
- addruart \ra, \rb, \rc
- mov \rb, #UART_LCR_WLEN8 << 8
- str \rb, [\ra, #0x10]
- ldr \rb, =DIVISOR
- str \rb, [\ra, #0x24]
- .endm
diff --git a/arch/arm/mach-uniphier/include/mach/init.h b/arch/arm/mach-uniphier/include/mach/init.h
new file mode 100644
index 0000000..5108edd
--- /dev/null
+++ b/arch/arm/mach-uniphier/include/mach/init.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MACH_INIT_H
+#define __MACH_INIT_H
+
+struct uniphier_board_data {
+ unsigned long dram_ch0_base;
+ unsigned long dram_ch0_size;
+ unsigned long dram_ch0_width;
+ unsigned long dram_ch1_base;
+ unsigned long dram_ch1_size;
+ unsigned long dram_ch1_width;
+ unsigned long dram_ch2_base;
+ unsigned long dram_ch2_size;
+ unsigned long dram_ch2_width;
+ unsigned int dram_freq;
+};
+
+const struct uniphier_board_data *uniphier_get_board_param(const void *fdt);
+
+int ph1_sld3_init(const struct uniphier_board_data *bd);
+int ph1_ld4_init(const struct uniphier_board_data *bd);
+int ph1_pro4_init(const struct uniphier_board_data *bd);
+int ph1_sld8_init(const struct uniphier_board_data *bd);
+int ph1_pro5_init(const struct uniphier_board_data *bd);
+int proxstream2_init(const struct uniphier_board_data *bd);
+
+#if defined(CONFIG_MICRO_SUPPORT_CARD)
+int ph1_sld3_sbc_init(const struct uniphier_board_data *bd);
+int ph1_ld4_sbc_init(const struct uniphier_board_data *bd);
+int ph1_pro4_sbc_init(const struct uniphier_board_data *bd);
+int proxstream2_sbc_init(const struct uniphier_board_data *bd);
+#else
+static inline int ph1_sld3_sbc_init(const struct uniphier_board_data *bd)
+{
+ return 0;
+}
+
+static inline int ph1_ld4_sbc_init(const struct uniphier_board_data *bd)
+{
+ return 0;
+}
+
+static inline int ph1_pro4_sbc_init(const struct uniphier_board_data *bd)
+{
+ return 0;
+}
+
+static inline int proxstream2_sbc_init(const struct uniphier_board_data *bd)
+{
+ return 0;
+}
+#endif
+
+int ph1_sld3_bcu_init(const struct uniphier_board_data *bd);
+int ph1_ld4_bcu_init(const struct uniphier_board_data *bd);
+
+int memconf_init(const struct uniphier_board_data *bd);
+int ph1_sld3_memconf_init(const struct uniphier_board_data *bd);
+int proxstream2_memconf_init(const struct uniphier_board_data *bd);
+
+int ph1_sld3_pll_init(const struct uniphier_board_data *bd);
+int ph1_ld4_pll_init(const struct uniphier_board_data *bd);
+int ph1_pro4_pll_init(const struct uniphier_board_data *bd);
+int ph1_sld8_pll_init(const struct uniphier_board_data *bd);
+
+int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd);
+int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd);
+
+int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd);
+int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd);
+int proxstream2_early_clk_init(const struct uniphier_board_data *bd);
+
+int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd);
+
+int ph1_ld4_umc_init(const struct uniphier_board_data *bd);
+int ph1_pro4_umc_init(const struct uniphier_board_data *bd);
+int ph1_sld8_umc_init(const struct uniphier_board_data *bd);
+
+void ph1_sld3_pin_init(void);
+void ph1_ld4_pin_init(void);
+void ph1_pro4_pin_init(void);
+void ph1_sld8_pin_init(void);
+void ph1_pro5_pin_init(void);
+void proxstream2_pin_init(void);
+void ph1_ld6b_pin_init(void);
+
+void ph1_ld4_clk_init(void);
+void ph1_pro4_clk_init(void);
+void ph1_pro5_clk_init(void);
+void proxstream2_clk_init(void);
+
+#define pr_err(fmt, args...) printf(fmt, ##args)
+
+#endif /* __MACH_INIT_H */
diff --git a/arch/arm/mach-uniphier/include/mach/led.h b/arch/arm/mach-uniphier/include/mach/led.h
deleted file mode 100644
index f7749b4..0000000
--- a/arch/arm/mach-uniphier/include/mach/led.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef ARCH_LED_H
-#define ARCH_LED_H
-
-#include <config.h>
-
-#define LED_CHAR_0 0x7e
-#define LED_CHAR_1 0x0c
-#define LED_CHAR_2 0xb6
-#define LED_CHAR_3 0x9e
-#define LED_CHAR_4 0xcc
-#define LED_CHAR_5 0xda
-#define LED_CHAR_6 0xfa
-#define LED_CHAR_7 0x4e
-#define LED_CHAR_8 0xfe
-#define LED_CHAR_9 0xde
-
-#define LED_CHAR_A 0xee
-#define LED_CHAR_B 0xf8
-#define LED_CHAR_C 0x72
-#define LED_CHAR_D 0xbc
-#define LED_CHAR_E 0xf2
-#define LED_CHAR_F 0xe2
-#define LED_CHAR_G 0x7a
-#define LED_CHAR_H 0xe8
-#define LED_CHAR_I 0x08
-#define LED_CHAR_J 0x3c
-#define LED_CHAR_K 0xea
-#define LED_CHAR_L 0x70
-#define LED_CHAR_M 0x6e
-#define LED_CHAR_N 0xa8
-#define LED_CHAR_O 0xb8
-#define LED_CHAR_P 0xe6
-#define LED_CHAR_Q 0xce
-#define LED_CHAR_R 0xa0
-#define LED_CHAR_S 0xc8
-#define LED_CHAR_T 0x8c
-#define LED_CHAR_U 0x7c
-#define LED_CHAR_V 0x54
-#define LED_CHAR_W 0xfc
-#define LED_CHAR_X 0xec
-#define LED_CHAR_Y 0xdc
-#define LED_CHAR_Z 0xa4
-
-#define LED_CHAR_SPACE 0x00
-#define LED_CHAR_DOT 0x01
-
-#define LED_CHAR_ (LED_CHAR_SPACE)
-
-/** Macro to translate 4 characters into integer to display led */
-#define LED_C2I(C0, C1, C2, C3) \
- (~( \
- (LED_CHAR_##C0 << 24) | \
- (LED_CHAR_##C1 << 16) | \
- (LED_CHAR_##C2 << 8) | \
- (LED_CHAR_##C3) \
- ))
-
-#if defined(CONFIG_SUPPORT_CARD_LED_BASE)
-
-#define LED_ADDR CONFIG_SUPPORT_CARD_LED_BASE
-
-#ifdef __ASSEMBLY__
-
-#define led_write(C0, C1, C2, C3) raw_led_write LED_C2I(C0, C1, C2, C3)
-.macro raw_led_write data
- ldr r0, =\data
- ldr r1, =LED_ADDR
- str r0, [r1]
-.endm
-
-#else /* __ASSEMBLY__ */
-
-#include <linux/io.h>
-
-#define led_write(C0, C1, C2, C3) \
-do { \
- raw_led_write(LED_C2I(C0, C1, C2, C3)); \
-} while (0)
-
-static inline void raw_led_write(u32 data)
-{
- writel(data, LED_ADDR);
-}
-
-#endif /* __ASSEMBLY__ */
-
-#else /* CONFIG_SUPPORT_CARD_LED_BASE */
-
-#define led_write(C0, C1, C2, C3)
-#define raw_led_write(x)
-
-#endif /* CONFIG_SUPPORT_CARD_LED_BASE */
-
-#endif /* ARCH_LED_H */
diff --git a/arch/arm/mach-uniphier/include/mach/micro-support-card.h b/arch/arm/mach-uniphier/include/mach/micro-support-card.h
new file mode 100644
index 0000000..5da0ada
--- /dev/null
+++ b/arch/arm/mach-uniphier/include/mach/micro-support-card.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef ARCH_BOARD_H
+#define ARCH_BOARD_H
+
+#if defined(CONFIG_MICRO_SUPPORT_CARD)
+void support_card_reset(void);
+void support_card_init(void);
+void support_card_late_init(void);
+int check_support_card(void);
+void led_puts(const char *s);
+#else
+static inline void support_card_reset(void)
+{
+}
+
+static inline void support_card_init(void)
+{
+}
+
+static inline void support_card_late_init(void)
+{
+}
+
+static inline int check_support_card(void)
+{
+ return 0;
+}
+
+static inline void led_puts(const char *s)
+{
+}
+#endif
+
+#endif /* ARCH_BOARD_H */
diff --git a/arch/arm/mach-uniphier/include/mach/platdevice.h b/arch/arm/mach-uniphier/include/mach/platdevice.h
deleted file mode 100644
index cdf7d13..0000000
--- a/arch/arm/mach-uniphier/include/mach/platdevice.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef ARCH_PLATDEVICE_H
-#define ARCH_PLATDEVICE_H
-
-#include <dm/platdata.h>
-#include <dm/platform_data/serial-uniphier.h>
-
-#define SERIAL_DEVICE(n, ba, clk) \
-static struct uniphier_serial_platform_data serial_device##n = { \
- .base = ba, \
- .uartclk = clk \
-}; \
-U_BOOT_DEVICE(serial##n) = { \
- .name = DRIVER_NAME, \
- .platdata = &serial_device##n \
-};
-
-#endif /* ARCH_PLATDEVICE_H */
diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h
index df50294..474b82d 100644
--- a/arch/arm/mach-uniphier/include/mach/sc-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h
@@ -9,12 +9,16 @@
#ifndef ARCH_SC_REGS_H
#define ARCH_SC_REGS_H
-#if defined(CONFIG_MACH_PH1_SLD3)
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
#define SC_BASE_ADDR 0xf1840000
#else
#define SC_BASE_ADDR 0x61840000
#endif
+#define SC_DPLLOSCCTRL (SC_BASE_ADDR | 0x1110)
+#define SC_DPLLOSCCTRL_DPLLST (0x1 << 1)
+#define SC_DPLLOSCCTRL_DPLLEN (0x1 << 0)
+
#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200)
#define SC_DPLLCTRL_SSC_EN (0x1 << 31)
#define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16)
@@ -43,6 +47,7 @@
#define SC_RSTCTRL_NRST_ETHER (0x1 << 12)
#define SC_RSTCTRL_NRST_STDMAC (0x1 << 10)
#define SC_RSTCTRL_NRST_GIO (0x1 << 6)
+/* Pro4 or older */
#define SC_RSTCTRL_NRST_UMC1 (0x1 << 5)
#define SC_RSTCTRL_NRST_UMC0 (0x1 << 4)
#define SC_RSTCTRL_NRST_NAND (0x1 << 2)
@@ -53,6 +58,16 @@
#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008)
+/* Pro5 or newer */
+#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c)
+#define SC_RSTCTRL4_NRST_UMCSB (0x1 << 12) /* UMC system bus */
+#define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */
+#define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */
+#define SC_RSTCTRL4_NRST_UMCA0 (0x1 << 8) /* UMC ch0 standby */
+#define SC_RSTCTRL4_NRST_UMC32 (0x1 << 6) /* UMC ch2 */
+#define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */
+#define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */
+
#define SC_CLKCTRL (SC_BASE_ADDR | 0x2104)
#define SC_CLKCTRL_CEN_USB31 (0x1 << 17) /* USB3 #1 */
#define SC_CLKCTRL_CEN_USB30 (0x1 << 16) /* USB3 #0 */
@@ -60,11 +75,19 @@
#define SC_CLKCTRL_CEN_MIO (0x1 << 11)
#define SC_CLKCTRL_CEN_STDMAC (0x1 << 10)
#define SC_CLKCTRL_CEN_GIO (0x1 << 6)
+/* Pro4 or older */
#define SC_CLKCTRL_CEN_UMC (0x1 << 4)
#define SC_CLKCTRL_CEN_NAND (0x1 << 2)
#define SC_CLKCTRL_CEN_SBC (0x1 << 1)
#define SC_CLKCTRL_CEN_PERI (0x1 << 0)
+/* Pro5 or newer */
+#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c)
+#define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */
+#define SC_CLKCTRL4_CEN_UMC2 (0x1 << 2) /* UMC ch2 */
+#define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */
+#define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */
+
/* System reset control register */
#define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000)
#define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010)
diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h
index 43a6c35..678d437 100644
--- a/arch/arm/mach-uniphier/include/mach/sg-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h
@@ -25,53 +25,43 @@
/* Memory Configuration */
#define SG_MEMCONF (SG_CTRL_BASE | 0x0400)
+#define SG_MEMCONF_CH0_SZ_MASK ((0x1 << 10) | (0x03 << 0))
#define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0))
#define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0))
#define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0))
#define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0))
#define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0))
+#define SG_MEMCONF_CH0_NUM_MASK (0x1 << 8)
#define SG_MEMCONF_CH0_NUM_1 (0x1 << 8)
#define SG_MEMCONF_CH0_NUM_2 (0x0 << 8)
+#define SG_MEMCONF_CH1_SZ_MASK ((0x1 << 11) | (0x03 << 2))
#define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2))
#define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2))
#define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2))
#define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2))
#define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2))
+#define SG_MEMCONF_CH1_NUM_MASK (0x1 << 9)
#define SG_MEMCONF_CH1_NUM_1 (0x1 << 9)
#define SG_MEMCONF_CH1_NUM_2 (0x0 << 9)
+#define SG_MEMCONF_CH2_SZ_MASK ((0x1 << 26) | (0x03 << 16))
#define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16))
#define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16))
#define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16))
#define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16))
+#define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24)
#define SG_MEMCONF_CH2_NUM_1 (0x1 << 24)
#define SG_MEMCONF_CH2_NUM_2 (0x0 << 24)
+/* PH1-LD6b, ProXstream2 only */
+#define SG_MEMCONF_CH2_DISABLE (0x1 << 21)
#define SG_MEMCONF_SPARSEMEM (0x1 << 4)
/* Pin Control */
#define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000)
-#if defined(CONFIG_MACH_PH1_PRO4)
-# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8)
-#elif defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \
- defined(CONFIG_MACH_PH1_SLD8)
-# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4)
-#endif
-
-#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_PRO4)
-#define SG_PINSELBITS 4
-#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
-#define SG_PINSELBITS 8
-#endif
-
-#define SG_PINSEL_ADDR(n) (SG_PINCTRL((n) * (SG_PINSELBITS) / 32))
-#define SG_PINSEL_MASK(n) (~(((1 << (SG_PINSELBITS)) - 1) << \
- ((n) * (SG_PINSELBITS) % 32)))
-#define SG_PINSEL_MODE(n, mode) ((mode) << ((n) * (SG_PINSELBITS) % 32))
-
-/* Only for PH1-Pro4 */
+/* PH1-Pro4, PH1-Pro5 */
#define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700)
/* Input Enable */
@@ -98,11 +88,11 @@
#ifdef __ASSEMBLY__
- .macro set_pinsel, n, value, ra, rd
- ldr \ra, =SG_PINSEL_ADDR(\n)
+ .macro sg_set_pinsel, pin, muxval, mux_bits, reg_stride, ra, rd
+ ldr \ra, =(SG_PINCTRL_BASE + \pin * \mux_bits / 32 * \reg_stride)
ldr \rd, [\ra]
- and \rd, \rd, #SG_PINSEL_MASK(\n)
- orr \rd, \rd, #SG_PINSEL_MODE(\n, \value)
+ and \rd, \rd, #~(((1 << \mux_bits) - 1) << (\pin * \mux_bits % 32))
+ orr \rd, \rd, #(\muxval << (\pin * \mux_bits % 32))
str \rd, [\ra]
.endm
@@ -111,10 +101,18 @@
#include <linux/types.h>
#include <linux/io.h>
-static inline void sg_set_pinsel(int n, int value)
+static inline void sg_set_pinsel(unsigned pin, unsigned muxval,
+ unsigned mux_bits, unsigned reg_stride)
{
- writel((readl(SG_PINSEL_ADDR(n)) & SG_PINSEL_MASK(n))
- | SG_PINSEL_MODE(n, value), SG_PINSEL_ADDR(n));
+ unsigned shift = pin * mux_bits % 32;
+ unsigned reg = SG_PINCTRL_BASE + pin * mux_bits / 32 * reg_stride;
+ u32 mask = (1U << mux_bits) - 1;
+ u32 tmp;
+
+ tmp = readl(reg);
+ tmp &= ~(mask << shift);
+ tmp |= (mask & muxval) << shift;
+ writel(tmp, reg);
}
#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/mach-uniphier/include/mach/soc_info.h b/arch/arm/mach-uniphier/include/mach/soc_info.h
new file mode 100644
index 0000000..623e7ef
--- /dev/null
+++ b/arch/arm/mach-uniphier/include/mach/soc_info.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MACH_SOC_INFO_H__
+#define __MACH_SOC_INFO_H__
+
+enum uniphier_soc_id {
+ SOC_UNIPHIER_PH1_SLD3,
+ SOC_UNIPHIER_PH1_LD4,
+ SOC_UNIPHIER_PH1_PRO4,
+ SOC_UNIPHIER_PH1_SLD8,
+ SOC_UNIPHIER_PH1_PRO5,
+ SOC_UNIPHIER_PROXSTREAM2,
+ SOC_UNIPHIER_PH1_LD6B,
+ SOC_UNIPHIER_UNKNOWN,
+};
+
+#define UNIPHIER_NR_ENABLED_SOCS \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD4) + \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+
+#define UNIPHIER_MULTI_SOC ((UNIPHIER_NR_ENABLED_SOCS) > 1)
+
+#if UNIPHIER_MULTI_SOC
+enum uniphier_soc_id uniphier_get_soc_type(void);
+#else
+static inline enum uniphier_soc_id uniphier_get_soc_type(void)
+{
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+ return SOC_UNIPHIER_PH1_SLD3;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
+ return SOC_UNIPHIER_PH1_LD4;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
+ return SOC_UNIPHIER_PH1_PRO4;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
+ return SOC_UNIPHIER_PH1_SLD8;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
+ return SOC_UNIPHIER_PH1_PRO5;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
+ return SOC_UNIPHIER_PROXSTREAM2;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ return SOC_UNIPHIER_PH1_LD6B;
+#endif
+
+ return SOC_UNIPHIER_UNKNOWN;
+}
+#endif
+
+#endif /* __MACH_SOC_INFO_H__ */
diff --git a/arch/arm/mach-uniphier/init/Makefile b/arch/arm/mach-uniphier/init/Makefile
new file mode 100644
index 0000000..98833b5
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/Makefile
@@ -0,0 +1,9 @@
+obj-y += init.o
+
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += init-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += init-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += init-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += init-ph1-sld8.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += init-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += init-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += init-proxstream2.o
