Add support for IDS "NC650" board
diff --git a/board/nc650/nc650.c b/board/nc650/nc650.c
new file mode 100644
index 0000000..376dbbd
--- /dev/null
+++ b/board/nc650/nc650.c
@@ -0,0 +1,207 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+
+/*
+ * Memory Controller Using
+ *
+ * CS0 - Flash memory (0x40000000)
+ * CS3 - SDRAM (0x00000000}
+ */
+
+/* ------------------------------------------------------------------------- */
+
+#define _not_used_ 0xffffffff
+
+const uint sdram_table[] = {
+ /* single read. (offset 0 in upm RAM) */
+ 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+ 0x1ff77c47,
+
+ /* MRS initialization (offset 5) */
+
+ 0x1ff77c34, 0xefeabc34, 0x1fb57c35,
+
+ /* burst read. (offset 8 in upm RAM) */
+ 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+ 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* single write. (offset 18 in upm RAM) */
+ 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* burst write. (offset 20 in upm RAM) */
+ 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+ 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* refresh. (offset 30 in upm RAM) */
+ 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* exception. (offset 3c in upm RAM) */
+ 0x7ffffc07, _not_used_, _not_used_, _not_used_
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ puts ("Board: NC650\n");
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size8, size9;
+ long int size_b0 = 0;
+ unsigned long reg;
+
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
+
+ /*
+ * Preliminary prescaler for refresh (depends on number of
+ * banks): This value is selected for four cycles every 62.4 us
+ * with two SDRAM banks or four cycles every 31.2 us with one
+ * bank. It will be adjusted after memory sizing.
+ */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+ memctl->memc_mar = 0x00000088;
+
+ /*
+ * Map controller bank 1 to the SDRAM bank at
+ * preliminary address - these have to be modified after the
+ * SDRAM size has been determined.
+ */
+ memctl->memc_or3 = CFG_OR3_PRELIM;
+ memctl->memc_br3 = CFG_BR3_PRELIM;
+
+ memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+
+ udelay (200);
+
+ /* perform SDRAM initializsation sequence */
+
+ memctl->memc_mcr = 0x80006105; /* SDRAM bank 0 */
+ udelay (200);
+ memctl->memc_mcr = 0x80006230; /* SDRAM bank 0 - execute twice */
+ udelay (200);
+
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+
+ udelay (1000);
+
+ /*
+ * Check Bank 0 Memory Size for re-configuration
+ *
+ * try 8 column mode
+ */
+ size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE3_PRELIM,
+ SDRAM_MAX_SIZE);
+
+ udelay (1000);
+
+ /*
+ * try 9 column mode
+ */
+ size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE3_PRELIM,
+ SDRAM_MAX_SIZE);
+
+ udelay (1000);
+
+ if (size8 < size9) {
+ size_b0 = size9;
+ } else {
+ size_b0 = size8;
+ memctl->memc_mamr = CFG_MAMR_8COL;
+ udelay (500);
+ }
+
+ /*
+ * Adjust refresh rate depending on SDRAM type, both banks.
+ * For types > 128 MBit leave it at the current (fast) rate
+ */
+ if ((size_b0 < 0x02000000)) {
+ /* reduce to 15.6 us (62.4 us / quad) */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ udelay (1000);
+ }
+
+ /*
+ * Final mapping
+ */
+
+ memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+ /* adjust refresh rate depending on SDRAM type, one bank */
+ reg = memctl->memc_mptpr;
+ reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ memctl->memc_mptpr = reg;
+
+ udelay (10000);
+
+ return (size_b0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base,
+ long int maxsize)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ memctl->memc_mamr = mamr_value;
+
+ return (get_ram_size(base, maxsize));
+}