powerpc: P1010: Remove macro CONFIG_P1010
Replace CONFIG_P1010 with ARCH_P1010 in Kconfig and clean up existing
macros.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index f4d9f9d..9b6dd34 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -96,6 +96,7 @@
config TARGET_P1010RDB
bool "Support P1010RDB"
+ select ARCH_P1010
select SUPPORT_SPL
select SUPPORT_TPL
@@ -228,6 +229,9 @@
config ARCH_MPC8572
bool
+config ARCH_P1010
+ bool
+
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index e3f7dc8..de42b65 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -72,7 +72,7 @@
obj-$(CONFIG_ARCH_MPC8568) += mpc8568_serdes.o
obj-$(CONFIG_ARCH_MPC8569) += mpc8569_serdes.o
obj-$(CONFIG_ARCH_MPC8572) += mpc8572_serdes.o
-obj-$(CONFIG_P1010) += p1010_serdes.o
+obj-$(CONFIG_ARCH_P1010) += p1010_serdes.o
obj-$(CONFIG_P1011) += p1021_serdes.o
obj-$(CONFIG_P1012) += p1021_serdes.o
obj-$(CONFIG_P1013) += p1022_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 3ac3580..c20bc9d 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -707,7 +707,7 @@
#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
gd->arch.sdhc_clk = sys_info.freq_sdhc / 2;
#else
-#if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_P1010) ||\
+#if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010) ||\
defined(CONFIG_P1014)
gd->arch.sdhc_clk = gd->bus_clk;
#else
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 7d81dfc..adad3d3 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -140,7 +140,7 @@
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
-#elif defined(CONFIG_P1010)
+#elif defined(CONFIG_ARCH_P1010)
#define CONFIG_MAX_CPUS 1
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 4aeccbf..0cd90d1 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2169,7 +2169,7 @@
#define MPC85xx_PORDEVSR_IO_SEL 0x00600000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
#else
-#if defined(CONFIG_P1010)
+#if defined(CONFIG_ARCH_P1010)
#define MPC85xx_PORDEVSR_IO_SEL 0x00600000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
#elif defined(CONFIG_ARCH_BSC9132)
@@ -2181,7 +2181,7 @@
#else
#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19
-#endif /* if defined(CONFIG_P1010) */
+#endif /* if defined(CONFIG_ARCH_P1010) */
#endif
#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
@@ -2222,7 +2222,7 @@
u32 gpindr; /* General-purpose input data */
u8 res5[12];
u32 pmuxcr; /* Alt. function signal multiplex control */
-#if defined(CONFIG_P1010) || defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_P1010) || defined(CONFIG_P1014)
#define MPC85xx_PMUXCR_TSEC1_0_1588 0x40000000
#define MPC85xx_PMUXCR_TSEC1_0_RES 0xC0000000
#define MPC85xx_PMUXCR_TSEC1_1_1588_TRIG 0x10000000
@@ -2350,7 +2350,7 @@
#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100
#endif
u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
-#if defined(CONFIG_P1010) || defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_P1010) || defined(CONFIG_P1014)
#define MPC85xx_PMUXCR2_UART_GPIO 0x40000000
#define MPC85xx_PMUXCR2_UART_TDM 0x80000000
#define MPC85xx_PMUXCR2_UART_RES 0xC0000000