diff --git a/arch/arm/mach-uniphier/init/init-ph1-ld4.c b/arch/arm/mach-uniphier/init/init-ph1-ld4.c
new file mode 100644
index 0000000..8d0ef03
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/init-ph1-ld4.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/compiler.h>
+#include <mach/init.h>
+#include <mach/micro-support-card.h>
+
+int ph1_ld4_init(const struct uniphier_board_data *bd)
+{
+ ph1_ld4_bcu_init(bd);
+
+ ph1_ld4_sbc_init(bd);
+
+ support_card_reset();
+
+ ph1_ld4_pll_init(bd);
+
+ support_card_init();
+
+ led_puts("L0");
+
+ memconf_init(bd);
+
+ led_puts("L1");
+
+ ph1_ld4_early_clk_init(bd);
+
+ led_puts("L2");
+
+ led_puts("L3");
+
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+ preloader_console_init();
+#endif
+
+ led_puts("L4");
+
+ {
+ int res;
+
+ res = ph1_ld4_umc_init(bd);
+ if (res < 0) {
+ while (1)
+ ;
+ }
+ }
+
+ led_puts("L5");
+
+ ph1_ld4_enable_dpll_ssc(bd);
+
+ led_puts("L6");
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro4.c b/arch/arm/mach-uniphier/init/init-ph1-pro4.c
new file mode 100644
index 0000000..b9ce08d
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/init-ph1-pro4.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/compiler.h>
+#include <mach/init.h>
+#include <mach/micro-support-card.h>
+
+int ph1_pro4_init(const struct uniphier_board_data *bd)
+{
+ ph1_pro4_sbc_init(bd);
+
+ support_card_reset();
+
+ ph1_pro4_pll_init(bd);
+
+ support_card_init();
+
+ led_puts("L0");
+
+ memconf_init(bd);
+
+ led_puts("L1");
+
+ ph1_ld4_early_clk_init(bd);
+
+ led_puts("L2");
+
+ led_puts("L3");
+
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+ preloader_console_init();
+#endif
+
+ led_puts("L4");
+
+ {
+ int res;
+
+ res = ph1_pro4_umc_init(bd);
+ if (res < 0) {
+ while (1)
+ ;
+ }
+ }
+
+ led_puts("L5");
+
+ ph1_ld4_enable_dpll_ssc(bd);
+
+ led_puts("L6");
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro5.c b/arch/arm/mach-uniphier/init/init-ph1-pro5.c
new file mode 100644
index 0000000..92b3f21
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/init-ph1-pro5.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/compiler.h>
+#include <mach/init.h>
+#include <mach/micro-support-card.h>
+
+int ph1_pro5_init(const struct uniphier_board_data *bd)
+{
+ ph1_pro4_sbc_init(bd);
+
+ support_card_reset();
+
+ support_card_init();
+
+ led_puts("L0");
+
+ memconf_init(bd);
+
+ led_puts("L1");
+
+ ph1_pro5_early_clk_init(bd);
+
+ led_puts("L2");
+
+ led_puts("L3");
+
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+ preloader_console_init();
+#endif
+
+ led_puts("L4");
+
+ led_puts("L5");
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/init/init-ph1-sld3.c b/arch/arm/mach-uniphier/init/init-ph1-sld3.c
new file mode 100644
index 0000000..1146fda
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/init-ph1-sld3.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/compiler.h>
+#include <mach/init.h>
+#include <mach/micro-support-card.h>
+
+int ph1_sld3_init(const struct uniphier_board_data *bd)
+{
+ ph1_sld3_bcu_init(bd);
+
+ ph1_sld3_sbc_init(bd);
+
+ support_card_reset();
+
+ ph1_sld3_pll_init(bd);
+
+ support_card_init();
+
+ led_puts("L0");
+
+ memconf_init(bd);
+ ph1_sld3_memconf_init(bd);
+
+ led_puts("L1");
+
+ ph1_ld4_early_clk_init(bd);
+
+ led_puts("L2");
+
+ ph1_sld3_early_pin_init(bd);
+
+ led_puts("L3");
+
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+ preloader_console_init();
+#endif
+
+ led_puts("L4");
+
+ led_puts("L5");
+
+ ph1_sld3_enable_dpll_ssc(bd);
+
+ led_puts("L6");
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/init/init-ph1-sld8.c b/arch/arm/mach-uniphier/init/init-ph1-sld8.c
new file mode 100644
index 0000000..741e88c
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/init-ph1-sld8.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/compiler.h>
+#include <mach/init.h>
+#include <mach/micro-support-card.h>
+
+int ph1_sld8_init(const struct uniphier_board_data *bd)
+{
+ ph1_ld4_bcu_init(bd);
+
+ ph1_ld4_sbc_init(bd);
+
+ support_card_reset();
+
+ ph1_sld8_pll_init(bd);
+
+ support_card_init();
+
+ led_puts("L0");
+
+ memconf_init(bd);
+
+ led_puts("L1");
+
+ ph1_ld4_early_clk_init(bd);
+
+ led_puts("L2");
+
+ led_puts("L3");
+
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+ preloader_console_init();
+#endif
+
+ led_puts("L4");
+
+ {
+ int res;
+
+ res = ph1_sld8_umc_init(bd);
+ if (res < 0) {
+ while (1)
+ ;
+ }
+ }
+
+ led_puts("L5");
+
+ ph1_ld4_enable_dpll_ssc(bd);
+
+ led_puts("L6");
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/init/init-proxstream2.c b/arch/arm/mach-uniphier/init/init-proxstream2.c
new file mode 100644
index 0000000..8d03b8f
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/init-proxstream2.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <linux/compiler.h>
+#include <mach/init.h>
+#include <mach/micro-support-card.h>
+
+int proxstream2_init(const struct uniphier_board_data *bd)
+{
+ proxstream2_sbc_init(bd);
+
+ support_card_reset();
+
+ support_card_init();
+
+ led_puts("L0");
+
+ memconf_init(bd);
+ proxstream2_memconf_init(bd);
+
+ led_puts("L1");
+
+ proxstream2_early_clk_init(bd);
+
+ led_puts("L2");
+
+ led_puts("L3");
+
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+ preloader_console_init();
+#endif
+
+ led_puts("L4");
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/init/init.c b/arch/arm/mach-uniphier/init/init.c
new file mode 100644
index 0000000..bbfc8e5
--- /dev/null
+++ b/arch/arm/mach-uniphier/init/init.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <mach/init.h>
+#include <mach/soc_info.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void spl_board_init(void)
+{
+ const struct uniphier_board_data *param;
+
+ param = uniphier_get_board_param(gd->fdt_blob);
+ if (!param)
+ hang();
+
+ switch (uniphier_get_soc_type()) {
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+ case SOC_UNIPHIER_PH1_SLD3:
+ ph1_sld3_init(param);
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
+ case SOC_UNIPHIER_PH1_LD4:
+ ph1_ld4_init(param);
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
+ case SOC_UNIPHIER_PH1_PRO4:
+ ph1_pro4_init(param);
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
+ case SOC_UNIPHIER_PH1_SLD8:
+ ph1_sld8_init(param);
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
+ case SOC_UNIPHIER_PH1_PRO5:
+ ph1_pro5_init(param);
+ break;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ case SOC_UNIPHIER_PROXSTREAM2:
+ case SOC_UNIPHIER_PH1_LD6B:
+ proxstream2_init(param);
+ break;
+#endif
+ default:
+ break;
+ }
+}
diff --git a/arch/arm/mach-uniphier/init_page_table.S b/arch/arm/mach-uniphier/init_page_table.S
index ac2959a..2d3ad15 100644
--- a/arch/arm/mach-uniphier/init_page_table.S
+++ b/arch/arm/mach-uniphier/init_page_table.S
@@ -1,7 +1,5 @@
/*
- * Copyright (C) 2015 Panasonic Corporation
- * Copyright (C) 2015 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -23,7 +21,7 @@
ENTRY(init_page_table)
section = 0
.rept NR_SECTIONS
- .if section == TEXT_SECTION || section == STACK_SECTION
+ .if section == 0 || section == 1 || section == STACK_SECTION
attr = NORMAL
.else
attr = DEVICE
diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S
index fd34a4a..66cad42 100644
--- a/arch/arm/mach-uniphier/lowlevel_init.S
+++ b/arch/arm/mach-uniphier/lowlevel_init.S
@@ -8,7 +8,6 @@
#include <linux/linkage.h>
#include <linux/sizes.h>
#include <asm/system.h>
-#include <mach/led.h>
#include <mach/arm-mpcore.h>
#include <mach/sbc-regs.h>
#include <mach/ssc-regs.h>
@@ -28,7 +27,7 @@
mcr p15, 0, r0, c1, c0, 0
#ifdef CONFIG_DEBUG_LL
- bl setup_lowlevel_debug
+ bl debug_ll_init
#endif
/*
diff --git a/arch/arm/mach-uniphier/memconf.c b/arch/arm/mach-uniphier/memconf.c
deleted file mode 100644
index 59ed0b5..0000000
--- a/arch/arm/mach-uniphier/memconf.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/sizes.h>
-#include <linux/io.h>
-#include <mach/sg-regs.h>
-
-static inline u32 sg_memconf_val_ch0(unsigned long size, int num)
-{
- int size_mb = size / num;
- u32 ret;
-
- switch (size_mb) {
- case SZ_64M:
- ret = SG_MEMCONF_CH0_SZ_64M;
- break;
- case SZ_128M:
- ret = SG_MEMCONF_CH0_SZ_128M;
- break;
- case SZ_256M:
- ret = SG_MEMCONF_CH0_SZ_256M;
- break;
- case SZ_512M:
- ret = SG_MEMCONF_CH0_SZ_512M;
- break;
- case SZ_1G:
- ret = SG_MEMCONF_CH0_SZ_1G;
- break;
- default:
- BUG();
- break;
- }
-
- switch (num) {
- case 1:
- ret |= SG_MEMCONF_CH0_NUM_1;
- break;
- case 2:
- ret |= SG_MEMCONF_CH0_NUM_2;
- break;
- default:
- BUG();
- break;
- }
- return ret;
-}
-
-static inline u32 sg_memconf_val_ch1(unsigned long size, int num)
-{
- int size_mb = size / num;
- u32 ret;
-
- switch (size_mb) {
- case SZ_64M:
- ret = SG_MEMCONF_CH1_SZ_64M;
- break;
- case SZ_128M:
- ret = SG_MEMCONF_CH1_SZ_128M;
- break;
- case SZ_256M:
- ret = SG_MEMCONF_CH1_SZ_256M;
- break;
- case SZ_512M:
- ret = SG_MEMCONF_CH1_SZ_512M;
- break;
- case SZ_1G:
- ret = SG_MEMCONF_CH1_SZ_1G;
- break;
- default:
- BUG();
- break;
- }
-
- switch (num) {
- case 1:
- ret |= SG_MEMCONF_CH1_NUM_1;
- break;
- case 2:
- ret |= SG_MEMCONF_CH1_NUM_2;
- break;
- default:
- BUG();
- break;
- }
- return ret;
-}
-
-void memconf_init(void)
-{
- u32 tmp;
-
- /* Set DDR size */
- tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0);
- tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1);
-#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE
- tmp |= SG_MEMCONF_SPARSEMEM;
-#endif
- writel(tmp, SG_MEMCONF);
-}
diff --git a/arch/arm/mach-uniphier/memconf/Makefile b/arch/arm/mach-uniphier/memconf/Makefile
new file mode 100644
index 0000000..42057a2
--- /dev/null
+++ b/arch/arm/mach-uniphier/memconf/Makefile
@@ -0,0 +1,4 @@
+obj-y += memconf.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += memconf-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += memconf-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += memconf-proxstream2.o
diff --git a/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c b/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c
new file mode 100644
index 0000000..e13f56d1
--- /dev/null
+++ b/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+int ph1_sld3_memconf_init(const struct uniphier_board_data *bd)
+{
+ u32 tmp;
+ unsigned long size_per_word;
+
+ tmp = readl(SG_MEMCONF);
+
+ tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK);
+
+ switch (bd->dram_ch2_width) {
+ case 16:
+ tmp |= SG_MEMCONF_CH2_NUM_1;
+ size_per_word = bd->dram_ch2_size;
+ break;
+ case 32:
+ tmp |= SG_MEMCONF_CH2_NUM_2;
+ size_per_word = bd->dram_ch2_size >> 1;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch2 width\n");
+ return -EINVAL;
+ }
+
+ /* Set DDR size */
+ switch (size_per_word) {
+ case SZ_64M:
+ tmp |= SG_MEMCONF_CH2_SZ_64M;
+ break;
+ case SZ_128M:
+ tmp |= SG_MEMCONF_CH2_SZ_128M;
+ break;
+ case SZ_256M:
+ tmp |= SG_MEMCONF_CH2_SZ_256M;
+ break;
+ case SZ_512M:
+ tmp |= SG_MEMCONF_CH2_SZ_512M;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch2 size\n");
+ return -EINVAL;
+ }
+
+ writel(tmp, SG_MEMCONF);
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c
new file mode 100644
index 0000000..d7bf0d4
--- /dev/null
+++ b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+int proxstream2_memconf_init(const struct uniphier_board_data *bd)
+{
+ u32 tmp;
+ unsigned long size_per_word;
+
+ tmp = readl(SG_MEMCONF);
+
+ tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK);
+
+ switch (bd->dram_ch2_width) {
+ case 16:
+ tmp |= SG_MEMCONF_CH2_NUM_1;
+ size_per_word = bd->dram_ch2_size;
+ break;
+ case 32:
+ tmp |= SG_MEMCONF_CH2_NUM_2;
+ size_per_word = bd->dram_ch2_size >> 1;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch2 width\n");
+ return -EINVAL;
+ }
+
+ /* Set DDR size */
+ switch (size_per_word) {
+ case SZ_64M:
+ tmp |= SG_MEMCONF_CH2_SZ_64M;
+ break;
+ case SZ_128M:
+ tmp |= SG_MEMCONF_CH2_SZ_128M;
+ break;
+ case SZ_256M:
+ tmp |= SG_MEMCONF_CH2_SZ_256M;
+ break;
+ case SZ_512M:
+ tmp |= SG_MEMCONF_CH2_SZ_512M;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch2 size\n");
+ return -EINVAL;
+ }
+
+ if (size_per_word)
+ tmp &= ~SG_MEMCONF_CH2_DISABLE;
+ else
+ tmp |= SG_MEMCONF_CH2_DISABLE;
+
+ writel(tmp, SG_MEMCONF);
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/memconf/memconf.c b/arch/arm/mach-uniphier/memconf/memconf.c
new file mode 100644
index 0000000..d490736
--- /dev/null
+++ b/arch/arm/mach-uniphier/memconf/memconf.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+int memconf_init(const struct uniphier_board_data *bd)
+{
+ u32 tmp = 0;
+ unsigned long size_per_word;
+
+ tmp = readl(SG_MEMCONF);
+
+ tmp &= ~(SG_MEMCONF_CH0_SZ_MASK | SG_MEMCONF_CH0_NUM_MASK);
+
+ switch (bd->dram_ch0_width) {
+ case 16:
+ tmp |= SG_MEMCONF_CH0_NUM_1;
+ size_per_word = bd->dram_ch0_size;
+ break;
+ case 32:
+ tmp |= SG_MEMCONF_CH0_NUM_2;
+ size_per_word = bd->dram_ch0_size >> 1;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch0 width\n");
+ return -EINVAL;
+ }
+
+ /* Set DDR size */
+ switch (size_per_word) {
+ case SZ_64M:
+ tmp |= SG_MEMCONF_CH0_SZ_64M;
+ break;
+ case SZ_128M:
+ tmp |= SG_MEMCONF_CH0_SZ_128M;
+ break;
+ case SZ_256M:
+ tmp |= SG_MEMCONF_CH0_SZ_256M;
+ break;
+ case SZ_512M:
+ tmp |= SG_MEMCONF_CH0_SZ_512M;
+ break;
+ case SZ_1G:
+ tmp |= SG_MEMCONF_CH0_SZ_1G;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch0 size\n");
+ return -EINVAL;
+ }
+
+ tmp &= ~(SG_MEMCONF_CH1_SZ_MASK | SG_MEMCONF_CH1_NUM_MASK);
+
+ switch (bd->dram_ch1_width) {
+ case 16:
+ tmp |= SG_MEMCONF_CH1_NUM_1;
+ size_per_word = bd->dram_ch1_size;
+ break;
+ case 32:
+ tmp |= SG_MEMCONF_CH1_NUM_2;
+ size_per_word = bd->dram_ch1_size >> 1;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch1 width\n");
+ return -EINVAL;
+ }
+
+ switch (size_per_word) {
+ case SZ_64M:
+ tmp |= SG_MEMCONF_CH1_SZ_64M;
+ break;
+ case SZ_128M:
+ tmp |= SG_MEMCONF_CH1_SZ_128M;
+ break;
+ case SZ_256M:
+ tmp |= SG_MEMCONF_CH1_SZ_256M;
+ break;
+ case SZ_512M:
+ tmp |= SG_MEMCONF_CH1_SZ_512M;
+ break;
+ case SZ_1G:
+ tmp |= SG_MEMCONF_CH1_SZ_1G;
+ break;
+ default:
+ pr_err("error: unsupported DRAM Ch1 size\n");
+ return -EINVAL;
+ }
+
+ if (bd->dram_ch0_base + bd->dram_ch0_size < bd->dram_ch1_base)
+ tmp |= SG_MEMCONF_SPARSEMEM;
+ else
+ tmp &= ~SG_MEMCONF_SPARSEMEM;
+
+ writel(tmp, SG_MEMCONF);
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/micro-support-card.c b/arch/arm/mach-uniphier/micro-support-card.c
new file mode 100644
index 0000000..4c34748
--- /dev/null
+++ b/arch/arm/mach-uniphier/micro-support-card.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <mach/micro-support-card.h>
+
+#define MICRO_SUPPORT_CARD_BASE 0x43f00000
+#define SMC911X_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x00000)
+#define LED_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x90000)
+#define NS16550A_BASE ((MICRO_SUPPORT_CARD_BASE) + 0xb0000)
+#define MICRO_SUPPORT_CARD_RESET ((MICRO_SUPPORT_CARD_BASE) + 0xd0034)
+#define MICRO_SUPPORT_CARD_REVISION ((MICRO_SUPPORT_CARD_BASE) + 0xd00E0)
+
+/*
+ * 0: reset deassert, 1: reset
+ *
+ * bit[0]: LAN, I2C, LED
+ * bit[1]: UART
+ */
+void support_card_reset_deassert(void)
+{
+ writel(0, MICRO_SUPPORT_CARD_RESET);
+}
+
+void support_card_reset(void)
+{
+ writel(3, MICRO_SUPPORT_CARD_RESET);
+}
+
+static int support_card_show_revision(void)
+{
+ u32 revision;
+
+ revision = readl(MICRO_SUPPORT_CARD_REVISION);
+ printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf);
+ return 0;
+}
+
+int check_support_card(void)
+{
+ printf("SC: Micro Support Card ");
+ return support_card_show_revision();
+}
+
+void support_card_init(void)
+{
+ /*
+ * After power on, we need to keep the LAN controller in reset state
+ * for a while. (200 usec)
+ * Fortunately, enough wait time is already inserted in pll_init()
+ * function. So we do not have to wait here.
