ppc/85xx: add boot from NAND/eSDHC/eSPI support

The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
implements these three bootup methods in a unified way - all of these
use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM
which lets us use the SPD to initialize the SDRAM.

For all three bootup methods, the bootup process can be divided into two
stages: the first stage will initialize the corresponding controller,
configure the L2SRAM, then copy the second stage image to L2SRAM and
jump to it. The second stage image is just like the general U-Boot image
to configure all the hardware and boot up to U-Boot command line.

When boot from NAND, the eLBC controller will first load the first stage
image to internal 4K RAM buffer because it's also stored on the NAND
flash. The first stage image, also call 4K NAND loader, will initialize
the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K
NAND loader's code comes from the corresponding nand_spl directory, along
with the code twisted by CONFIG_NAND_SPL.

When boot from eSDHC/eSPI, there's no such a first stage image because
the CPU ROM code does the same work. It will initialize the L2SRAM
according to the config addr/word pairs on the fixed address and
initialize the eSDHC/eSPI controller, then load the second stage image
to L2SRAM and jump to it.

The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the
second stage image for all different bootup methods. It's set in the
board config file when one of the bootup methods above is selected.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index eeee7a9..c9e91a9 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -57,10 +57,12 @@
 	GOT_ENTRY(_GOT2_TABLE_)
 	GOT_ENTRY(_FIXUP_TABLE_)
 
+#ifndef CONFIG_NAND_SPL
 	GOT_ENTRY(_start)
 	GOT_ENTRY(_start_of_vectors)
 	GOT_ENTRY(_end_of_vectors)
 	GOT_ENTRY(transfer_to_handler)
+#endif
 
 	GOT_ENTRY(__init_end)
 	GOT_ENTRY(_end)
@@ -239,10 +241,11 @@
 
 #endif /* CONFIG_MPC8569 */
 
-	/* create a temp mapping in AS=1 to the 4M boot window */
 	lis     r6,FSL_BOOKE_MAS0(1, 15, 0)@h
 	ori     r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
 
+#ifndef CONFIG_SYS_RAMBOOT
+	/* create a temp mapping in AS=1 to the 4M boot window */
 	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
 	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
 
@@ -252,6 +255,20 @@
 	/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
 	lis     r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
 	ori     r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#else
+	/*
+	 * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
+	 * image has been relocated to TEXT_BASE on the second stage.
+	 */
+	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
+	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
+
+	lis     r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+	ori     r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+
+	lis     r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
 
 	mtspr   MAS0,r6
 	mtspr   MAS1,r7
@@ -363,6 +380,7 @@
 	bl	board_init_f
 	isync
 
+#ifndef CONFIG_NAND_SPL
 	. = EXC_OFF_SYS_RESET
 	.globl	_start_of_vectors
 _start_of_vectors:
@@ -817,6 +835,7 @@
 in32r:
 	lwbrx	r3,r0,r3
 	blr
+#endif  /* !CONFIG_NAND_SPL */
 
 /*------------------------------------------------------------------------------*/
 
@@ -1001,6 +1020,7 @@
 	mr	r4,r10		/* Destination Address		*/
 	bl	board_init_r
 
+#ifndef CONFIG_NAND_SPL
 	/*
 	 * Copy exception vector code to low memory
 	 *
@@ -1154,3 +1174,4 @@
 
 #include "fixed_ivor.S"
 	blr
+#endif /* !CONFIG_NAND_SPL */