i2c: designware: Add Kconfig for designware_i2c_pci.c
As the Designware_i2c_pci.c uses ACPI APIs, If some SoCs (StarFive
JH7110) contain Designware i2c and PCI but do not use ACPI,
This file cannot be compiled. So add a new Kconfig for
designware_i2c_pci.c, which depends on ACPIGEN
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 5e81698..4c76fd7 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -231,6 +231,15 @@
controller is used in various SoCs, e.g. the ST SPEAr, Altera
SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs.
+config SYS_I2C_DW_PCI
+ bool "Designware PCI I2C Controller"
+ depends on SYS_I2C_DW && PCI && ACPIGEN
+ default y
+ help
+ Say yes here to select the Designware PCI I2C Host Controller.
+ This PCI I2C controller is the base on Desigware I2C host
+ controller.
+
config SYS_I2C_AST2600
bool "AST2600 I2C Controller"
depends on DM_I2C && ARCH_ASPEED
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 99545df..d5b85f3 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -18,9 +18,7 @@
obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o
obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
-ifdef CONFIG_PCI
-obj-$(CONFIG_SYS_I2C_DW) += designware_i2c_pci.o
-endif
+obj-$(CONFIG_SYS_I2C_DW_PCI) += designware_i2c_pci.o
obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o
obj-$(CONFIG_SYS_I2C_INTEL) += intel_i2c.o