+ */
+ support_card_reset_deassert();
+}
+
+#if defined(CONFIG_SMC911X)
+#include <netdev.h>
+
+int board_eth_init(bd_t *bis)
+{
+ return smc911x_initialize(0, SMC911X_BASE);
+}
+#endif
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+
+#include <mtd/cfi_flash.h>
+#include <mach/sbc-regs.h>
+
+struct memory_bank {
+ phys_addr_t base;
+ unsigned long size;
+};
+
+static int mem_is_flash(const struct memory_bank *mem)
+{
+ const int loop = 128;
+ u32 *scratch_addr;
+ u32 saved_value;
+ int ret = 1;
+ int i;
+
+ /* just in case, use the tail of the memory bank */
+ scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
+ sizeof(u32) * loop, MAP_NOCACHE);
+
+ for (i = 0; i < loop; i++, scratch_addr++) {
+ saved_value = readl(scratch_addr);
+ writel(~saved_value, scratch_addr);
+ if (readl(scratch_addr) != saved_value) {
+ /* We assume no memory or SRAM here. */
+ writel(saved_value, scratch_addr);
+ ret = 0;
+ break;
+ }
+ }
+
+ unmap_physmem(scratch_addr, MAP_NOCACHE);
+
+ return ret;
+}
+
+/* {address, size} */
+static const struct memory_bank memory_banks[] = {
+ {0x42000000, 0x01f00000},
+};
+
+static const struct memory_bank
+*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
+
+phys_addr_t cfi_flash_bank_addr(int i)
+{
+ return flash_banks_list[i]->base;
+}
+
+unsigned long cfi_flash_bank_size(int i)
+{
+ return flash_banks_list[i]->size;
+}
+
+static void detect_num_flash_banks(void)
+{
+ const struct memory_bank *memory_bank, *end;
+
+ cfi_flash_num_flash_banks = 0;
+
+ memory_bank = memory_banks;
+ end = memory_bank + ARRAY_SIZE(memory_banks);
+
+ for (; memory_bank < end; memory_bank++) {
+ if (cfi_flash_num_flash_banks >=
+ CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
+ break;
+
+ if (mem_is_flash(memory_bank)) {
+ flash_banks_list[cfi_flash_num_flash_banks] =
+ memory_bank;
+
+ debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
+ memory_bank->base, memory_bank->size);
+ cfi_flash_num_flash_banks++;
+ }
+ }
+
+ debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
+}
+#else /* CONFIG_SYS_NO_FLASH */
+void detect_num_flash_banks(void)
+{
+};
+#endif /* CONFIG_SYS_NO_FLASH */
+
+void support_card_late_init(void)
+{
+ detect_num_flash_banks();
+}
+
+static const u8 ledval_num[] = {
+ 0x7e, /* 0 */
+ 0x0c, /* 1 */
+ 0xb6, /* 2 */
+ 0x9e, /* 3 */
+ 0xcc, /* 4 */
+ 0xda, /* 5 */
+ 0xfa, /* 6 */
+ 0x4e, /* 7 */
+ 0xfe, /* 8 */
+ 0xde, /* 9 */
+};
+
+static const u8 ledval_alpha[] = {
+ 0xee, /* A */
+ 0xf8, /* B */
+ 0x72, /* C */
+ 0xbc, /* D */
+ 0xf2, /* E */
+ 0xe2, /* F */
+ 0x7a, /* G */
+ 0xe8, /* H */
+ 0x08, /* I */
+ 0x3c, /* J */
+ 0xea, /* K */
+ 0x70, /* L */
+ 0x6e, /* M */
+ 0xa8, /* N */
+ 0xb8, /* O */
+ 0xe6, /* P */
+ 0xce, /* Q */
+ 0xa0, /* R */
+ 0xc8, /* S */
+ 0x8c, /* T */
+ 0x7c, /* U */
+ 0x54, /* V */
+ 0xfc, /* W */
+ 0xec, /* X */
+ 0xdc, /* Y */
+ 0xa4, /* Z */
+};
+
+static u8 char2ledval(char c)
+{
+ if (isdigit(c))
+ return ledval_num[c - '0'];
+ else if (isalpha(c))
+ return ledval_alpha[toupper(c) - 'A'];
+
+ return 0;
+}
+
+void led_puts(const char *s)
+{
+ int i;
+ u32 val = 0;
+
+ if (!s)
+ return;
+
+ for (i = 0; i < 4; i++) {
+ val <<= 8;
+ val |= char2ledval(*s);
+ if (*s != '\0')
+ s++;
+ }
+
+ writel(~val, LED_BASE);
+}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile
deleted file mode 100644
index 1410b12..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \
- early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o
-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
-obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
-else
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
-endif
-
-obj-y += boot-mode.o
diff --git a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c b/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c
deleted file mode 100644
index d359b56..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-pro4/boot-mode.c"
diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c
deleted file mode 100644
index d7ef16b..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-pro4/early_clkrst_init.c"
diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c
deleted file mode 100644
index e5e86bb..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Panasonic Corporation
- * Copyright (C) 2015 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <mach/sg-regs.h>
-
-void early_pin_init(void)
-{
- /* Comment format: PAD Name -> Function Name */
-
-#ifdef CONFIG_UNIPHIER_SERIAL
- sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */
- sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */
-
- sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */
- sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */
-
- sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */
- sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */
-
- sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */
- sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */
-#endif
-}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S
deleted file mode 100644
index 7928c5c..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * On-chip UART initializaion for low-level debugging
- *
- * Copyright (C) 2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/linkage.h>
-#include <mach/sg-regs.h>
-
-#define UART_CLK 36864000
-#include <mach/debug-uart.S>
-
-ENTRY(setup_lowlevel_debug)
- init_debug_uart r0, r1, r2
-
- /* UART Port 0 */
- set_pinsel 85, 1, r0, r1
- set_pinsel 88, 1, r0, r1
-
- ldr r0, =SG_IECTRL
- ldr r1, [r0]
- orr r1, r1, #1
- str r1, [r0]
-
- mov pc, lr
-ENDPROC(setup_lowlevel_debug)
diff --git a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c
deleted file mode 100644
index 20cc7b3..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <mach/sg-regs.h>
-
-void pin_init(void)
-{
- u32 tmp;
-
- /* Comment format: PAD Name -> Function Name */
-
-#ifdef CONFIG_NAND_DENALI
- sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */
- sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */
- sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */
- sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */
- sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */
- sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */
- sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */
- sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */
- sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */
- sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */
- sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */
- sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */
- sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */
- sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */
- sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */
- sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */
- sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */
-#endif
-
-#ifdef CONFIG_USB_EHCI_UNIPHIER
- sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */
- sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */
- sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */
- sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */
- /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */
- /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */
-#endif
-
- tmp = readl(SG_IECTRL);
- tmp |= 0x41;
- writel(tmp, SG_IECTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c
deleted file mode 100644
index 837b2a8..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-pro4/pll_spectrum.c"
diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c
deleted file mode 100644
index 5b5958b..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
- u32 tmp;
-
- /* system bus output enable */
- tmp = readl(PC0CTRL);
- tmp &= 0xfffffcff;
- writel(tmp, PC0CTRL);
-
- /* XECS1: sub/boot memory (boot swap = off/on) */
- writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
- writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
- writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
- writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-
- /* XECS0: boot/sub memory (boot swap = off/on) */
- writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
- writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
- writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
- writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-
- /* XECS3: peripherals */
- writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
- writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
- writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
- writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
-
- /* base address regsiters */
- writel(0x0000bc01, SBBASE0);
- writel(0x0400bc01, SBBASE1);
- writel(0x0800bf01, SBBASE3);
-
- /* enable access to sub memory when boot swap is on */
- if (boot_is_swapped())
- sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */
-
- sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */
-}
diff --git a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c b/arch/arm/mach-uniphier/ph1-ld4/sg_init.c
deleted file mode 100644
index dab56e9..0000000
--- a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <mach/sg-regs.h>
-
-void sg_init(void)
-{
- u32 tmp;
-
- /* Input ports must be enabled before deasserting reset of cores */
- tmp = readl(SG_IECTRL);
- tmp |= 0x1;
- writel(tmp, SG_IECTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile
deleted file mode 100644
index 229f443..0000000
--- a/arch/arm/mach-uniphier/ph1-pro4/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-y += sg_init.o pll_init.o early_clkrst_init.o \
- early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o
-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
-obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
-else
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
-endif
-
-obj-y += boot-mode.o
diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c
deleted file mode 100644
index e78d6ab..0000000
--- a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <mach/sg-regs.h>
-
-void early_pin_init(void)
-{
- /* Comment format: PAD Name -> Function Name */
-
-#ifdef CONFIG_UNIPHIER_SERIAL
- sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */
- sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */
- sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */
- sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */
- sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */
- sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */
- sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */
- sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */
-#endif
-
- writel(1, SG_LOADPINCTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S
deleted file mode 100644
index fcaf6d1..0000000
--- a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * On-chip UART initializaion for low-level debugging
- *
- * Copyright (C) 2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/linkage.h>
-#include <mach/sc-regs.h>
-#include <mach/sg-regs.h>
-
-#define UART_CLK 73728000
-#include <mach/debug-uart.S>
-
-ENTRY(setup_lowlevel_debug)
- ldr r0, =SC_CLKCTRL
- ldr r1, [r0]
- orr r1, r1, #SC_CLKCTRL_CEN_PERI
- str r1, [r0]
-
- init_debug_uart r0, r1, r2
-
- /* UART Port 0 */
- set_pinsel 127, 0, r0, r1
- set_pinsel 128, 0, r0, r1
-
- ldr r0, =SG_LOADPINCTRL
- mov r1, #1
- str r1, [r0]
-
- ldr r0, =SG_IECTRL
- ldr r1, [r0]
- orr r1, r1, #1
- str r1, [r0]
-
- mov pc, lr
-ENDPROC(setup_lowlevel_debug)
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c
deleted file mode 100644
index 2a5a296..0000000
--- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <mach/sg-regs.h>
-
-void pin_init(void)
-{
- /* Comment format: PAD Name -> Function Name */
-
-#ifdef CONFIG_NAND_DENALI
- sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */
- sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */
- sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */
- sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */
- sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */
- sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */
- sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */
- sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */
- sg_set_pinsel(48, 0); /* NFALE -> NFALE */
- sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */
- sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */
- sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */
- sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */
- sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */
- sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */
- /* sg_set_pinsel(131, 1); */ /* RXD2 -> NRYBY1 */
- /* sg_set_pinsel(132, 1); */ /* TXD2 -> XNFCE1 */
-#endif
-
-#ifdef CONFIG_USB_XHCI_UNIPHIER
- sg_set_pinsel(180, 0); /* USB0VBUS -> USB0VBUS */
- sg_set_pinsel(181, 0); /* USB0OD -> USB0OD */
- sg_set_pinsel(182, 0); /* USB1VBUS -> USB1VBUS */
- sg_set_pinsel(183, 0); /* USB1OD -> USB1OD */
-#endif
-
-#ifdef CONFIG_USB_EHCI_UNIPHIER
- sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */
- sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */
- sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */
- sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */
-#endif
-
- writel(1, SG_LOADPINCTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c
deleted file mode 100644
index 877ba79..0000000
--- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
- /* XECS0: boot/sub memory (boot swap = off/on) */
- writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
- writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
- writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
- writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-
- /* XECS1: sub/boot memory (boot swap = off/on) */
- writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
- writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
- writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
- writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-
- /* XECS3: peripherals */
- writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
- writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
- writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
- writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
-
- writel(0x0000bc01, SBBASE0); /* boot memory */
- writel(0x0400bc01, SBBASE1); /* sub memory */
- writel(0x0800bf01, SBBASE3); /* peripherals */
-
- /* enable access to sub memory when boot swap is on */
- if (boot_is_swapped())
- sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */
-
- sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */
- writel(0x00000001, SG_LOADPINCTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c b/arch/arm/mach-uniphier/ph1-pro4/sg_init.c
deleted file mode 100644
index d6ccffb..0000000
--- a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <mach/sg-regs.h>
-
-void sg_init(void)
-{
- u32 tmp;
-
- /* Input ports must be enabled before deasserting reset of cores */
- tmp = readl(SG_IECTRL);
- tmp |= 1 << 6;
- writel(tmp, SG_IECTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile
deleted file mode 100644
index aff5d64..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \
- early_pinctrl.o pll_spectrum.o umc_init.o
-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
-obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
-else
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
-endif
-
-obj-y += boot-mode.o
diff --git a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c
deleted file mode 100644
index 3a3dab7..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-pro4/clkrst_init.c"
diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c
deleted file mode 100644
index d7ef16b..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-pro4/early_clkrst_init.c"
diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c
deleted file mode 100644
index f113e65..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <mach/sg-regs.h>
-
-void early_pin_init(void)
-{
- /* Comment format: PAD Name -> Function Name */
-
-#ifdef CONFIG_UNIPHIER_SERIAL
- sg_set_pinsel(63, 0); /* RXD0 */
- sg_set_pinsel(64, 1); /* TXD0 */
-
- sg_set_pinsel(65, 0); /* RXD1 */
- sg_set_pinsel(66, 1); /* TXD1 */
-
- sg_set_pinsel(96, 2); /* RXD2 */
- sg_set_pinsel(102, 2); /* TXD2 */
-#endif
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S
deleted file mode 100644
index 41f67b7..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * On-chip UART initializaion for low-level debugging
- *
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/linkage.h>
-#include <mach/bcu-regs.h>
-#include <mach/sc-regs.h>
-#include <mach/sg-regs.h>
-
-#define UART_CLK 36864000
-#include <mach/debug-uart.S>
-
-ENTRY(setup_lowlevel_debug)
- ldr r0, =BCSCR5
- ldr r1, =0x24440000
- str r1, [r0]
-
- ldr r0, =SC_CLKCTRL
- ldr r1, [r0]
- orr r1, r1, #SC_CLKCTRL_CEN_PERI
- str r1, [r0]
-
- init_debug_uart r0, r1, r2
-
- set_pinsel 63, 0, r0, r1
- set_pinsel 64, 1, r0, r1
-
- mov pc, lr
-ENDPROC(setup_lowlevel_debug)
diff --git a/arch/arm/mach-uniphier/ph1-sld3/memconf.c b/arch/arm/mach-uniphier/ph1-sld3/memconf.c
deleted file mode 100644
index 553a9e3..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/memconf.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include <linux/sizes.h>
-#include <mach/sg-regs.h>
-
-static inline u32 sg_memconf_val_ch2(unsigned long size, int num)
-{
- int size_mb = size / num;
- u32 ret;
-
- switch (size_mb) {
- case SZ_64M:
- ret = SG_MEMCONF_CH2_SZ_64M;
- break;
- case SZ_128M:
- ret = SG_MEMCONF_CH2_SZ_128M;
- break;
- case SZ_256M:
- ret = SG_MEMCONF_CH2_SZ_256M;
- break;
- case SZ_512M:
- ret = SG_MEMCONF_CH2_SZ_512M;
- break;
- default:
- BUG();
- break;
- }
-
- switch (num) {
- case 1:
- ret |= SG_MEMCONF_CH2_NUM_1;
- break;
- case 2:
- ret |= SG_MEMCONF_CH2_NUM_2;
- break;
- default:
- BUG();
- break;
- }
- return ret;
-}
-
-u32 memconf_additional_val(void)
-{
- return sg_memconf_val_ch2(CONFIG_SDRAM2_SIZE, CONFIG_DDR_NUM_CH2);
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c
deleted file mode 100644
index 5ecbe4c..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <mach/sg-regs.h>
-
-void pin_init(void)
-{
-#ifdef CONFIG_USB_EHCI_UNIPHIER
- sg_set_pinsel(13, 0); /* USB0OC */
- sg_set_pinsel(14, 1); /* USB0VBUS */
-
- sg_set_pinsel(15, 0); /* USB1OC */
- sg_set_pinsel(16, 1); /* USB1VBUS */
-
- sg_set_pinsel(17, 0); /* USB2OC */
- sg_set_pinsel(18, 1); /* USB2VBUS */
-
- sg_set_pinsel(19, 0); /* USB3OC */
- sg_set_pinsel(20, 1); /* USB3VBUS */
-#endif
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c
deleted file mode 100644
index fcf2ad2..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sc-regs.h>
-
-void enable_dpll_ssc(void)
-{
- u32 tmp;
-
- tmp = readl(SC_DPLLCTRL);
- tmp |= SC_DPLLCTRL_SSC_EN;
- writel(tmp, SC_DPLLCTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c
deleted file mode 100644
index f5e2446..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
- /* only address/data multiplex mode is supported */
-
- /* XECS0 : boot/sub memory (boot swap = off/on) */
- writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00);
- writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01);
- writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02);
-
- /* XECS1 : sub/boot memory (boot swap = off/on) */
- writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10);
- writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11);
- writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12);
-
- /* XECS2 : peripherals */
- writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20);
- writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21);
- writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22);
-
- /* base address regsiters */
- writel(0x0000bc01, SBBASE0);
- writel(0x0400bc01, SBBASE1);
- writel(0x0800bf01, SBBASE2);
-
- sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c b/arch/arm/mach-uniphier/ph1-sld3/sg_init.c
deleted file mode 100644
index ca3cb9c..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-void sg_init(void)
-{
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c b/arch/arm/mach-uniphier/ph1-sld3/umc_init.c
deleted file mode 100644
index 91ee3de..0000000
--- a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-int umc_init(void)
-{
- /* add UMC init code here */
- printf("Implement memory init code\n");
-
- return 0;
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld8/Makefile b/arch/arm/mach-uniphier/ph1-sld8/Makefile
deleted file mode 100644
index 8eb575e..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include $(src)/../ph1-ld4/Makefile
diff --git a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c b/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c
deleted file mode 100644
index 69b172e..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-ld4/bcu_init.c"
diff --git a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c b/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c
deleted file mode 100644
index d359b56..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-pro4/boot-mode.c"
diff --git a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c
deleted file mode 100644
index 8d3435d..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-ld4/clkrst_init.c"
diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c
deleted file mode 100644
index dd236b7..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-ld4/early_clkrst_init.c"
diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c
deleted file mode 100644
index 28cc429..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Panasonic Corporation
- * Copyright (C) 2015 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <mach/sg-regs.h>
-
-void early_pin_init(void)
-{
- /* Comment format: PAD Name -> Function Name */
-
-#ifdef CONFIG_UNIPHIER_SERIAL
- sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */
- sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */
-
- sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */
- sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */
-
- sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */
- sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */
-
- sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */
- sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */
-#endif
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S
deleted file mode 100644
index 73f0f63..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * On-chip UART initializaion for low-level debugging
- *
- * Copyright (C) 2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/linkage.h>
-#include <mach/sg-regs.h>
-
-#define UART_CLK 80000000
-#include <mach/debug-uart.S>
-
-ENTRY(setup_lowlevel_debug)
- init_debug_uart r0, r1, r2
-
- /* UART Port 0 */
- set_pinsel 70, 3, r0, r1
- set_pinsel 71, 3, r0, r1
-
- ldr r0, =SG_IECTRL
- ldr r1, [r0]
- orr r1, r1, #1
- str r1, [r0]
-
- mov pc, lr
-ENDPROC(setup_lowlevel_debug)
diff --git a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c
deleted file mode 100644
index 130c831..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-#include <mach/sg-regs.h>
-
-void pin_init(void)
-{
- /* Comment format: PAD Name -> Function Name */
-
-#ifdef CONFIG_SYS_I2C_UNIPHIER
- {
- u32 tmp;
- tmp = readl(SG_IECTRL);
- tmp |= 0xc00; /* enable SCL0, SDA0, SCL1, SDA1 */
- writel(tmp, SG_IECTRL);
- }
-#endif
-
-#ifdef CONFIG_NAND_DENALI
- sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */
- sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */
- sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */
- sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */
- sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */
- sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */
- sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */
- sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */
- sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */
- sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */
- sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */
- sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */
- sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */
- sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */
- sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */
- sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */
- sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */
-#endif
-
-#ifdef CONFIG_USB_EHCI_UNIPHIER
- sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */
- sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */
- sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */
- sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */
- /* sg_set_pinsel(114, 1); */ /* TXD1 -> USB2VBUS (shared with UART) */
- /* sg_set_pinsel(115, 1); */ /* RXD1 -> USB2OD */
-#endif
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c
deleted file mode 100644
index 9b8c485..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-ld4/pll_spectrum.c"
diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c
deleted file mode 100644
index 225c0d2..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-ld4/sbc_init.c"
diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c
deleted file mode 100644
index c2267c7..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
- u32 tmp;
-
- /* system bus output enable */
- tmp = readl(PC0CTRL);
- tmp &= 0xfffffcff;
- writel(tmp, PC0CTRL);
-
- /*
- * SBCTRL0* does not need settings because PH1-sLD8 has no support for
- * XECS0. The boot swap must be enabled to boot from the support card.
