mpc83xx, keymile boards: enable DM_ETH and add DTS
enable DTS support for keymile mpc83xx based boards.
get rid of compile warning:
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
Therefore done:
- add DTS for all mpc83xx based boards from keymile
mainly they are not mainlined to linux.
- add u-boot specific dtsi
- add stdout-path
- add missing ucc4 par_io definitions, which were
in board code, but not in linux DTS
- remove not used ethernet nodes
Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>
Series-to: u-boot
Series-version: 3
Series-changes: 3
- rebase patchset to current mainline commit
c0192950df
- update defconfig files
Series-changes: 2
- add patch which fixes Codingstyle errors in drivers/qe
- add patch which converts the mpc83xx based boards from
keymile to DM_ETH
Cover-letter:
powerpc, mpc83xx: add DM_ETH support
This patch series adds DM ethernet support for mpc83xx based
keymile boards.
Travis build:
END
diff --git a/arch/powerpc/dts/kmtuxa1.dts b/arch/powerpc/dts/kmtuxa1.dts
new file mode 100644
index 0000000..c2681c5
--- /dev/null
+++ b/arch/powerpc/dts/kmtuxa1.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ABB PGGA TUXA1 Device Tree Source
+ *
+ * Copyright (C) 2020 Heiko Schocher <hs@denx.de>
+ *
+ */
+
+/dts-v1/;
+
+#include "km8321.dtsi"
+
+/ {
+ model = "TUXA1";
+ compatible = "ABB,kmpbec8321";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet_piggy2;
+ serial0 = &serial0;
+ };
+};
+
+&par_io {
+ /* UCC5 as HDLC controller for ICN */
+ pio_ucc5: ucc_pin@04 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 2 0 1 0 2 0 /* TxD0 */
+ 2 8 2 0 2 0 /* RxD0 */
+ 2 29 2 0 2 0 /* CTS */
+ 3 30 2 0 1 0 /* ICN CLK */
+ >;
+ };
+
+ /* UCC4 Piggy Ethernet */
+ pio_ucc4: ucc_pin@03 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 3 4 3 0 2 0 /* MDIO */
+ 3 5 1 0 2 0 /* MDC */
+
+ 1 18 1 0 1 0 /* TxD0 */
+ 1 19 1 0 1 0 /* TxD1 */
+ 1 22 2 0 1 0 /* RxD0 */
+ 1 23 2 0 1 0 /* RxD1 */
+ 1 26 2 0 1 0 /* RX_ER */
+ 1 28 2 0 1 0 /* RX_DV */
+ 1 30 1 0 1 0 /* TX_EN */
+ 1 31 2 0 1 0 /* CRS */
+ 3 10 2 0 3 0 /* UCC4_RMII_CLK (CLK17) */
+ >;
+ };
+
+ pio_spi: spi_pin@01 {
+ pio-map = <
+ /*
+ *port pin dir open_drain assignment has_irq
+ * SPI_MOSI (PD0, bi, f3)
+ */
+ 3 0 3 0 1 0
+ /* SPI_MISO (PD1, bi, f3) */
+ 3 1 3 0 1 0
+ /* SPI_CLK (PD2, bi, f3) */
+ 3 2 3 0 1 0
+ >;
+ };
+};
+
+&localbus {
+ ranges = <0 0 0xf0000000 0x04000000 /* LB 0 Flash (boot) */
+ 1 0 0xe8000000 0x01000000 /* LB 1 PRIO1 and Piggy */
+ 2 0 0xa0000000 0x10000000 /* LB 2 LPXF */
+ 3 0 0xb0000000 0x10000000>; /* LB 3 PINC2 */
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0x00000000 0x04000000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 { /* 768KB */
+ label = "u-boot";
+ reg = <0 0xC0000>;
+ };
+ partition@c0000 { /* 128KB */
+ label = "env";
+ reg = <0xc0000 0x20000>;
+ };
+ partition@e0000 { /* 128KB */
+ label = "envred";
+ reg = <0xe0000 0x20000>;
+ };
+ partition@100000 { /* 64512KB */
+ label = "ubi0";
+ reg = <0x100000 0x3F00000>;
+ };
+ };
+};