* Patch by Mark Jonas: Remove config.tmp files only when
unconfiguring the board
* Adapt RMU board for bigger flash memory
* Test fix for ethernet problems on MPC5200
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 38db440..b0e9e44 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -232,7 +232,10 @@
* Ethernet configuration
*/
#define CONFIG_MPC5xxx_FEC 1
-#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
#define CONFIG_PHY_ADDR 0x00
/*
@@ -278,10 +281,10 @@
#ifdef CONFIG_MPC5200_DDR
-#define CFG_BOOTCS_START 0xFF800000
+#define CFG_BOOTCS_START (CFG_CS1_START + CFG_CS1_SIZE)
#define CFG_BOOTCS_SIZE 0x00800000
#define CFG_BOOTCS_CFG 0x00047801
-#define CFG_CS1_START 0xFF000000
+#define CFG_CS1_START CFG_FLASH_BASE
#define CFG_CS1_SIZE 0x00800000
#define CFG_CS1_CFG 0x00047800
diff --git a/include/configs/OXC.h b/include/configs/OXC.h
index 586b19f..787407c 100644
--- a/include/configs/OXC.h
+++ b/include/configs/OXC.h
@@ -181,8 +181,9 @@
*/
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR 0xFFF30000 /* Offset of Environment Sector */
+#define CFG_ENV_ADDR 0xFFF30000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x00010000 /* Total Size of Environment Sector */
+#define CFG_ENV_IS_EMBEDDED 1 /* short-cut compile-time test */
#define CONFIG_ENV_OVERWRITE 1 /* Allow modifying the environment */
/*
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 31f1e56..833d2d1 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -222,6 +222,7 @@
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment */
#define CFG_ENV_ADDR 0xFFFFE000 /* Address of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x2000 /* use the top-most 8k boot sector */
+#define CFG_ENV_IS_EMBEDDED 1 /* short-cut compile-time test */
#else
/* Final version: environment in EEPROM */
#define CFG_ENV_IS_IN_EEPROM 1
diff --git a/include/configs/rmu.h b/include/configs/rmu.h
index 68c35b4..c894d8a 100644
--- a/include/configs/rmu.h
+++ b/include/configs/rmu.h
@@ -49,8 +49,6 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"bootp; " \
@@ -151,15 +149,13 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xFF800000
-/*%%% #define CFG_FLASH_BASE 0xFFF00000 */
+#define CFG_FLASH_BASE (0-flash_info[0].size) /* Put flash at end */
#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
#endif
-#define CFG_MONITOR_BASE 0xFFF00000
-/*%%% #define CFG_MONITOR_BASE CFG_FLASH_BASE */
+#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*
@@ -173,18 +169,17 @@
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET 0x00740000 /* Offset of Environment Sector */
+#define CFG_ENV_ADDR ((TEXT_BASE) + 0x40000)
#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
/* Address and size of Redundant Environment Sector */
-#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
/*-----------------------------------------------------------------------
@@ -317,8 +312,8 @@
* BR0 and OR0 (FLASH)
*/
-#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */
-#define CFG_PRELIM_OR_AM 0xFE000000 /* OR addr mask */
+#define FLASH_BASE_PRELIM 0xFC000000 /* FLASH base - up to 64 MB of flash */
+#define CFG_PRELIM_OR_AM 0xFC000000 /* OR addr mask - map 64 MB */
/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
#define CFG_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
@@ -340,9 +335,13 @@
#define CFG_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
/* RPXLITE mem setting */
-#define CFG_BR3_PRELIM 0xFA400001 /* BCSR */
+#define CFG_NVRAM_BASE 0xFA000000 /* NVRAM & SRAM base */
+/* IMMR: 0xFA200000 IMMR base address - see above */
+#define CFG_BCSR_BASE 0xFA400000 /* BCSR base address */
+
+#define CFG_BR3_PRELIM (CFG_BCSR_BASE | BR_V) /* BCSR */
#define CFG_OR3_PRELIM 0xFFFF8910
-#define CFG_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */
+#define CFG_BR4_PRELIM (CFG_NVRAM_BASE | BR_PS_8 | BR_V) /* NVRAM & SRAM */
#define CFG_OR4_PRELIM 0xFFFE0970
/*
@@ -381,10 +380,10 @@
*
*/
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
+#define BCSR0 (CFG_BCSR_BASE + 0)
+#define BCSR1 (CFG_BCSR_BASE + 1)
+#define BCSR2 (CFG_BCSR_BASE + 2)
+#define BCSR3 (CFG_BCSR_BASE + 3)
#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
#define BCSR0_ENNVRAM 0x02 /* CS4# Control */