- */
-
- if (boot_is_swapped()) {
- /* XECS1 : boot memory if boot swap is on */
- writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
- writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
- writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
- writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
- }
-
- /* XECS4 : sub memory */
- writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40);
- writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41);
- writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42);
- writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44);
-
- /* XECS5 : peripherals */
- writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50);
- writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51);
- writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52);
- writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54);
-
- /* base address regsiters */
- writel(0x0000bc01, SBBASE0); /* boot memory */
- writel(0x0900bfff, SBBASE1); /* dummy */
- writel(0x0400bc01, SBBASE4); /* sub memory */
- writel(0x0800bf01, SBBASE5); /* peripherals */
-
- sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */
- sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */
-
- /* dummy read to assure write process */
- readl(SG_PINCTRL(0));
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c b/arch/arm/mach-uniphier/ph1-sld8/sg_init.c
deleted file mode 100644
index a808289..0000000
--- a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-ld4/sg_init.c"
diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile b/arch/arm/mach-uniphier/pinctrl/Makefile
new file mode 100644
index 0000000..8517595
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pinctrl-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += pinctrl-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += pinctrl-ph1-ld6b.o
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c
new file mode 100644
index 0000000..160d3ef
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void ph1_ld4_pin_init(void)
+{
+ u32 tmp;
+
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(158, 0, 8, 4); /* XNFRE -> XNFRE_GB */
+ sg_set_pinsel(159, 0, 8, 4); /* XNFWE -> XNFWE_GB */
+ sg_set_pinsel(160, 0, 8, 4); /* XFALE -> NFALE_GB */
+ sg_set_pinsel(161, 0, 8, 4); /* XFCLE -> NFCLE_GB */
+ sg_set_pinsel(162, 0, 8, 4); /* XNFWP -> XFNWP_GB */
+ sg_set_pinsel(163, 0, 8, 4); /* XNFCE0 -> XNFCE0_GB */
+ sg_set_pinsel(164, 0, 8, 4); /* NANDRYBY0 -> NANDRYBY0_GB */
+ sg_set_pinsel(22, 0, 8, 4); /* MMCCLK -> XFNCE1_GB */
+ sg_set_pinsel(23, 0, 8, 4); /* MMCCMD -> NANDRYBY1_GB */
+ sg_set_pinsel(24, 0, 8, 4); /* MMCDAT0 -> NFD0_GB */
+ sg_set_pinsel(25, 0, 8, 4); /* MMCDAT1 -> NFD1_GB */
+ sg_set_pinsel(26, 0, 8, 4); /* MMCDAT2 -> NFD2_GB */
+ sg_set_pinsel(27, 0, 8, 4); /* MMCDAT3 -> NFD3_GB */
+ sg_set_pinsel(28, 0, 8, 4); /* MMCDAT4 -> NFD4_GB */
+ sg_set_pinsel(29, 0, 8, 4); /* MMCDAT5 -> NFD5_GB */
+ sg_set_pinsel(30, 0, 8, 4); /* MMCDAT6 -> NFD6_GB */
+ sg_set_pinsel(31, 0, 8, 4); /* MMCDAT7 -> NFD7_GB */
+#endif
+
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ sg_set_pinsel(53, 0, 8, 4); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(54, 0, 8, 4); /* USB0OD -> USB0OD */
+ sg_set_pinsel(55, 0, 8, 4); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(56, 0, 8, 4); /* USB1OD -> USB1OD */
+ /* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */
+ /* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */
+#endif
+
+ tmp = readl(SG_IECTRL);
+ tmp |= 0x41;
+ writel(tmp, SG_IECTRL);
+}
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c
new file mode 100644
index 0000000..4f950d3
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void ph1_ld6b_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(30, 0, 8, 4); /* XNFRE -> XNFRE */
+ sg_set_pinsel(31, 0, 8, 4); /* XNFWE -> XNFWE */
+ sg_set_pinsel(32, 0, 8, 4); /* NFALE -> NFALE */
+ sg_set_pinsel(33, 0, 8, 4); /* NFCLE -> NFCLE */
+ sg_set_pinsel(34, 0, 8, 4); /* XNFWP -> XNFWP */
+ sg_set_pinsel(35, 0, 8, 4); /* XNFCE0 -> XNFCE0 */
+ sg_set_pinsel(36, 0, 8, 4); /* NRYBY0 -> NRYBY0 */
+ sg_set_pinsel(37, 0, 8, 4); /* XNFCE1 -> NRYBY1 */
+ sg_set_pinsel(38, 0, 8, 4); /* NRYBY1 -> XNFCE1 */
+ sg_set_pinsel(39, 0, 8, 4); /* NFD0 -> NFD0 */
+ sg_set_pinsel(40, 0, 8, 4); /* NFD1 -> NFD1 */
+ sg_set_pinsel(41, 0, 8, 4); /* NFD2 -> NFD2 */
+ sg_set_pinsel(42, 0, 8, 4); /* NFD3 -> NFD3 */
+ sg_set_pinsel(43, 0, 8, 4); /* NFD4 -> NFD4 */
+ sg_set_pinsel(44, 0, 8, 4); /* NFD5 -> NFD5 */
+ sg_set_pinsel(45, 0, 8, 4); /* NFD6 -> NFD6 */
+ sg_set_pinsel(46, 0, 8, 4); /* NFD7 -> NFD7 */
+#endif
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ sg_set_pinsel(56, 0, 8, 4); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(57, 0, 8, 4); /* USB0OD -> USB0OD */
+ sg_set_pinsel(58, 0, 8, 4); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(59, 0, 8, 4); /* USB1OD -> USB1OD */
+ sg_set_pinsel(60, 0, 8, 4); /* USB2VBUS -> USB2VBUS */
+ sg_set_pinsel(61, 0, 8, 4); /* USB2OD -> USB2OD */
+ sg_set_pinsel(62, 0, 8, 4); /* USB3VBUS -> USB3VBUS */
+ sg_set_pinsel(63, 0, 8, 4); /* USB3OD -> USB3OD */
+#endif
+}
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c
new file mode 100644
index 0000000..f50644c
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void ph1_pro4_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(40, 0, 4, 8); /* NFD0 -> NFD0 */
+ sg_set_pinsel(41, 0, 4, 8); /* NFD1 -> NFD1 */
+ sg_set_pinsel(42, 0, 4, 8); /* NFD2 -> NFD2 */
+ sg_set_pinsel(43, 0, 4, 8); /* NFD3 -> NFD3 */
+ sg_set_pinsel(44, 0, 4, 8); /* NFD4 -> NFD4 */
+ sg_set_pinsel(45, 0, 4, 8); /* NFD5 -> NFD5 */
+ sg_set_pinsel(46, 0, 4, 8); /* NFD6 -> NFD6 */
+ sg_set_pinsel(47, 0, 4, 8); /* NFD7 -> NFD7 */
+ sg_set_pinsel(48, 0, 4, 8); /* NFALE -> NFALE */
+ sg_set_pinsel(49, 0, 4, 8); /* NFCLE -> NFCLE */
+ sg_set_pinsel(50, 0, 4, 8); /* XNFRE -> XNFRE */
+ sg_set_pinsel(51, 0, 4, 8); /* XNFWE -> XNFWE */
+ sg_set_pinsel(52, 0, 4, 8); /* XNFWP -> XNFWP */
+ sg_set_pinsel(53, 0, 4, 8); /* XNFCE0 -> XNFCE0 */
+ sg_set_pinsel(54, 0, 4, 8); /* NRYBY0 -> NRYBY0 */
+ /* sg_set_pinsel(131, 1, 4, 8); */ /* RXD2 -> NRYBY1 */
+ /* sg_set_pinsel(132, 1, 4, 8); */ /* TXD2 -> XNFCE1 */
+#endif
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ sg_set_pinsel(180, 0, 4, 8); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(181, 0, 4, 8); /* USB0OD -> USB0OD */
+ sg_set_pinsel(182, 0, 4, 8); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(183, 0, 4, 8); /* USB1OD -> USB1OD */
+#endif
+
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ sg_set_pinsel(184, 0, 4, 8); /* USB2VBUS -> USB2VBUS */
+ sg_set_pinsel(185, 0, 4, 8); /* USB2OD -> USB2OD */
+ sg_set_pinsel(187, 0, 4, 8); /* USB3VBUS -> USB3VBUS */
+ sg_set_pinsel(188, 0, 4, 8); /* USB3OD -> USB3OD */
+#endif
+
+ writel(1, SG_LOADPINCTRL);
+}
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c
new file mode 100644
index 0000000..a6cc082
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void ph1_pro5_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(19, 0, 4, 8); /* XNFRE -> XNFRE */
+ sg_set_pinsel(20, 0, 4, 8); /* XNFWE -> XNFWE */
+ sg_set_pinsel(21, 0, 4, 8); /* NFALE -> NFALE */
+ sg_set_pinsel(22, 0, 4, 8); /* NFCLE -> NFCLE */
+ sg_set_pinsel(23, 0, 4, 8); /* XNFWP -> XNFWP */
+ sg_set_pinsel(24, 0, 4, 8); /* XNFCE0 -> XNFCE0 */
+ sg_set_pinsel(25, 0, 4, 8); /* NRYBY0 -> NRYBY0 */
+ sg_set_pinsel(26, 0, 4, 8); /* XNFCE1 -> XNFCE1 */
+ sg_set_pinsel(27, 0, 4, 8); /* NRYBY1 -> NRYBY1 */
+ sg_set_pinsel(28, 0, 4, 8); /* NFD0 -> NFD0 */
+ sg_set_pinsel(29, 0, 4, 8); /* NFD1 -> NFD1 */
+ sg_set_pinsel(30, 0, 4, 8); /* NFD2 -> NFD2 */
+ sg_set_pinsel(31, 0, 4, 8); /* NFD3 -> NFD3 */
+ sg_set_pinsel(32, 0, 4, 8); /* NFD4 -> NFD4 */
+ sg_set_pinsel(33, 0, 4, 8); /* NFD5 -> NFD5 */
+ sg_set_pinsel(34, 0, 4, 8); /* NFD6 -> NFD6 */
+ sg_set_pinsel(35, 0, 4, 8); /* NFD7 -> NFD7 */
+#endif
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ sg_set_pinsel(124, 0, 4, 8); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(125, 0, 4, 8); /* USB0OD -> USB0OD */
+ sg_set_pinsel(126, 0, 4, 8); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(127, 0, 4, 8); /* USB1OD -> USB1OD */
+#endif
+
+ writel(1, SG_LOADPINCTRL);
+}
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c
new file mode 100644
index 0000000..f1b2bbb
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void ph1_sld3_pin_init(void)
+{
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ sg_set_pinsel(13, 0, 4, 4); /* USB0OC */
+ sg_set_pinsel(14, 1, 4, 4); /* USB0VBUS */
+
+ sg_set_pinsel(15, 0, 4, 4); /* USB1OC */
+ sg_set_pinsel(16, 1, 4, 4); /* USB1VBUS */
+
+ sg_set_pinsel(17, 0, 4, 4); /* USB2OC */
+ sg_set_pinsel(18, 1, 4, 4); /* USB2VBUS */
+
+ sg_set_pinsel(19, 0, 4, 4); /* USB3OC */
+ sg_set_pinsel(20, 1, 4, 4); /* USB3VBUS */
+#endif
+}
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c
new file mode 100644
index 0000000..f936a53
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void ph1_sld8_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(15, 0, 8, 4); /* XNFRE_GB -> XNFRE_GB */
+ sg_set_pinsel(16, 0, 8, 4); /* XNFWE_GB -> XNFWE_GB */
+ sg_set_pinsel(17, 0, 8, 4); /* XFALE_GB -> NFALE_GB */
+ sg_set_pinsel(18, 0, 8, 4); /* XFCLE_GB -> NFCLE_GB */
+ sg_set_pinsel(19, 0, 8, 4); /* XNFWP_GB -> XFNWP_GB */
+ sg_set_pinsel(20, 0, 8, 4); /* XNFCE0_GB -> XNFCE0_GB */
+ sg_set_pinsel(21, 0, 8, 4); /* NANDRYBY0_GB -> NANDRYBY0_GB */
+ sg_set_pinsel(22, 0, 8, 4); /* XFNCE1_GB -> XFNCE1_GB */
+ sg_set_pinsel(23, 0, 8, 4); /* NANDRYBY1_GB -> NANDRYBY1_GB */
+ sg_set_pinsel(24, 0, 8, 4); /* NFD0_GB -> NFD0_GB */
+ sg_set_pinsel(25, 0, 8, 4); /* NFD1_GB -> NFD1_GB */
+ sg_set_pinsel(26, 0, 8, 4); /* NFD2_GB -> NFD2_GB */
+ sg_set_pinsel(27, 0, 8, 4); /* NFD3_GB -> NFD3_GB */
+ sg_set_pinsel(28, 0, 8, 4); /* NFD4_GB -> NFD4_GB */
+ sg_set_pinsel(29, 0, 8, 4); /* NFD5_GB -> NFD5_GB */
+ sg_set_pinsel(30, 0, 8, 4); /* NFD6_GB -> NFD6_GB */
+ sg_set_pinsel(31, 0, 8, 4); /* NFD7_GB -> NFD7_GB */
+#endif
+
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ sg_set_pinsel(41, 0, 8, 4); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(42, 0, 8, 4); /* USB0OD -> USB0OD */
+ sg_set_pinsel(43, 0, 8, 4); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(44, 0, 8, 4); /* USB1OD -> USB1OD */
+ /* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */
+ /* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */
+#endif
+}
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c
new file mode 100644
index 0000000..96abd02
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void proxstream2_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(30, 8, 8, 4); /* XNFRE -> XNFRE */
+ sg_set_pinsel(31, 8, 8, 4); /* XNFWE -> XNFWE */
+ sg_set_pinsel(32, 8, 8, 4); /* NFALE -> NFALE */
+ sg_set_pinsel(33, 8, 8, 4); /* NFCLE -> NFCLE */
+ sg_set_pinsel(34, 8, 8, 4); /* XNFWP -> XNFWP */
+ sg_set_pinsel(35, 8, 8, 4); /* XNFCE0 -> XNFCE0 */
+ sg_set_pinsel(36, 8, 8, 4); /* NRYBY0 -> NRYBY0 */
+ sg_set_pinsel(37, 8, 8, 4); /* XNFCE1 -> NRYBY1 */
+ sg_set_pinsel(38, 8, 8, 4); /* NRYBY1 -> XNFCE1 */
+ sg_set_pinsel(39, 8, 8, 4); /* NFD0 -> NFD0 */
+ sg_set_pinsel(40, 8, 8, 4); /* NFD1 -> NFD1 */
+ sg_set_pinsel(41, 8, 8, 4); /* NFD2 -> NFD2 */
+ sg_set_pinsel(42, 8, 8, 4); /* NFD3 -> NFD3 */
+ sg_set_pinsel(43, 8, 8, 4); /* NFD4 -> NFD4 */
+ sg_set_pinsel(44, 8, 8, 4); /* NFD5 -> NFD5 */
+ sg_set_pinsel(45, 8, 8, 4); /* NFD6 -> NFD6 */
+ sg_set_pinsel(46, 8, 8, 4); /* NFD7 -> NFD7 */
+#endif
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ sg_set_pinsel(56, 8, 8, 4); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(57, 8, 8, 4); /* USB0OD -> USB0OD */
+ sg_set_pinsel(58, 8, 8, 4); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(59, 8, 8, 4); /* USB1OD -> USB1OD */
+ sg_set_pinsel(60, 8, 8, 4); /* USB2VBUS -> USB2VBUS */
+ sg_set_pinsel(61, 8, 8, 4); /* USB2OD -> USB2OD */
+ sg_set_pinsel(62, 8, 8, 4); /* USB3VBUS -> USB3VBUS */
+ sg_set_pinsel(63, 8, 8, 4); /* USB3OD -> USB3OD */
+#endif
+}
diff --git a/arch/arm/mach-uniphier/pll/Makefile b/arch/arm/mach-uniphier/pll/Makefile
new file mode 100644
index 0000000..d33f99e
--- /dev/null
+++ b/arch/arm/mach-uniphier/pll/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pll-init-ph1-sld3.o \
+ pll-spectrum-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pll-init-ph1-ld4.o \
+ pll-spectrum-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pll-init-ph1-pro4.o \
+ pll-spectrum-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pll-init-ph1-sld8.o \
+ pll-spectrum-ph1-ld4.o
diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c
similarity index 90%
rename from arch/arm/mach-uniphier/ph1-ld4/pll_init.c
rename to arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c
index f8ec2b6..a272a90 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c
@@ -5,13 +5,15 @@
*/
#include <common.h>
+#include <linux/err.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
#include <mach/sg-regs.h>
#undef DPLL_SSC_RATE_1PER
-static void dpll_init(void)
+static int dpll_init(unsigned int dram_freq)
{
u32 tmp;
@@ -22,13 +24,17 @@
*/
tmp = readl(SC_DPLLCTRL);
tmp &= ~0x000f0000;
-#if CONFIG_DDR_FREQ == 1600
- tmp |= 0x000c0000;
-#elif CONFIG_DDR_FREQ == 1333
- tmp |= 0x000d0000;
-#else
-# error "Unknown frequency"
-#endif
+ switch (dram_freq) {
+ case 1333:
+ tmp |= 0x000d0000;
+ break;
+ case 1600:
+ tmp |= 0x000c0000;
+ break;
+ default:
+ pr_err("Unsupported frequency");
+ return -EINVAL;
+ }
#if defined(DPLL_SSC_RATE_1PER)
tmp &= ~SC_DPLLCTRL_SSC_RATE;
@@ -40,6 +46,8 @@
tmp = readl(SC_DPLLCTRL2);
tmp |= SC_DPLLCTRL2_NRSTDS;
writel(tmp, SC_DPLLCTRL2);
+
+ return 0;
}
static void upll_init(void)
@@ -174,9 +182,13 @@
writel(tmp, SC_VPLL27BCTRL);
}
-void pll_init(void)
+int ph1_ld4_pll_init(const struct uniphier_board_data *bd)
{
- dpll_init();
+ int ret;
+
+ ret = dpll_init(bd->dram_freq);
+ if (ret)
+ return ret;
upll_init();
vpll_init();
@@ -186,4 +198,6 @@
* so 20 usec can be saved here.
