Fixes the crippled console output on PortuxG20.
In order to use the serial interface on the PortuxG20 we need to enable the
level converter first by setting the PC9 pin to high. The level converter needs
some time to settle so we have to use the mdelay() function to wait for some
time. Unfortunately we have no timers available at board_early_init_f() so we
enable the serial output early within board_postclk_init().
Now the U-Boot output looks fine:
| U-Boot 2012.07-00132-gaf1a3b0-dirty (Aug 16 2012 - 18:21:32)
|
| CPU: AT91SAM9G20
| Crystal frequency: 18.432 MHz
| CPU clock : 396.288 MHz
| Master clock : 132.096 MHz
| DRAM: 64 MiB
| WARNING: Caches not enabled
| NAND: 128 MiB
| In: serial
| Out: serial
| Err: serial
| Net: macb0
| Hit any key to stop autoboot: 0
Signed-off-by: Markus Hubig <mhubig@imko.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c
index 5e07bf8..06df0af 100644
--- a/board/taskit/stamp9g20/stamp9g20.c
+++ b/board/taskit/stamp9g20/stamp9g20.c
@@ -159,15 +159,28 @@
return 0;
}
+int board_postclk_init(void)
+{
+ /*
+ * Initialize the serial interface here, because be need a running
+ * timer to set PC9 to high and wait for some time to enable the
+ * level converter of the RS232 interface on the PortuxG20 board.
+ */
+
+#ifdef CONFIG_PORTUXG20
+ at91_set_gpio_output(AT91_PIN_PC9, 1);
+ mdelay(1);
+#endif
+ at91_seriald_hw_init();
+
+ return 0;
+}
+
int board_init(void)
{
/* Adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- /* Enable the serial interface */
- at91_set_gpio_output(AT91_PIN_PC9, 1);
- at91_seriald_hw_init();
-
stamp9G20_nand_hw_init();
#ifdef CONFIG_MACB
stamp9G20_macb_hw_init();
diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h
index a2a0156..a881eef 100644
--- a/include/configs/stamp9g20.h
+++ b/include/configs/stamp9g20.h
@@ -59,6 +59,7 @@
#define CONFIG_INITRD_TAG /* pass initrd param to kernel */
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#define CONFIG_BOARD_EARLY_INIT_f /* call board_early_init_f() */
+#define CONFIG_BOARD_POSTCLK_INIT /* call board_postclk_init() */
#define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */
/* setting board specific options */