*/
udelay(480);
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c
similarity index 88%
rename from arch/arm/mach-uniphier/ph1-pro4/pll_init.c
rename to arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c
index d693368..906c22f 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c
@@ -5,13 +5,15 @@
*/
#include <common.h>
+#include <linux/err.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
#include <mach/sg-regs.h>
#undef DPLL_SSC_RATE_1PER
-static void dpll_init(void)
+static int dpll_init(unsigned int dram_freq)
{
u32 tmp;
@@ -22,13 +24,17 @@
*/
tmp = readl(SC_DPLLCTRL);
tmp &= ~(0x000f0000);
-#if CONFIG_DDR_FREQ == 1600
- tmp |= 0x000c0000;
-#elif CONFIG_DDR_FREQ == 1333
- tmp |= 0x000d0000;
-#else
-# error "Unsupported frequency"
-#endif
+ switch (dram_freq) {
+ case 1333:
+ tmp |= 0x000d0000;
+ break;
+ case 1600:
+ tmp |= 0x000c0000;
+ break;
+ default:
+ pr_err("Unsupported frequency");
+ return -EINVAL;
+ }
/*
* Set Moduration rate
@@ -44,6 +50,8 @@
tmp = readl(SC_DPLLCTRL2);
tmp |= SC_DPLLCTRL2_NRSTDS;
writel(tmp, SC_DPLLCTRL2);
+
+ return 0;
}
static void vpll_init(void)
@@ -54,12 +62,10 @@
tmp = readl(SG_PINMON0);
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-#if defined(CONFIG_MACH_PH1_PRO4)
/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
return;
-#endif
/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
tmp = readl(SC_VPLL27ACTRL);
@@ -138,9 +144,13 @@
writel(tmp, SC_VPLL27BCTRL);
}
-void pll_init(void)
+int ph1_pro4_pll_init(const struct uniphier_board_data *bd)
{
- dpll_init();
+ int ret;
+
+ ret = dpll_init(bd->dram_freq);
+ if (ret)
+ return ret;
vpll_init();
/*
@@ -148,4 +158,6 @@
* We wait 1 usec in vpll_init() so 1 usec can be saved here.
*/
udelay(499);
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c
similarity index 61%
rename from arch/arm/mach-uniphier/ph1-sld3/pll_init.c
rename to arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c
index ebd1c31..6294a45 100644
--- a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c
@@ -4,7 +4,10 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-void pll_init(void)
+#include <mach/init.h>
+
+int ph1_sld3_pll_init(const struct uniphier_board_data *bd)
{
/* add pll init code here */
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c
similarity index 97%
rename from arch/arm/mach-uniphier/ph1-sld8/pll_init.c
rename to arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c
index 109cb5f..f249abe 100644
--- a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c
+++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c
@@ -6,6 +6,7 @@
#include <common.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
#include <mach/sg-regs.h>
@@ -186,7 +187,7 @@
writel(tmp, SC_VPLL27BCTRL);
}
-void pll_init(void)
+int ph1_sld8_pll_init(const struct uniphier_board_data *bd)
{
dpll_init();
upll_init();
@@ -198,4 +199,6 @@
* so 20 usec can be saved here.
*/
udelay(480);
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c
similarity index 72%
copy from arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c
copy to arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c
index fcf2ad2..cad0ed8 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c
+++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c
@@ -4,15 +4,17 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
-void enable_dpll_ssc(void)
+int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd)
{
u32 tmp;
tmp = readl(SC_DPLLCTRL);
tmp |= SC_DPLLCTRL_SSC_EN;
writel(tmp, SC_DPLLCTRL);
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c
similarity index 73%
rename from arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c
rename to arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c
index fcf2ad2..43dc973 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c
+++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c
@@ -6,13 +6,16 @@
#include <common.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sc-regs.h>
-void enable_dpll_ssc(void)
+int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd)
{
u32 tmp;
tmp = readl(SC_DPLLCTRL);
tmp |= SC_DPLLCTRL_SSC_EN;
writel(tmp, SC_DPLLCTRL);
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/print_misc_info.c b/arch/arm/mach-uniphier/print_misc_info.c
index 22ea512..5140b0c 100644
--- a/arch/arm/mach-uniphier/print_misc_info.c
+++ b/arch/arm/mach-uniphier/print_misc_info.c
@@ -5,7 +5,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <mach/board.h>
+#include <mach/micro-support-card.h>
int misc_init_f(void)
{
diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile
new file mode 100644
index 0000000..db622d2
--- /dev/null
+++ b/arch/arm/mach-uniphier/sbc/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += sbc-ph1-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += sbc-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += sbc-proxstream2.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += sbc-proxstream2.o
diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c
similarity index 67%
rename from arch/arm/mach-uniphier/ph1-ld4/sbc_init.c
rename to arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c
index 8e25792..929f50a 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c
+++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c
@@ -6,10 +6,11 @@
#include <common.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sbc-regs.h>
#include <mach/sg-regs.h>
-void sbc_init(void)
+int ph1_ld4_sbc_init(const struct uniphier_board_data *bd)
{
u32 tmp;
@@ -30,20 +31,22 @@
if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
- * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
+ * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
*
- * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank
- * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
+ * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
+ * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
} else {
/*
* Boot Swap Off: boot from mask ROM
- * 0x00000000-0x01ffffff: mask ROM
- * 0x02000000-0x03efffff: memory bank (31MB)
- * 0x03f00000-0x03ffffff: peripherals (1MB)
+ * 0x40000000-0x41ffffff: mask ROM
+ * 0x42000000-0x43efffff: memory bank (31MB)
+ * 0x43f00000-0x43ffffff: peripherals (1MB)
*/
writel(0x0000be01, SBBASE0); /* dummy */
writel(0x0200be01, SBBASE1);
}
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c
similarity index 64%
rename from arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
rename to arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c
index 533739c..1032c54 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
+++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c
@@ -6,10 +6,11 @@
#include <common.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sbc-regs.h>
#include <mach/sg-regs.h>
-void sbc_init(void)
+int ph1_pro4_sbc_init(const struct uniphier_board_data *bd)
{
/*
* Only CS1 is connected to support card.
@@ -23,20 +24,22 @@
if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
- * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
+ * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
*
- * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank
- * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
+ * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
+ * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
} else {
/*
* Boot Swap Off: boot from mask ROM
- * 0x00000000-0x01ffffff: mask ROM
- * 0x02000000-0x03efffff: memory bank (31MB)
- * 0x03f00000-0x03ffffff: peripherals (1MB)
+ * 0x40000000-0x41ffffff: mask ROM
+ * 0x42000000-0x43efffff: memory bank (31MB)
+ * 0x43f00000-0x43ffffff: peripherals (1MB)
*/
writel(0x0000be01, SBBASE0); /* dummy */
writel(0x0200be01, SBBASE1);
}
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c
similarity index 62%
rename from arch/arm/mach-uniphier/ph1-sld3/sbc_init.c
rename to arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c
index d66f89e..fb707be 100644
--- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c
+++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c
@@ -6,10 +6,11 @@
#include <common.h>
#include <linux/io.h>
+#include <mach/init.h>
#include <mach/sbc-regs.h>
#include <mach/sg-regs.h>
-void sbc_init(void)
+int ph1_sld3_sbc_init(const struct uniphier_board_data *bd)
{
/* only address/data multiplex mode is supported */
@@ -24,22 +25,24 @@
if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
- * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
+ * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
*
- * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank
- * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
+ * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
+ * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
} else {
/*
* Boot Swap Off: boot from mask ROM
- * 0x00000000-0x01ffffff: mask ROM
- * 0x02000000-0x03efffff: memory bank (31MB)
- * 0x03f00000-0x03ffffff: peripherals (1MB)
+ * 0x40000000-0x41ffffff: mask ROM
+ * 0x42000000-0x43efffff: memory bank (31MB)
+ * 0x43f00000-0x43ffffff: peripherals (1MB)
*/
writel(0x0000be01, SBBASE0); /* dummy */
writel(0x0200be01, SBBASE1);
}
- sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */
+ sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */
+
+ return 0;
}
diff --git a/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c
new file mode 100644
index 0000000..9c3aeb7
--- /dev/null
+++ b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sbc-regs.h>
+#include <mach/sg-regs.h>
+
+int proxstream2_sbc_init(const struct uniphier_board_data *bd)
+{
+ /* necessary for ROM boot ?? */
+ /* system bus output enable */
+ writel(0x17, PC0CTRL);
+
+ /*
+ * Only CS1 is connected to support card.
+ * BKSZ[1:0] should be set to "01".
+ */
+ writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
+ writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
+ writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
+ writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
+
+ if (boot_is_swapped()) {
+ /*
+ * Boot Swap On: boot from external NOR/SRAM
+ * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
+ *
+ * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
+ * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
+ */
+ writel(0x0000bc01, SBBASE0);
+ } else {
+ /*
+ * Boot Swap Off: boot from mask ROM
+ * 0x40000000-0x41ffffff: mask ROM
+ * 0x42000000-0x43efffff: memory bank (31MB)
+ * 0x43f00000-0x43ffffff: peripherals (1MB)
+ */
+ writel(0x0000be01, SBBASE0); /* dummy */
+ writel(0x0200be01, SBBASE1);
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-uniphier/soc_info.c b/arch/arm/mach-uniphier/soc_info.c
new file mode 100644
index 0000000..3e8e7f4
--- /dev/null
+++ b/arch/arm/mach-uniphier/soc_info.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <mach/sg-regs.h>
+#include <mach/soc_info.h>
+
+#if UNIPHIER_MULTI_SOC
+enum uniphier_soc_id uniphier_get_soc_type(void)
+{
+ u32 revision = readl(SG_REVISION);
+ enum uniphier_soc_id ret;
+
+ switch ((revision & SG_REVISION_TYPE_MASK) >> SG_REVISION_TYPE_SHIFT) {
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD3
+ case 0x25:
+ ret = SOC_UNIPHIER_PH1_SLD3;
+ break;
+#endif
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD4
+ case 0x26:
+ ret = SOC_UNIPHIER_PH1_LD4;
+ break;
+#endif
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_PRO4
+ case 0x28:
+ ret = SOC_UNIPHIER_PH1_PRO4;
+ break;
+#endif
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD8
+ case 0x29:
+ ret = SOC_UNIPHIER_PH1_SLD8;
+ break;
+#endif
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_PRO5
+ case 0x2A:
+ ret = SOC_UNIPHIER_PH1_PRO5;
+ break;
+#endif
+#ifdef CONFIG_ARCH_UNIPHIER_PROXSTREAM2
+ case 0x2E:
+ ret = SOC_UNIPHIER_PROXSTREAM2;
+ break;
+#endif
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD6B
+ case 0x2F:
+ ret = SOC_UNIPHIER_PH1_LD6B;
+ break;
+#endif
+ default:
+ ret = SOC_UNIPHIER_UNKNOWN;
+ break;
+ }
+
+ return ret;
+}
+#endif
diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c
deleted file mode 100644
index a34d3a1..0000000
--- a/arch/arm/mach-uniphier/spl.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2013-2015 Panasonic Corporation
- * Copyright (C) 2015 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <spl.h>
-#include <linux/compiler.h>
-#include <mach/led.h>
-#include <mach/board.h>
-
-void __weak bcu_init(void)
-{
-};
-void sbc_init(void);
-void sg_init(void);
-void pll_init(void);
-void pin_init(void);
-void memconf_init(void);
-void early_clkrst_init(void);
-void early_pin_init(void);
-int umc_init(void);
-void enable_dpll_ssc(void);
-
-void spl_board_init(void)
-{
- bcu_init();
-
- sbc_init();
-
- sg_init();
-
- uniphier_board_reset();
-
- pll_init();
-
- uniphier_board_init();
-
- led_write(L, 0, , );
-
- memconf_init();
-
- led_write(L, 1, , );
-
- early_clkrst_init();
-
- led_write(L, 2, , );
-
- early_pin_init();
-
- led_write(L, 3, , );
-
-#ifdef CONFIG_SPL_SERIAL_SUPPORT
- preloader_console_init();
-#endif
-
- led_write(L, 4, , );
-
- {
- int res;
-
- res = umc_init();
- if (res < 0) {
- while (1)
- ;
- }
- }
- led_write(L, 5, , );
-
- enable_dpll_ssc();
-
- led_write(L, 6, , );
-}
diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c
deleted file mode 100644
index ea85b20..0000000
--- a/arch/arm/mach-uniphier/support_card.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/board.h>
-
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-
-#define PFC_MICRO_SUPPORT_CARD_RESET \
- ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034)
-#define PFC_MICRO_SUPPORT_CARD_REVISION \
- ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0)
-/*
- * 0: reset deassert, 1: reset
- *
- * bit[0]: LAN, I2C, LED
- * bit[1]: UART
- */
-void support_card_reset_deassert(void)
-{
- writel(0, PFC_MICRO_SUPPORT_CARD_RESET);
-}
-
-void support_card_reset(void)
-{
- writel(3, PFC_MICRO_SUPPORT_CARD_RESET);
-}
-
-static int support_card_show_revision(void)
-{
- u32 revision;
-
- revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION);
- printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf);
- return 0;
-}
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-
-#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \
- ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300)
-#define DCC_MICRO_SUPPORT_CARD_RESET_UART \
- ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304)
-#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \
- ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308)
-#define DCC_MICRO_SUPPORT_CARD_REVISION \
- ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0)
-
-void support_card_reset_deassert(void)
-{
- writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */
- writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */
- writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */
-}
-
-void support_card_reset(void)
-{
- writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */
- writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */
- writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */
-}
-
-static int support_card_show_revision(void)
-{
- u32 revision;
-
- revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION);
-
- if (revision >= 0x67) {
- printf("(DCC CPLD version 3.%d.%d)\n",
- revision >> 4, revision & 0xf);
- return 0;
- } else {
- printf("(DCC CPLD unknown version)\n");
- return -1;
- }
-}
-#endif
-
-int check_support_card(void)
-{
- printf("SC: Micro Support Card ");
- return support_card_show_revision();
-}
-
-void support_card_init(void)
-{
- /*
- * After power on, we need to keep the LAN controller in reset state
- * for a while. (200 usec)
- * Fortunately, enough wait time is already inserted in pll_init()
- * function. So we do not have to wait here.
- */
- support_card_reset_deassert();
-}
-
-#if defined(CONFIG_SMC911X)
-#include <netdev.h>
-
-int board_eth_init(bd_t *bis)
-{
- return smc911x_initialize(0, CONFIG_SMC911X_BASE);
-}
-#endif
-
-#if !defined(CONFIG_SYS_NO_FLASH)
-
-#include <mtd/cfi_flash.h>
-#include <mach/sbc-regs.h>
-
-struct memory_bank {
- phys_addr_t base;
- unsigned long size;
-};
-
-static int mem_is_flash(const struct memory_bank *mem)
-{
- const int loop = 128;
- u32 *scratch_addr;
- u32 saved_value;
- int ret = 1;
- int i;
-
- /* just in case, use the tail of the memory bank */
- scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
- sizeof(u32) * loop, MAP_NOCACHE);
-
- for (i = 0; i < loop; i++, scratch_addr++) {
- saved_value = readl(scratch_addr);
- writel(~saved_value, scratch_addr);
- if (readl(scratch_addr) != saved_value) {
- /* We assume no memory or SRAM here. */
- writel(saved_value, scratch_addr);
- ret = 0;
- break;
- }
- }
-
- unmap_physmem(scratch_addr, MAP_NOCACHE);
-
- return ret;
-}
-
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
- /* {address, size} */
-static const struct memory_bank memory_banks_boot_swap_off[] = {
- {0x02000000, 0x01f00000},
-};
-
-static const struct memory_bank memory_banks_boot_swap_on[] = {
- {0x00000000, 0x01f00000},
-};
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-static const struct memory_bank memory_banks_boot_swap_off[] = {
- {0x04000000, 0x02000000},
-};
-
-static const struct memory_bank memory_banks_boot_swap_on[] = {
- {0x00000000, 0x02000000},
- {0x04000000, 0x02000000},
-};
-#endif
-
-static const struct memory_bank
-*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
-
-phys_addr_t cfi_flash_bank_addr(int i)
-{
- return flash_banks_list[i]->base;
-}
-
-unsigned long cfi_flash_bank_size(int i)
-{
- return flash_banks_list[i]->size;
-}
-
-static void detect_num_flash_banks(void)
-{
- const struct memory_bank *memory_bank, *end;
-
- cfi_flash_num_flash_banks = 0;
-
- if (boot_is_swapped()) {
- memory_bank = memory_banks_boot_swap_on;
- end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on);
- } else {
- memory_bank = memory_banks_boot_swap_off;
- end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off);
- }
-
- for (; memory_bank < end; memory_bank++) {
- if (cfi_flash_num_flash_banks >=
- CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
- break;
-
- if (mem_is_flash(memory_bank)) {
- flash_banks_list[cfi_flash_num_flash_banks] =
- memory_bank;
-
- debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
- memory_bank->base, memory_bank->size);
- cfi_flash_num_flash_banks++;
- }
- }
-
- debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
-}
-#else /* CONFIG_SYS_NO_FLASH */
-void detect_num_flash_banks(void)
-{
-};
-#endif /* CONFIG_SYS_NO_FLASH */
-
-void support_card_late_init(void)
-{
- detect_num_flash_banks();
-}
diff --git a/arch/arm/mach-uniphier/umc/Makefile b/arch/arm/mach-uniphier/umc/Makefile
new file mode 100644
index 0000000..dd35e77
--- /dev/null
+++ b/arch/arm/mach-uniphier/umc/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += umc-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o
diff --git a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c
similarity index 87%
rename from arch/arm/mach-uniphier/ph1-ld4/umc_init.c
rename to arch/arm/mach-uniphier/umc/umc-ph1-ld4.c
index a7a4157..8124685 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c
+++ b/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c
@@ -5,7 +5,10 @@
*/
#include <common.h>
+#include <linux/err.h>
#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
#include <mach/umc-regs.h>
#include <mach/ddrphy-regs.h>
@@ -136,14 +139,14 @@
writel(0x00000101, dramcont0 + UMC_DIOCTLA);
- ddrphy_init(phy0_0, freq, size_ch0);
+ ph1_ld4_ddrphy_init(phy0_0, freq, size_ch0);
ddrphy_prepare_training(phy0_0, 0);
ddrphy_training(phy0_0);
writel(0x00000101, dramcont1 + UMC_DIOCTLA);
- ddrphy_init(phy1_0, freq, size_ch1);
+ ph1_ld4_ddrphy_init(phy1_0, freq, size_ch1);
ddrphy_prepare_training(phy1_0, 1);
ddrphy_training(phy1_0);
@@ -156,16 +159,17 @@
return 0;
}
-int umc_init(void)
+int ph1_ld4_umc_init(const struct uniphier_board_data *bd)
{
- return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000,
- CONFIG_SDRAM1_SIZE / 0x08000000);
+ if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) &&
+ (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) &&
+ (bd->dram_freq == 1333 || bd->dram_freq == 1600) &&
+ bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) {
+ return umc_init_sub(bd->dram_freq,
+ bd->dram_ch0_size / SZ_128M,
+ bd->dram_ch1_size / SZ_128M);
+ } else {
+ pr_err("Unsupported DDR configuration\n");
+ return -EINVAL;
+ }
}
-
-#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \
- (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \
- CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1
-/* OK */
-#else
-#error Unsupported DDR configuration.
-#endif
diff --git a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c
similarity index 85%
rename from arch/arm/mach-uniphier/ph1-pro4/umc_init.c
rename to arch/arm/mach-uniphier/umc/umc-ph1-pro4.c
index bd8b9d8..8c9f057 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c
+++ b/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c
@@ -5,7 +5,10 @@
*/
#include <common.h>
+#include <linux/err.h>
#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
#include <mach/umc-regs.h>
#include <mach/ddrphy-regs.h>
@@ -107,28 +110,28 @@
writel(0x00000101, dramcont0 + UMC_DIOCTLA);
- ddrphy_init(phy0_0, freq, size_ch0);
+ ph1_pro4_ddrphy_init(phy0_0, freq, size_ch0);
ddrphy_prepare_training(phy0_0, 0);
ddrphy_training(phy0_0);
writel(0x00000103, dramcont0 + UMC_DIOCTLA);
- ddrphy_init(phy0_1, freq, size_ch0);
+ ph1_pro4_ddrphy_init(phy0_1, freq, size_ch0);
ddrphy_prepare_training(phy0_1, 1);
ddrphy_training(phy0_1);
writel(0x00000101, dramcont1 + UMC_DIOCTLA);
- ddrphy_init(phy1_0, freq, size_ch1);
+ ph1_pro4_ddrphy_init(phy1_0, freq, size_ch1);
ddrphy_prepare_training(phy1_0, 0);
ddrphy_training(phy1_0);
writel(0x00000103, dramcont1 + UMC_DIOCTLA);
- ddrphy_init(phy1_1, freq, size_ch1);
+ ph1_pro4_ddrphy_init(phy1_1, freq, size_ch1);
ddrphy_prepare_training(phy1_1, 1);
ddrphy_training(phy1_1);
@@ -141,17 +144,18 @@
return 0;
}
-int umc_init(void)
+int ph1_pro4_umc_init(const struct uniphier_board_data *bd)
{
- return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000,
- CONFIG_SDRAM1_SIZE / 0x08000000);
+ if (((bd->dram_ch0_size == SZ_512M && bd->dram_ch0_width == 32) ||
+ (bd->dram_ch0_size == SZ_256M && bd->dram_ch0_width == 16)) &&
+ ((bd->dram_ch1_size == SZ_512M && bd->dram_ch1_width == 32) ||
+ (bd->dram_ch1_size == SZ_256M && bd->dram_ch1_width == 16)) &&
+ bd->dram_freq == 1600) {
+ return umc_init_sub(bd->dram_freq,
+ bd->dram_ch0_size / SZ_128M,
+ bd->dram_ch1_size / SZ_128M);
+ } else {
+ pr_err("Unsupported DDR configuration\n");
+ return -EINVAL;
+ }
}
-
-#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \
- (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \
- ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \
- (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1))
-/* OK */
-#else
- #error Unsupported DDR configuration.
-#endif
diff --git a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c
similarity index 86%
rename from arch/arm/mach-uniphier/ph1-sld8/umc_init.c
rename to arch/arm/mach-uniphier/umc/umc-ph1-sld8.c
index 7baea7e..bc60a34 100644
--- a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c
+++ b/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c
@@ -5,7 +5,10 @@
*/
#include <common.h>
+#include <linux/err.h>
#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
#include <mach/umc-regs.h>
#include <mach/ddrphy-regs.h>
@@ -116,14 +119,14 @@
writel(0x00000101, dramcont0 + UMC_DIOCTLA);
- ddrphy_init(phy0_0, freq, size_ch0);
+ ph1_sld8_ddrphy_init(phy0_0, freq, size_ch0);
ddrphy_prepare_training(phy0_0, 0);
ddrphy_training(phy0_0);
writel(0x00000101, dramcont1 + UMC_DIOCTLA);
- ddrphy_init(phy1_0, freq, size_ch1);
+ ph1_sld8_ddrphy_init(phy1_0, freq, size_ch1);
ddrphy_prepare_training(phy1_0, 1);
ddrphy_training(phy1_0);
@@ -136,16 +139,17 @@
return 0;
}
-int umc_init(void)
+int ph1_sld8_umc_init(const struct uniphier_board_data *bd)
{
- return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000,
- CONFIG_SDRAM1_SIZE / 0x08000000);
+ if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) &&
+ (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) &&
+ bd->dram_freq == 1333 &&
+ bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) {
+ return umc_init_sub(bd->dram_freq,
+ bd->dram_ch0_size / SZ_128M,
+ bd->dram_ch1_size / SZ_128M);
+ } else {
+ pr_err("Unsupported DDR configuration\n");
+ return -EINVAL;
+ }
}
-
-#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \
- (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \
- CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1
-/* OK */
-#else
-#error Unsupported DDR configuration.
-#endif
diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig
index 56c215f..e1665c0 100644
--- a/configs/ph1_ld4_defconfig
+++ b/configs/ph1_ld4_defconfig
@@ -1,7 +1,8 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
-CONFIG_MACH_PH1_LD4=y
-CONFIG_PFC_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_LD4=y
+CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref"
CONFIG_HUSH_PARSER=y
@@ -11,17 +12,19 @@
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
CONFIG_NAND_DENALI=y
CONFIG_SYS_NAND_DENALI_64BIT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_SPL_NAND_DENALI=y
CONFIG_UNIPHIER_SERIAL=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/ph1_ld6b_defconfig b/configs/ph1_ld6b_defconfig
new file mode 100644
index 0000000..68f6ba8
--- /dev/null
+++ b/configs/ph1_ld6b_defconfig
@@ -0,0 +1,30 @@
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_LD6B=y
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld6b-ref"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig
index 7624c54..aaf1f46 100644
--- a/configs/ph1_pro4_defconfig
+++ b/configs/ph1_pro4_defconfig
@@ -1,6 +1,8 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
-CONFIG_PFC_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_PRO4=y
+CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"
CONFIG_HUSH_PARSER=y
@@ -10,17 +12,19 @@
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
CONFIG_NAND_DENALI=y
CONFIG_SYS_NAND_DENALI_64BIT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_SPL_NAND_DENALI=y
CONFIG_UNIPHIER_SERIAL=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/ph1_pro5_defconfig b/configs/ph1_pro5_defconfig
new file mode 100644
index 0000000..967d0f1
--- /dev/null
+++ b/configs/ph1_pro5_defconfig
@@ -0,0 +1,30 @@
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_UNIPHIER_PH1_PRO5=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro5-4kbox"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/ph1_sld3_defconfig b/configs/ph1_sld3_defconfig
index d495132..4b871d0 100644
--- a/configs/ph1_sld3_defconfig
+++ b/configs/ph1_sld3_defconfig
@@ -1,7 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
-CONFIG_MACH_PH1_SLD3=y
-CONFIG_PFC_MICRO_SUPPORT_CARD=y
+CONFIG_ARCH_UNIPHIER_PH1_SLD3=y
+CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref"
CONFIG_HUSH_PARSER=y
@@ -11,7 +11,6 @@
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig
index 1a35a77..00917fb 100644
--- a/configs/ph1_sld8_defconfig
+++ b/configs/ph1_sld8_defconfig
@@ -1,7 +1,8 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
-CONFIG_MACH_PH1_SLD8=y
-CONFIG_PFC_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_SLD8=y
+CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref"
CONFIG_HUSH_PARSER=y
@@ -11,17 +12,19 @@
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
CONFIG_NAND_DENALI=y
CONFIG_SYS_NAND_DENALI_64BIT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_SPL_NAND_DENALI=y
CONFIG_UNIPHIER_SERIAL=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/doc/README.uniphier b/doc/README.uniphier
index e936f40..6ba0320 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -44,6 +44,18 @@
$ make ph1_sld8_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi-
+PH1-Pro5:
+ $ make ph1_pro5_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi-
+
+ProXstream2:
+ $ make pxs2_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi-
+
+PH1-LD6b:
+ $ make ph1_ld6b_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi-
+
You may wish to change the "CROSS_COMPILE=arm-linux-gnueabi-"
to use your favorite compiler.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index b8146df..3b6e3b7 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -124,4 +124,6 @@
endif
+source "drivers/pinctrl/uniphier/Kconfig"
+
endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f537df4..e56a17f 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -3,3 +3,5 @@
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o
+
+obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/
diff --git a/drivers/pinctrl/uniphier/Kconfig b/drivers/pinctrl/uniphier/Kconfig
new file mode 100644
index 0000000..2ff616e
--- /dev/null
+++ b/drivers/pinctrl/uniphier/Kconfig
@@ -0,0 +1,42 @@
+if ARCH_UNIPHIER
+
+config PINCTRL_UNIPHIER_CORE
+ bool
+
+config PINCTRL_UNIPHIER_PH1_LD4
+ bool "UniPhier PH1-LD4 SoC pinctrl driver"
+ depends on ARCH_UNIPHIER_PH1_LD4
+ default y
+ select PINCTRL_UNIPHIER_CORE
+
+config PINCTRL_UNIPHIER_PH1_PRO4
+ bool "UniPhier PH1-Pro4 SoC pinctrl driver"
+ depends on ARCH_UNIPHIER_PH1_PRO4
+ default y
+ select PINCTRL_UNIPHIER_CORE
+
+config PINCTRL_UNIPHIER_PH1_SLD8
+ bool "UniPhier PH1-sLD8 SoC pinctrl driver"
+ depends on ARCH_UNIPHIER_PH1_SLD8
+ default y
+ select PINCTRL_UNIPHIER_CORE
+
+config PINCTRL_UNIPHIER_PH1_PRO5
+ bool "UniPhier PH1-Pro5 SoC pinctrl driver"
+ depends on ARCH_UNIPHIER_PH1_PRO5
+ default y
+ select PINCTRL_UNIPHIER_CORE
+
+config PINCTRL_UNIPHIER_PROXSTREAM2
+ bool "UniPhier ProXstream2 SoC pinctrl driver"
+ depends on ARCH_UNIPHIER_PROXSTREAM2
+ default y
+ select PINCTRL_UNIPHIER_CORE
+
+config PINCTRL_UNIPHIER_PH1_LD6B
+ bool "UniPhier PH1-LD6b SoC pinctrl driver"
+ depends on ARCH_UNIPHIER_PH1_LD6B
+ default y
+ select PINCTRL_UNIPHIER_CORE
+
+endif
diff --git a/drivers/pinctrl/uniphier/Makefile b/drivers/pinctrl/uniphier/Makefile
new file mode 100644
index 0000000..e215b10
--- /dev/null
+++ b/drivers/pinctrl/uniphier/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_PINCTRL_UNIPHIER_CORE) += pinctrl-uniphier-core.o
+
+obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o
+obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o
+obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o
+obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o
+obj-$(CONFIG_PINCTRL_UNIPHIER_PROXSTREAM2) += pinctrl-proxstream2.o
+obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_LD6B) += pinctrl-ph1-ld6b.o
diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c b/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c
new file mode 100644
index 0000000..b3d47f0
--- /dev/null
+++ b/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-uniphier.h"
+
+static const struct uniphier_pinctrl_pin ph1_ld4_pins[] = {
+ UNIPHIER_PINCTRL_PIN(53, 0),
+ UNIPHIER_PINCTRL_PIN(54, 0),
+ UNIPHIER_PINCTRL_PIN(55, 0),
+ UNIPHIER_PINCTRL_PIN(56, 0),
+ UNIPHIER_PINCTRL_PIN(67, 0),
+ UNIPHIER_PINCTRL_PIN(68, 0),
+ UNIPHIER_PINCTRL_PIN(69, 0),
+ UNIPHIER_PINCTRL_PIN(70, 0),
+ UNIPHIER_PINCTRL_PIN(85, 0),
+ UNIPHIER_PINCTRL_PIN(88, 0),
+ UNIPHIER_PINCTRL_PIN(156, 0),
+};
+
+static const unsigned emmc_pins[] = {21, 22, 23, 24, 25, 26, 27};
+static const unsigned emmc_muxvals[] = {0, 1, 1, 1, 1, 1, 1};
+static const unsigned emmc_dat8_pins[] = {28, 29, 30, 31};
+static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1};
+static const unsigned i2c0_pins[] = {102, 103};
+static const unsigned i2c0_muxvals[] = {0, 0};
+static const unsigned i2c1_pins[] = {104, 105};
+static const unsigned i2c1_muxvals[] = {0, 0};
+static const unsigned i2c2_pins[] = {108, 109};
+static const unsigned i2c2_muxvals[] = {2, 2};
+static const unsigned i2c3_pins[] = {108, 109};
+static const unsigned i2c3_muxvals[] = {3, 3};
+static const unsigned nand_pins[] = {24, 25, 26, 27, 28, 29, 30, 31, 158, 159,
+ 160, 161, 162, 163, 164};
+static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0};
+static const unsigned nand_cs1_pins[] = {22, 23};
+static const unsigned nand_cs1_muxvals[] = {0, 0};
+static const unsigned sd_pins[] = {44, 45, 46, 47, 48, 49, 50, 51, 52};
+static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned uart0_pins[] = {85, 88};
+static const unsigned uart0_muxvals[] = {1, 1};
+static const unsigned uart1_pins[] = {155, 156};
+static const unsigned uart1_muxvals[] = {13, 13};
+static const unsigned uart1b_pins[] = {69, 70};
+static const unsigned uart1b_muxvals[] = {23, 23};
+static const unsigned uart2_pins[] = {128, 129};
+static const unsigned uart2_muxvals[] = {13, 13};
+static const unsigned uart3_pins[] = {110, 111};
+static const unsigned uart3_muxvals[] = {1, 1};
+static const unsigned usb0_pins[] = {53, 54};
+static const unsigned usb0_muxvals[] = {0, 0};
+static const unsigned usb1_pins[] = {55, 56};
+static const unsigned usb1_muxvals[] = {0, 0};
+static const unsigned usb2_pins[] = {155, 156};
+static const unsigned usb2_muxvals[] = {4, 4};
+static const unsigned usb2b_pins[] = {67, 68};
+static const unsigned usb2b_muxvals[] = {23, 23};
+
+static const struct uniphier_pinctrl_group ph1_ld4_groups[] = {
+ UNIPHIER_PINCTRL_GROUP(emmc),
+ UNIPHIER_PINCTRL_GROUP(emmc_dat8),
+ UNIPHIER_PINCTRL_GROUP(i2c0),
+ UNIPHIER_PINCTRL_GROUP(i2c1),
+ UNIPHIER_PINCTRL_GROUP(i2c2),
+ UNIPHIER_PINCTRL_GROUP(i2c3),
+ UNIPHIER_PINCTRL_GROUP(nand),
+ UNIPHIER_PINCTRL_GROUP(nand_cs1),
+ UNIPHIER_PINCTRL_GROUP(sd),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart1b),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart3),
+ UNIPHIER_PINCTRL_GROUP(usb0),
+ UNIPHIER_PINCTRL_GROUP(usb1),
+ UNIPHIER_PINCTRL_GROUP(usb2),
+ UNIPHIER_PINCTRL_GROUP(usb2b),
+};
+
+static const char * const ph1_ld4_functions[] = {
+ "emmc",
+ "i2c0",
+ "i2c1",
+ "i2c2",
+ "i2c3",
+ "nand",
+ "sd",
+ "uart0",
+ "uart1",
+ "uart2",
+ "uart3",
+ "usb0",
+ "usb1",
+ "usb2",
+};
+
+static struct uniphier_pinctrl_socdata ph1_ld4_pinctrl_socdata = {
+ .pins = ph1_ld4_pins,
+ .pins_count = ARRAY_SIZE(ph1_ld4_pins),
+ .groups = ph1_ld4_groups,
+ .groups_count = ARRAY_SIZE(ph1_ld4_groups),
+ .functions = ph1_ld4_functions,
+ .functions_count = ARRAY_SIZE(ph1_ld4_functions),
+ .mux_bits = 8,
+ .reg_stride = 4,
+ .load_pinctrl = false,
+};
+
+static int ph1_ld4_pinctrl_probe(struct udevice *dev)
+{
+ return uniphier_pinctrl_probe(dev, &ph1_ld4_pinctrl_socdata);
+}
+
+static const struct udevice_id ph1_ld4_pinctrl_match[] = {
+ { .compatible = "socionext,ph1-ld4-pinctrl" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(ph1_ld4_pinctrl) = {
+ .name = "ph1-ld4-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(ph1_ld4_pinctrl_match),
+ .probe = ph1_ld4_pinctrl_probe,
+ .remove = uniphier_pinctrl_remove,
+ .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv),
+ .ops = &uniphier_pinctrl_ops,
+};
diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-ld6b.c b/drivers/pinctrl/uniphier/pinctrl-ph1-ld6b.c
new file mode 100644
index 0000000..8703a21
--- /dev/null
+++ b/drivers/pinctrl/uniphier/pinctrl-ph1-ld6b.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-uniphier.h"
+
+static const struct uniphier_pinctrl_pin ph1_ld6b_pins[] = {
+ UNIPHIER_PINCTRL_PIN(113, 0),
+ UNIPHIER_PINCTRL_PIN(114, 0),
+ UNIPHIER_PINCTRL_PIN(115, 0),
+ UNIPHIER_PINCTRL_PIN(116, 0),
+ UNIPHIER_PINCTRL_PIN(217, 0),
+ UNIPHIER_PINCTRL_PIN(218, 0),
+ UNIPHIER_PINCTRL_PIN(219, 0),
+ UNIPHIER_PINCTRL_PIN(220, 0),
+};
+
+static const unsigned emmc_pins[] = {36, 37, 38, 39, 40, 41, 42};
+static const unsigned emmc_muxvals[] = {1, 1, 1, 1, 1, 1, 1};
+static const unsigned emmc_dat8_pins[] = {43, 44, 45, 46};
+static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1};
+static const unsigned i2c0_pins[] = {109, 110};
+static const unsigned i2c0_muxvals[] = {0, 0};
+static const unsigned i2c1_pins[] = {111, 112};
+static const unsigned i2c1_muxvals[] = {0, 0};
+static const unsigned i2c2_pins[] = {115, 116};
+static const unsigned i2c2_muxvals[] = {1, 1};
+static const unsigned i2c3_pins[] = {118, 119};
+static const unsigned i2c3_muxvals[] = {1, 1};
+static const unsigned nand_pins[] = {30, 31, 32, 33, 34, 35, 36, 39, 40, 41,
+ 42, 43, 44, 45, 46};
+static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0};
+static const unsigned nand_cs1_pins[] = {37, 38};
+static const unsigned nand_cs1_muxvals[] = {0, 0};
+static const unsigned sd_pins[] = {47, 48, 49, 50, 51, 52, 53, 54, 55};
+static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned uart0_pins[] = {135, 136};
+static const unsigned uart0_muxvals[] = {3, 3};
+static const unsigned uart0b_pins[] = {11, 12};
+static const unsigned uart0b_muxvals[] = {2, 2};
+static const unsigned uart1_pins[] = {115, 116};
+static const unsigned uart1_muxvals[] = {0, 0};
+static const unsigned uart1b_pins[] = {113, 114};
+static const unsigned uart1b_muxvals[] = {1, 1};
+static const unsigned uart2_pins[] = {113, 114};
+static const unsigned uart2_muxvals[] = {2, 2};
+static const unsigned uart2b_pins[] = {86, 87};
+static const unsigned uart2b_muxvals[] = {1, 1};
+static const unsigned usb0_pins[] = {56, 57};
+static const unsigned usb0_muxvals[] = {0, 0};
+static const unsigned usb1_pins[] = {58, 59};
+static const unsigned usb1_muxvals[] = {0, 0};
+static const unsigned usb2_pins[] = {60, 61};
+static const unsigned usb2_muxvals[] = {0, 0};
+static const unsigned usb3_pins[] = {62, 63};
+static const unsigned usb3_muxvals[] = {0, 0};
+
+static const struct uniphier_pinctrl_group ph1_ld6b_groups[] = {
+ UNIPHIER_PINCTRL_GROUP(emmc),
+ UNIPHIER_PINCTRL_GROUP(emmc_dat8),
+ UNIPHIER_PINCTRL_GROUP(i2c0),
+ UNIPHIER_PINCTRL_GROUP(i2c1),
+ UNIPHIER_PINCTRL_GROUP(i2c2),
+ UNIPHIER_PINCTRL_GROUP(i2c3),
+ UNIPHIER_PINCTRL_GROUP(nand),
+ UNIPHIER_PINCTRL_GROUP(nand_cs1),
+ UNIPHIER_PINCTRL_GROUP(sd),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart0b),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart1b),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart2b),
+ UNIPHIER_PINCTRL_GROUP(usb0),
+ UNIPHIER_PINCTRL_GROUP(usb1),
+ UNIPHIER_PINCTRL_GROUP(usb2),
+ UNIPHIER_PINCTRL_GROUP(usb3),
+};
+
+static const char * const ph1_ld6b_functions[] = {
+ "emmc",
+ "i2c0",
+ "i2c1",
+ "i2c2",
+ "i2c3",
+ "nand",
+ "sd",
+ "uart0",
+ "uart1",
+ "uart2",
+ "usb0",
+ "usb1",
+ "usb2",
+ "usb3",
+};
+
+static struct uniphier_pinctrl_socdata ph1_ld6b_pinctrl_socdata = {
+ .pins = ph1_ld6b_pins,
+ .pins_count = ARRAY_SIZE(ph1_ld6b_pins),
+ .groups = ph1_ld6b_groups,
+ .groups_count = ARRAY_SIZE(ph1_ld6b_groups),
+ .functions = ph1_ld6b_functions,
+ .functions_count = ARRAY_SIZE(ph1_ld6b_functions),
+ .mux_bits = 8,
+ .reg_stride = 4,
+ .load_pinctrl = false,
+};
+
+static int ph1_ld6b_pinctrl_probe(struct udevice *dev)
+{
+ return uniphier_pinctrl_probe(dev, &ph1_ld6b_pinctrl_socdata);
+}
+
+static const struct udevice_id ph1_ld6b_pinctrl_match[] = {
+ { .compatible = "socionext,ph1-ld6b-pinctrl" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(ph1_ld6b_pinctrl) = {
+ .name = "ph1-ld6b-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(ph1_ld6b_pinctrl_match),
+ .probe = ph1_ld6b_pinctrl_probe,
+ .remove = uniphier_pinctrl_remove,
+ .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv),
+ .ops = &uniphier_pinctrl_ops,
+};
diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-pro4.c b/drivers/pinctrl/uniphier/pinctrl-ph1-pro4.c
new file mode 100644
index 0000000..b3eaf13
--- /dev/null
+++ b/drivers/pinctrl/uniphier/pinctrl-ph1-pro4.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-uniphier.h"
+
+static const struct uniphier_pinctrl_pin ph1_pro4_pins[] = {
+};
+
+static const unsigned emmc_pins[] = {40, 41, 42, 43, 51, 52, 53};
+static const unsigned emmc_muxvals[] = {1, 1, 1, 1, 1, 1, 1};
+static const unsigned emmc_dat8_pins[] = {44, 45, 46, 47};
+static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1};
+static const unsigned i2c0_pins[] = {142, 143};
+static const unsigned i2c0_muxvals[] = {0, 0};
+static const unsigned i2c1_pins[] = {144, 145};
+static const unsigned i2c1_muxvals[] = {0, 0};
+static const unsigned i2c2_pins[] = {146, 147};
+static const unsigned i2c2_muxvals[] = {0, 0};
+static const unsigned i2c3_pins[] = {148, 149};
+static const unsigned i2c3_muxvals[] = {0, 0};
+static const unsigned i2c6_pins[] = {308, 309};
+static const unsigned i2c6_muxvals[] = {6, 6};
+static const unsigned nand_pins[] = {40, 41, 42, 43, 44, 45, 46, 47, 48, 49,
+ 50, 51, 52, 53, 54};
+static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0};
+static const unsigned nand_cs1_pins[] = {131, 132};
+static const unsigned nand_cs1_muxvals[] = {1, 1};
+static const unsigned sd_pins[] = {150, 151, 152, 153, 154, 155, 156, 157, 158};
+static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned sd1_pins[] = {319, 320, 321, 322, 323, 324, 325, 326,
+ 327};
+static const unsigned sd1_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned uart0_pins[] = {127, 128};
+static const unsigned uart0_muxvals[] = {0, 0};
+static const unsigned uart1_pins[] = {129, 130};
+static const unsigned uart1_muxvals[] = {0, 0};
+static const unsigned uart2_pins[] = {131, 132};
+static const unsigned uart2_muxvals[] = {0, 0};
+static const unsigned uart3_pins[] = {88, 89};
+static const unsigned uart3_muxvals[] = {2, 2};
+static const unsigned usb0_pins[] = {180, 181};
+static const unsigned usb0_muxvals[] = {0, 0};
+static const unsigned usb1_pins[] = {182, 183};
+static const unsigned usb1_muxvals[] = {0, 0};
+static const unsigned usb2_pins[] = {184, 185};
+static const unsigned usb2_muxvals[] = {0, 0};
+static const unsigned usb3_pins[] = {186, 187};
+static const unsigned usb3_muxvals[] = {0, 0};
+
+static const struct uniphier_pinctrl_group ph1_pro4_groups[] = {
+ UNIPHIER_PINCTRL_GROUP(emmc),
+ UNIPHIER_PINCTRL_GROUP(emmc_dat8),
+ UNIPHIER_PINCTRL_GROUP(i2c0),
+ UNIPHIER_PINCTRL_GROUP(i2c1),
+ UNIPHIER_PINCTRL_GROUP(i2c2),
+ UNIPHIER_PINCTRL_GROUP(i2c3),
+ UNIPHIER_PINCTRL_GROUP(i2c6),
+ UNIPHIER_PINCTRL_GROUP(nand),
+ UNIPHIER_PINCTRL_GROUP(nand_cs1),
+ UNIPHIER_PINCTRL_GROUP(sd),
+ UNIPHIER_PINCTRL_GROUP(sd1),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart3),
+ UNIPHIER_PINCTRL_GROUP(usb0),
+ UNIPHIER_PINCTRL_GROUP(usb1),
+ UNIPHIER_PINCTRL_GROUP(usb2),
+ UNIPHIER_PINCTRL_GROUP(usb3),
+};
+
+static const char * const ph1_pro4_functions[] = {
+ "emmc",
+ "i2c0",
+ "i2c1",
+ "i2c2",
+ "i2c3",
+ "i2c6",
+ "nand",
+ "sd",
+ "sd1",
+ "uart0",
+ "uart1",
+ "uart2",
+ "uart3",
+ "usb0",
+ "usb1",
+ "usb2",
+ "usb3",
+};
+
+static struct uniphier_pinctrl_socdata ph1_pro4_pinctrl_socdata = {
+ .pins = ph1_pro4_pins,
+ .pins_count = ARRAY_SIZE(ph1_pro4_pins),
+ .groups = ph1_pro4_groups,
+ .groups_count = ARRAY_SIZE(ph1_pro4_groups),
+ .functions = ph1_pro4_functions,
+ .functions_count = ARRAY_SIZE(ph1_pro4_functions),
+ .mux_bits = 4,
+ .reg_stride = 8,
+ .load_pinctrl = true,
+};
+
+static int ph1_pro4_pinctrl_probe(struct udevice *dev)
+{
+ return uniphier_pinctrl_probe(dev, &ph1_pro4_pinctrl_socdata);
+}
+
+static const struct udevice_id ph1_pro4_pinctrl_match[] = {
+ { .compatible = "socionext,ph1-pro4-pinctrl" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(ph1_pro4_pinctrl) = {
+ .name = "ph1-pro4-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(ph1_pro4_pinctrl_match),
+ .probe = ph1_pro4_pinctrl_probe,
+ .remove = uniphier_pinctrl_remove,
+ .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv),
+ .ops = &uniphier_pinctrl_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-pro5.c b/drivers/pinctrl/uniphier/pinctrl-ph1-pro5.c
new file mode 100644
index 0000000..3749250
--- /dev/null
+++ b/drivers/pinctrl/uniphier/pinctrl-ph1-pro5.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-uniphier.h"
+
+static const struct uniphier_pinctrl_pin ph1_pro5_pins[] = {
+ UNIPHIER_PINCTRL_PIN(47, 0),
+ UNIPHIER_PINCTRL_PIN(48, 0),
+ UNIPHIER_PINCTRL_PIN(49, 0),
+ UNIPHIER_PINCTRL_PIN(50, 0),
+ UNIPHIER_PINCTRL_PIN(53, 0),
+ UNIPHIER_PINCTRL_PIN(54, 0),
+ UNIPHIER_PINCTRL_PIN(87, 0),
+ UNIPHIER_PINCTRL_PIN(88, 0),
+ UNIPHIER_PINCTRL_PIN(101, 0),
+ UNIPHIER_PINCTRL_PIN(102, 0),
+};
+
+static const unsigned emmc_pins[] = {36, 37, 38, 39, 40, 41, 42};
+static const unsigned emmc_muxvals[] = {0, 0, 0, 0, 0, 0, 0};
+static const unsigned emmc_dat8_pins[] = {43, 44, 45, 46};
+static const unsigned emmc_dat8_muxvals[] = {0, 0, 0, 0};
+static const unsigned i2c0_pins[] = {112, 113};
+static const unsigned i2c0_muxvals[] = {0, 0};
+static const unsigned i2c1_pins[] = {114, 115};
+static const unsigned i2c1_muxvals[] = {0, 0};
+static const unsigned i2c2_pins[] = {116, 117};
+static const unsigned i2c2_muxvals[] = {0, 0};
+static const unsigned i2c3_pins[] = {118, 119};
+static const unsigned i2c3_muxvals[] = {0, 0};
+static const unsigned i2c5_pins[] = {87, 88};
+static const unsigned i2c5_muxvals[] = {2, 2};
+static const unsigned i2c5b_pins[] = {196, 197};
+static const unsigned i2c5b_muxvals[] = {2, 2};
+static const unsigned i2c5c_pins[] = {215, 216};
+static const unsigned i2c5c_muxvals[] = {2, 2};
+static const unsigned i2c6_pins[] = {101, 102};
+static const unsigned i2c6_muxvals[] = {2, 2};
+static const unsigned nand_pins[] = {19, 20, 21, 22, 23, 24, 25, 28, 29, 30,
+ 31, 32, 33, 34, 35};
+static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0};
+static const unsigned nand_cs1_pins[] = {26, 27};
+static const unsigned nand_cs1_muxvals[] = {0, 0};
+static const unsigned sd_pins[] = {250, 251, 252, 253, 254, 255, 256, 257, 258};
+static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned uart0_pins[] = {47, 48};
+static const unsigned uart0_muxvals[] = {0, 0};
+static const unsigned uart0b_pins[] = {227, 228};
+static const unsigned uart0b_muxvals[] = {3, 3};
+static const unsigned uart1_pins[] = {49, 50};
+static const unsigned uart1_muxvals[] = {0, 0};
+static const unsigned uart2_pins[] = {51, 52};
+static const unsigned uart2_muxvals[] = {0, 0};
+static const unsigned uart3_pins[] = {53, 54};
+static const unsigned uart3_muxvals[] = {0, 0};
+static const unsigned usb0_pins[] = {124, 125};
+static const unsigned usb0_muxvals[] = {0, 0};
+static const unsigned usb1_pins[] = {126, 127};
+static const unsigned usb1_muxvals[] = {0, 0};
+static const unsigned usb2_pins[] = {128, 129};
+static const unsigned usb2_muxvals[] = {0, 0};
+
+static const struct uniphier_pinctrl_group ph1_pro5_groups[] = {
+ UNIPHIER_PINCTRL_GROUP(emmc),
+ UNIPHIER_PINCTRL_GROUP(emmc_dat8),
+ UNIPHIER_PINCTRL_GROUP(i2c0),
+ UNIPHIER_PINCTRL_GROUP(i2c1),
+ UNIPHIER_PINCTRL_GROUP(i2c2),
+ UNIPHIER_PINCTRL_GROUP(i2c3),
+ UNIPHIER_PINCTRL_GROUP(i2c5),
+ UNIPHIER_PINCTRL_GROUP(i2c5b),
+ UNIPHIER_PINCTRL_GROUP(i2c5c),
+ UNIPHIER_PINCTRL_GROUP(i2c6),
+ UNIPHIER_PINCTRL_GROUP(nand),
+ UNIPHIER_PINCTRL_GROUP(nand_cs1),
+ UNIPHIER_PINCTRL_GROUP(sd),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart0b),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart3),
+ UNIPHIER_PINCTRL_GROUP(usb0),
+ UNIPHIER_PINCTRL_GROUP(usb1),
+ UNIPHIER_PINCTRL_GROUP(usb2),
+};
+
+static const char * const ph1_pro5_functions[] = {
+ "emmc",
+ "i2c0",
+ "i2c1",
+ "i2c2",
+ "i2c3",
+ "i2c5",
+ "i2c6",
+ "nand",
+ "sd",
+ "uart0",
+ "uart1",
+ "uart2",
+ "uart3",
+ "usb0",
+ "usb1",
+ "usb2",
+};
+
+static struct uniphier_pinctrl_socdata ph1_pro5_pinctrl_socdata = {
+ .pins = ph1_pro5_pins,
+ .pins_count = ARRAY_SIZE(ph1_pro5_pins),
+ .groups = ph1_pro5_groups,
+ .groups_count = ARRAY_SIZE(ph1_pro5_groups),
+ .functions = ph1_pro5_functions,
+ .functions_count = ARRAY_SIZE(ph1_pro5_functions),
+ .mux_bits = 4,
+ .reg_stride = 8,
+ .load_pinctrl = true,
+};
+
+static int ph1_pro5_pinctrl_probe(struct udevice *dev)
+{
+ return uniphier_pinctrl_probe(dev, &ph1_pro5_pinctrl_socdata);
+}
+
+static const struct udevice_id ph1_pro5_pinctrl_match[] = {
+ { .compatible = "socionext,ph1-pro5-pinctrl" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(ph1_pro5_pinctrl) = {
+ .name = "ph1-pro5-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(ph1_pro5_pinctrl_match),
+ .probe = ph1_pro5_pinctrl_probe,
+ .remove = uniphier_pinctrl_remove,
+ .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv),
+ .ops = &uniphier_pinctrl_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c b/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c
new file mode 100644
index 0000000..5fafdb6
--- /dev/null
+++ b/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-uniphier.h"
+
+static const struct uniphier_pinctrl_pin ph1_sld8_pins[] = {
+ UNIPHIER_PINCTRL_PIN(32, 8),
+ UNIPHIER_PINCTRL_PIN(33, 8),
+ UNIPHIER_PINCTRL_PIN(34, 8),
+ UNIPHIER_PINCTRL_PIN(35, 8),
+ UNIPHIER_PINCTRL_PIN(36, 8),
+ UNIPHIER_PINCTRL_PIN(37, 8),
+ UNIPHIER_PINCTRL_PIN(38, 8),
+ UNIPHIER_PINCTRL_PIN(39, 8),
+ UNIPHIER_PINCTRL_PIN(40, 9),
+ UNIPHIER_PINCTRL_PIN(41, 0),
+ UNIPHIER_PINCTRL_PIN(42, 0),
+ UNIPHIER_PINCTRL_PIN(43, 0),
+ UNIPHIER_PINCTRL_PIN(44, 0),
+ UNIPHIER_PINCTRL_PIN(70, 0),
+ UNIPHIER_PINCTRL_PIN(71, 0),
+ UNIPHIER_PINCTRL_PIN(102, 10),
+ UNIPHIER_PINCTRL_PIN(103, 10),
+ UNIPHIER_PINCTRL_PIN(104, 11),
+ UNIPHIER_PINCTRL_PIN(105, 11),
+ UNIPHIER_PINCTRL_PIN(108, 13),
+ UNIPHIER_PINCTRL_PIN(109, 13),
+ UNIPHIER_PINCTRL_PIN(112, 0),
+ UNIPHIER_PINCTRL_PIN(113, 0),
+ UNIPHIER_PINCTRL_PIN(114, 0),
+ UNIPHIER_PINCTRL_PIN(115, 0),
+};
+
+static const unsigned emmc_pins[] = {21, 22, 23, 24, 25, 26, 27};
+static const unsigned emmc_muxvals[] = {1, 1, 1, 1, 1, 1, 1};
+static const unsigned emmc_dat8_pins[] = {28, 29, 30, 31};
+static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1};
+static const unsigned i2c0_pins[] = {102, 103};
+static const unsigned i2c0_muxvals[] = {0, 0};
+static const unsigned i2c1_pins[] = {104, 105};
+static const unsigned i2c1_muxvals[] = {0, 0};
+static const unsigned i2c2_pins[] = {108, 109};
+static const unsigned i2c2_muxvals[] = {2, 2};
+static const unsigned i2c3_pins[] = {108, 109};
+static const unsigned i2c3_muxvals[] = {3, 3};
+static const unsigned nand_pins[] = {15, 16, 17, 18, 19, 20, 21, 24, 25, 26,
+ 27, 28, 29, 30, 31};
+static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0};
+static const unsigned nand_cs1_pins[] = {22, 23};
+static const unsigned nand_cs1_muxvals[] = {0, 0};
+static const unsigned sd_pins[] = {32, 33, 34, 35, 36, 37, 38, 39, 40};
+static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned uart0_pins[] = {70, 71};
+static const unsigned uart0_muxvals[] = {3, 3};
+static const unsigned uart1_pins[] = {114, 115};
+static const unsigned uart1_muxvals[] = {0, 0};
+static const unsigned uart2_pins[] = {112, 113};
+static const unsigned uart2_muxvals[] = {1, 1};
+static const unsigned uart3_pins[] = {110, 111};
+static const unsigned uart3_muxvals[] = {1, 1};
+static const unsigned usb0_pins[] = {41, 42};
+static const unsigned usb0_muxvals[] = {0, 0};
+static const unsigned usb1_pins[] = {43, 44};
+static const unsigned usb1_muxvals[] = {0, 0};
+static const unsigned usb2_pins[] = {114, 115};
+static const unsigned usb2_muxvals[] = {1, 1};
+
+static const struct uniphier_pinctrl_group ph1_sld8_groups[] = {
+ UNIPHIER_PINCTRL_GROUP(emmc),
+ UNIPHIER_PINCTRL_GROUP(emmc_dat8),
+ UNIPHIER_PINCTRL_GROUP(i2c0),
+ UNIPHIER_PINCTRL_GROUP(i2c1),
+ UNIPHIER_PINCTRL_GROUP(i2c2),
+ UNIPHIER_PINCTRL_GROUP(i2c3),
+ UNIPHIER_PINCTRL_GROUP(nand),
+ UNIPHIER_PINCTRL_GROUP(nand_cs1),
+ UNIPHIER_PINCTRL_GROUP(sd),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart3),
+ UNIPHIER_PINCTRL_GROUP(usb0),
+ UNIPHIER_PINCTRL_GROUP(usb1),
+ UNIPHIER_PINCTRL_GROUP(usb2),
+};
+
+static const char * const ph1_sld8_functions[] = {
+ "emmc",
+ "i2c0",
+ "i2c1",
+ "i2c2",
+ "i2c3",
+ "nand",
+ "sd",
+ "uart0",
+ "uart1",
+ "uart2",
+ "uart3",
+ "usb0",
+ "usb1",
+ "usb2",
+};
+
+static struct uniphier_pinctrl_socdata ph1_sld8_pinctrl_socdata = {
+ .pins = ph1_sld8_pins,
+ .pins_count = ARRAY_SIZE(ph1_sld8_pins),
+ .groups = ph1_sld8_groups,
+ .groups_count = ARRAY_SIZE(ph1_sld8_groups),
+ .functions = ph1_sld8_functions,
+ .functions_count = ARRAY_SIZE(ph1_sld8_functions),
+ .mux_bits = 8,
+ .reg_stride = 4,
+ .load_pinctrl = false,
+};
+
+static int ph1_sld8_pinctrl_probe(struct udevice *dev)
+{
+ return uniphier_pinctrl_probe(dev, &ph1_sld8_pinctrl_socdata);
+}
+
+static const struct udevice_id ph1_sld8_pinctrl_match[] = {
+ { .compatible = "socionext,ph1-sld8-pinctrl" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(ph1_sld8_pinctrl) = {
+ .name = "ph1-sld8-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(ph1_sld8_pinctrl_match),
+ .probe = ph1_sld8_pinctrl_probe,
+ .remove = uniphier_pinctrl_remove,
+ .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv),
+ .ops = &uniphier_pinctrl_ops,
+};
diff --git a/drivers/pinctrl/uniphier/pinctrl-proxstream2.c b/drivers/pinctrl/uniphier/pinctrl-proxstream2.c
new file mode 100644
index 0000000..2cca69d
--- /dev/null
+++ b/drivers/pinctrl/uniphier/pinctrl-proxstream2.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-uniphier.h"
+
+static const struct uniphier_pinctrl_pin proxstream2_pins[] = {
+ UNIPHIER_PINCTRL_PIN(113, 0),
+ UNIPHIER_PINCTRL_PIN(114, 0),
+ UNIPHIER_PINCTRL_PIN(115, 0),
+ UNIPHIER_PINCTRL_PIN(116, 0),
+};
+
+static const unsigned emmc_pins[] = {36, 37, 38, 39, 40, 41, 42};
+static const unsigned emmc_muxvals[] = {9, 9, 9, 9, 9, 9, 9};
+static const unsigned emmc_dat8_pins[] = {43, 44, 45, 46};
+static const unsigned emmc_dat8_muxvals[] = {9, 9, 9, 9};
+static const unsigned i2c0_pins[] = {109, 110};
+static const unsigned i2c0_muxvals[] = {8, 8};
+static const unsigned i2c1_pins[] = {111, 112};
+static const unsigned i2c1_muxvals[] = {8, 8};
+static const unsigned i2c2_pins[] = {171, 172};
+static const unsigned i2c2_muxvals[] = {8, 8};
+static const unsigned i2c3_pins[] = {159, 160};
+static const unsigned i2c3_muxvals[] = {8, 8};
+static const unsigned i2c5_pins[] = {183, 184};
+static const unsigned i2c5_muxvals[] = {11, 11};
+static const unsigned i2c6_pins[] = {185, 186};
+static const unsigned i2c6_muxvals[] = {11, 11};
+static const unsigned nand_pins[] = {30, 31, 32, 33, 34, 35, 36, 39, 40, 41,
+ 42, 43, 44, 45, 46};
+static const unsigned nand_muxvals[] = {8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8};
+static const unsigned nand_cs1_pins[] = {37, 38};
+static const unsigned nand_cs1_muxvals[] = {8, 8};
+static const unsigned sd_pins[] = {47, 48, 49, 50, 51, 52, 53, 54, 55};
+static const unsigned sd_muxvals[] = {8, 8, 8, 8, 8, 8, 8, 8, 8};
+static const unsigned uart0_pins[] = {217, 218};
+static const unsigned uart0_muxvals[] = {8, 8};
+static const unsigned uart0b_pins[] = {179, 180};
+static const unsigned uart0b_muxvals[] = {10, 10};
+static const unsigned uart1_pins[] = {115, 116};
+static const unsigned uart1_muxvals[] = {8, 8};
+static const unsigned uart2_pins[] = {113, 114};
+static const unsigned uart2_muxvals[] = {8, 8};
+static const unsigned uart3_pins[] = {219, 220};
+static const unsigned uart3_muxvals[] = {8, 8};
+static const unsigned uart3b_pins[] = {181, 182};
+static const unsigned uart3b_muxvals[] = {10, 10};
+static const unsigned usb0_pins[] = {56, 57};
+static const unsigned usb0_muxvals[] = {8, 8};
+static const unsigned usb1_pins[] = {58, 59};
+static const unsigned usb1_muxvals[] = {8, 8};
+static const unsigned usb2_pins[] = {60, 61};
+static const unsigned usb2_muxvals[] = {8, 8};
+static const unsigned usb3_pins[] = {62, 63};
+static const unsigned usb3_muxvals[] = {8, 8};
+
+static const struct uniphier_pinctrl_group proxstream2_groups[] = {
+ UNIPHIER_PINCTRL_GROUP(emmc),
+ UNIPHIER_PINCTRL_GROUP(emmc_dat8),
+ UNIPHIER_PINCTRL_GROUP(i2c0),
+ UNIPHIER_PINCTRL_GROUP(i2c1),
+ UNIPHIER_PINCTRL_GROUP(i2c2),
+ UNIPHIER_PINCTRL_GROUP(i2c3),
+ UNIPHIER_PINCTRL_GROUP(i2c5),
+ UNIPHIER_PINCTRL_GROUP(i2c6),
+ UNIPHIER_PINCTRL_GROUP(nand),
+ UNIPHIER_PINCTRL_GROUP(nand_cs1),
+ UNIPHIER_PINCTRL_GROUP(sd),
+ UNIPHIER_PINCTRL_GROUP(uart0),
+ UNIPHIER_PINCTRL_GROUP(uart0b),
+ UNIPHIER_PINCTRL_GROUP(uart1),
+ UNIPHIER_PINCTRL_GROUP(uart2),
+ UNIPHIER_PINCTRL_GROUP(uart3),
+ UNIPHIER_PINCTRL_GROUP(uart3b),
+ UNIPHIER_PINCTRL_GROUP(usb0),
+ UNIPHIER_PINCTRL_GROUP(usb1),
+ UNIPHIER_PINCTRL_GROUP(usb2),
+ UNIPHIER_PINCTRL_GROUP(usb3),
+};
+
+static const char * const proxstream2_functions[] = {
+ "emmc",
+ "i2c0",
+ "i2c1",
+ "i2c2",
+ "i2c3",
+ "i2c5",
+ "i2c6",
+ "nand",
+ "sd",
+ "uart0",
+ "uart0b",
+ "uart1",
+ "uart2",
+ "uart3",
+ "uart3b",
+ "usb0",
+ "usb1",
+ "usb2",
+ "usb3",
+};
+
+static struct uniphier_pinctrl_socdata proxstream2_pinctrl_socdata = {
+ .pins = proxstream2_pins,
+ .pins_count = ARRAY_SIZE(proxstream2_pins),
+ .groups = proxstream2_groups,
+ .groups_count = ARRAY_SIZE(proxstream2_groups),
+ .functions = proxstream2_functions,
+ .functions_count = ARRAY_SIZE(proxstream2_functions),
+ .mux_bits = 8,
+ .reg_stride = 4,
+ .load_pinctrl = false,
+};
+
+static int proxstream2_pinctrl_probe(struct udevice *dev)
+{
+ return uniphier_pinctrl_probe(dev, &proxstream2_pinctrl_socdata);
+}
+
+static const struct udevice_id proxstream2_pinctrl_match[] = {
+ { .compatible = "socionext,proxstream2-pinctrl" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(proxstream2_pinctrl) = {
+ .name = "proxstream2-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(proxstream2_pinctrl_match),
+ .probe = proxstream2_pinctrl_probe,
+ .remove = uniphier_pinctrl_remove,
+ .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv),
+ .ops = &uniphier_pinctrl_ops,
+};
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
new file mode 100644
index 0000000..37a920c
--- /dev/null
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <mapmem.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <dm/device.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-uniphier.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int uniphier_pinctrl_get_groups_count(struct udevice *dev)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+
+ return priv->socdata->groups_count;
+}
+
+static const char *uniphier_pinctrl_get_group_name(struct udevice *dev,
+ unsigned selector)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+
+ return priv->socdata->groups[selector].name;
+}
+
+static int uniphier_pinmux_get_functions_count(struct udevice *dev)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+
+ return priv->socdata->functions_count;
+}
+
+static const char *uniphier_pinmux_get_function_name(struct udevice *dev,
+ unsigned selector)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+
+ return priv->socdata->functions[selector];
+}
+
+static void uniphier_pinconf_input_enable(struct udevice *dev, unsigned pin)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+ int pins_count = priv->socdata->pins_count;
+ const struct uniphier_pinctrl_pin *pins = priv->socdata->pins;
+ int i;
+
+ for (i = 0; i < pins_count; i++) {
+ if (pins[i].number == pin) {
+ unsigned int iectrl;
+ u32 tmp;
+
+ iectrl = uniphier_pin_get_iectrl(pins[i].data);
+ tmp = readl(priv->base + UNIPHIER_PINCTRL_IECTRL);
+ tmp |= 1 << iectrl;
+ writel(tmp, priv->base + UNIPHIER_PINCTRL_IECTRL);
+ }
+ }
+}
+
+static void uniphier_pinmux_set_one(struct udevice *dev, unsigned pin,
+ unsigned muxval)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+ unsigned mux_bits = priv->socdata->mux_bits;
+ unsigned reg_stride = priv->socdata->reg_stride;
+ unsigned reg, reg_end, shift, mask;
+ u32 tmp;
+
+ reg = UNIPHIER_PINCTRL_PINMUX_BASE + pin * mux_bits / 32 * reg_stride;
+ reg_end = reg + reg_stride;
+ shift = pin * mux_bits % 32;
+ mask = (1U << mux_bits) - 1;
+
+ /*
+ * If reg_stride is greater than 4, the MSB of each pinsel shall be
+ * stored in the offset+4.
+ */
+ for (; reg < reg_end; reg += 4) {
+ tmp = readl(priv->base + reg);
+ tmp &= ~(mask << shift);
+ tmp |= (mask & muxval) << shift;
+ writel(tmp, priv->base + reg);
+
+ muxval >>= mux_bits;
+ }
+
+ if (priv->socdata->load_pinctrl)
+ writel(1, priv->base + UNIPHIER_PINCTRL_LOAD_PINMUX);
+
+ /* some pins need input-enabling */
+ uniphier_pinconf_input_enable(dev, pin);
+}
+
+static int uniphier_pinmux_group_set(struct udevice *dev,
+ unsigned group_selector,
+ unsigned func_selector)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+ const struct uniphier_pinctrl_group *grp =
+ &priv->socdata->groups[group_selector];
+ int i;
+
+ for (i = 0; i < grp->num_pins; i++)
+ uniphier_pinmux_set_one(dev, grp->pins[i], grp->muxvals[i]);
+
+ return 0;
+}
+
+const struct pinctrl_ops uniphier_pinctrl_ops = {
+ .get_groups_count = uniphier_pinctrl_get_groups_count,
+ .get_group_name = uniphier_pinctrl_get_group_name,
+ .get_functions_count = uniphier_pinmux_get_functions_count,
+ .get_function_name = uniphier_pinmux_get_function_name,
+ .pinmux_group_set = uniphier_pinmux_group_set,
+ .set_state = pinctrl_generic_set_state,
+};
+
+int uniphier_pinctrl_probe(struct udevice *dev,
+ struct uniphier_pinctrl_socdata *socdata)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+ fdt_addr_t addr;
+ fdt_size_t size;
+
+ addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg",
+ &size);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->base = map_sysmem(addr, size);
+ if (!priv->base)
+ return -ENOMEM;
+
+ priv->socdata = socdata;
+
+ return 0;
+}
+
+int uniphier_pinctrl_remove(struct udevice *dev)
+{
+ struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
+
+ unmap_sysmem(priv->base);
+
+ return 0;
+}
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier.h b/drivers/pinctrl/uniphier/pinctrl-uniphier.h
new file mode 100644
index 0000000..7eaec6a
--- /dev/null
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PINCTRL_UNIPHIER_H__
+#define __PINCTRL_UNIPHIER_H__
+
+/* TODO: move this to include/linux/bug.h */
+#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#define UNIPHIER_PINCTRL_PINMUX_BASE 0x0
+#define UNIPHIER_PINCTRL_LOAD_PINMUX 0x700
+#define UNIPHIER_PINCTRL_IECTRL 0xd00
+
+#define UNIPHIER_PIN_ATTR_PACKED(iectrl) (iectrl)
+
+static inline unsigned int uniphier_pin_get_iectrl(unsigned long data)
+{
+ return data;
+}
+
+/**
+ * struct uniphier_pinctrl_pin - pin data for UniPhier SoC
+ *
+ * @number: pin number
+ * @data: additional per-pin data
+ */
+struct uniphier_pinctrl_pin {
+ unsigned number;
+ unsigned long data;
+};
+
+/**
+ * struct uniphier_pinctrl_group - pin group data for UniPhier SoC
+ *
+ * @name: pin group name
+ * @pins: array of pins that belong to the group
+ * @num_pins: number of pins in the group
+ * @muxvals: array of values to be set to pinmux registers
+ */
+struct uniphier_pinctrl_group {
+ const char *name;
+ const unsigned *pins;
+ unsigned num_pins;
+ const unsigned *muxvals;
+};
+
+/**
+ * struct uniphier_pinctrl_socdata - SoC data for UniPhier pin controller
+ *
+ * @pins: array of pin data
+ * @pins_count: number of pin data
+ * @groups: array of pin group data
+ * @groups_count: number of pin group data
+ * @functions: array of pinmux function names
+ * @functions_count: number of pinmux functions
+ * @mux_bits: bit width of each pinmux register
+ * @reg_stride: stride of pinmux register address
+ * @load_pinctrl: if true, LOAD_PINMUX register must be set to one for new
+ * values in pinmux registers to become really effective
+ */
+struct uniphier_pinctrl_socdata {
+ const struct uniphier_pinctrl_pin *pins;
+ int pins_count;
+ const struct uniphier_pinctrl_group *groups;
+ int groups_count;
+ const char * const *functions;
+ int functions_count;
+ unsigned mux_bits;
+ unsigned reg_stride;
+ bool load_pinctrl;
+};
+
+#define UNIPHIER_PINCTRL_PIN(a, b) \
+{ \
+ .number = a, \
+ .data = UNIPHIER_PIN_ATTR_PACKED(b), \
+}
+
+#define UNIPHIER_PINCTRL_GROUP(grp) \
+ { \
+ .name = #grp, \
+ .pins = grp##_pins, \
+ .num_pins = ARRAY_SIZE(grp##_pins), \
+ .muxvals = grp##_muxvals + \
+ BUILD_BUG_ON_ZERO(ARRAY_SIZE(grp##_pins) != \
+ ARRAY_SIZE(grp##_muxvals)), \
+ }
+
+/**
+ * struct uniphier_pinctrl_priv - private data for UniPhier pinctrl driver
+ *
+ * @base: base address of the pinctrl device
+ * @socdata: SoC specific data
+ */
+struct uniphier_pinctrl_priv {
+ void __iomem *base;
+ struct uniphier_pinctrl_socdata *socdata;
+};
+
+extern const struct pinctrl_ops uniphier_pinctrl_ops;
+
+int uniphier_pinctrl_probe(struct udevice *dev,
+ struct uniphier_pinctrl_socdata *socdata);
+
+int uniphier_pinctrl_remove(struct udevice *dev);
+
+#endif /* __PINCTRL_UNIPHIER_H__ */
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index d59564b..9109b7f 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -9,73 +9,9 @@
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
-#if defined(CONFIG_MACH_PH1_SLD3)
-#define CONFIG_DDR_NUM_CH0 2
-#define CONFIG_DDR_NUM_CH1 1
-#define CONFIG_DDR_NUM_CH2 1
-
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x20000000
-#define CONFIG_SDRAM1_BASE 0xc0000000
-#define CONFIG_SDRAM1_SIZE 0x20000000
-#define CONFIG_SDRAM2_BASE 0xc0000000
-#define CONFIG_SDRAM2_SIZE 0x10000000
-#endif
-
-#if defined(CONFIG_MACH_PH1_LD4)
-#define CONFIG_DDR_NUM_CH0 1
-#define CONFIG_DDR_NUM_CH1 1
-
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x10000000
-#define CONFIG_SDRAM1_BASE 0x90000000
-#define CONFIG_SDRAM1_SIZE 0x10000000
-#endif
-
-#if defined(CONFIG_MACH_PH1_PRO4)
-#define CONFIG_DDR_NUM_CH0 2
-#define CONFIG_DDR_NUM_CH1 2
-
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x20000000
-#define CONFIG_SDRAM1_BASE 0xa0000000
-#define CONFIG_SDRAM1_SIZE 0x20000000
-#endif
-
-#if defined(CONFIG_MACH_PH1_SLD8)
-#define CONFIG_DDR_NUM_CH0 1
-#define CONFIG_DDR_NUM_CH1 1
-
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x10000000
-#define CONFIG_SDRAM1_BASE 0x90000000
-#define CONFIG_SDRAM1_SIZE 0x10000000
-#endif
-
#define CONFIG_I2C_EEPROM
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-/*
- * Support card address map
- */
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-# define CONFIG_SUPPORT_CARD_BASE 0x03f00000
-# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000)
-# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000)
-# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# define CONFIG_SUPPORT_CARD_BASE 0x08000000
-# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000)
-# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630)
-# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000)
-#endif
-
#ifdef CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE
@@ -90,7 +26,8 @@
#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
+/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
+#define CONFIG_SMC911X_BASE 0
#define CONFIG_SMC911X_32_BIT
/*-----------------------------------------------------------------------
@@ -140,7 +77,7 @@
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
/* serial console configuration */
#define CONFIG_BAUDRATE 115200
@@ -191,7 +128,7 @@
#define CONFIG_NAND_DENALI_ECC_SIZE 1024
-#ifdef CONFIG_MACH_PH1_SLD3
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD3
#define CONFIG_SYS_NAND_REGS_BASE 0xf8100000
#define CONFIG_SYS_NAND_DATA_BASE 0xf8000000
#else
@@ -240,21 +177,17 @@
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
"tftpboot; bootm;"
-#define CONFIG_BOOTARGS " earlyprintk loglevel=8"
-
#ifdef CONFIG_FIT
#define CONFIG_BOOTFILE "fitImage"
#define LINUXBOOT_ENV_SETTINGS \
"fit_addr=0x00100000\0" \
"fit_addr_r=0x84100000\0" \
"fit_size=0x00f00000\0" \
- "norboot=run add_default_bootargs &&" \
+ "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
"bootm $fit_addr\0" \
- "nandboot=run add_default_bootargs &&" \
- "nand read $fit_addr_r $fit_addr $fit_size &&" \
+ "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
"bootm $fit_addr_r\0" \
- "tftpboot=run add_default_bootargs &&" \
- "tftpboot $fit_addr_r $bootfile &&" \
+ "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
"bootm $fit_addr_r\0"
#else
#define CONFIG_BOOTFILE "uImage"
@@ -270,15 +203,15 @@
"ramdisk_addr_r=0x84a00000\0" \
"ramdisk_size=0x00600000\0" \
"ramdisk_file=rootfs.cpio.uboot\0" \
- "norboot=run add_default_bootargs &&" \
+ "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
+ "setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \
+ "setexpr fdt_addr $nor_base + $fdt_addr &&" \
"bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
- "nandboot=run add_default_bootargs &&" \
- "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
+ "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
"bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
- "tftpboot=run add_default_bootargs &&" \
- "tftpboot $kernel_addr_r $bootfile &&" \
+ "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
"tftpboot $fdt_addr_r $fdt_file &&" \
"bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
@@ -287,35 +220,25 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"verify=n\0" \
+ "norbase=0x42000000\0" \
"nandupdate=nand erase 0 0x00100000 &&" \
"tftpboot u-boot-spl-dtb.bin &&" \
"nand write $loadaddr 0 0x00010000 &&" \
"tftpboot u-boot-dtb.img &&" \
"nand write $loadaddr 0x00010000 0x000f0000\0" \
- "add_default_bootargs=setenv bootargs $bootargs" \
- " console=ttyS0,$baudrate\0" \
LINUXBOOT_ENV_SETTINGS
/* Open Firmware flat tree */
#define CONFIG_OF_LIBFDT
-/* Memory Size & Mapping */
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE
-
-#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE
-/* Thre is no memory hole */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE)
-#else
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE)
-#endif
-#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \
- defined(CONFIG_MACH_PH1_SLD8)
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \
+ defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
#define CONFIG_SPL_TEXT_BASE 0x00040000
-#endif
-#if defined(CONFIG_MACH_PH1_PRO4)
+#else
#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif